Thanks a lot for all your help
Aaron.Li
-----Original Message-----
From: Samuel Cai [mailto:Samuel.Cai (at) ehealth-china.com]
Sent: Thursday, November 13, 2008 6:37 PM
To: hobbit (at) hswn.dk
Subject: RE: [hobbit] HTTP error 0
Thank you Henrik, this is the root cause!
We did not install openssl dev package, the "bbtest-net --version"
only returns hobbit version.
After we installed and recompile, problem is gone!
Thanks again.
Samuel Cai
-----Original Message-----
From: Henrik "Størner [mailto:henrik (at) hswn.dk]
Sent: Thursday, November 13, 2008 2:56 PM
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] HTTP error 0
In <980B46CCEFAE3F4A836BBF54E4DBCB160E46FED7 (at) SJEXVS01.ehi.ehealth.com>
"Samuel Cai" <Samuel.Cai (at) ehealth-china.com> writes:
In <980B46CCEFAE3F4A836BBF54E4DBCB160E3FFB8C (at) SJEXVS01.ehi.ehealth.com>
= "Aaron Li" <Aaron.Li (at) ehealth-china.com> writes:
When hobbit monitors the https site, it always gets the error " HTTP
error 0" like below, I appreciate a lot if anyone can give the =
solution,
I'm with Aaron in same company, the weird thing is, if we use wget,
then =
can still receive data, so not sure what's wrong.
Can you try running '~hobbit/server/bin/bbtest-net --version' just to
check the version number of your OpenSSL library ?
And can you get data using just the openssl client utility ? Like this:
openssl s_client -connect 10.20.30.40:443
(replace the IP with that of your server). If that succeeds and shows
you the server certificate then enter
GET / HTTP/1.0
and hit <enter> twice - this mimicks a simple HTTP request. Does that
work ? And how long does it take to complete ?
Finally, you could try modifying the code in
hobbit-4.2.0/bbnet/contest.c In there is a routine called
"socket_read"; delete the version in your file and replace it with the
version below. Recompile with "make bbnet-build"
and copy the new bbnet/bbtest-net program to ~hobbit/server/bin/ .
Then run it with the "--debug" option enabled, like
bbcmd bbtest-net --noping --debug HOSTNAME
to run the test of just this one host. Hopefully that will print out
some more info about what happens with that read that returns -1.
Regards,
Henrik
static int socket_read(tcptest_t *item, char *inbuf, int inbufsize) {
int res = 0;
char errtxt[1024];
if (item->svcinfo->flags & TCP_SSL) {
if (item->sslrunning) {
item->sslagain = 0;
res = SSL_read(item->ssldata, inbuf, inbufsize);
if (res < 0) {
switch (SSL_get_error (item->ssldata,
res)) {
case SSL_ERROR_WANT_READ:
case SSL_ERROR_WANT_WRITE:
item->sslagain = 1;
break;
default:
ERR_error_string(ERR_get_error(), errtxt);
dbgprintf("SSL read error
%s\n", errtxt);
break;
}
}
}
else {
/* SSL setup failed - flag 0 bytes read. */
res = 0;
}
}
else {
res = read(item->fd, inbuf, inbufsize);
if (res < 0) {
dbgprintf("Read error %s\n", strerror(errno));
}
}
if (res > 0) item->bytesread += res;
return res;
}
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk