RE: [hobbit] SPLITNCV and graphs

["Gore, David W" <david.gore (at) verizonbusiness.com>]

> -----Original Message-----
> From: Graham Nayler [mailto:graham.nayler (at) hallmarq.net] 
> Sent: Friday, May 08, 2009 15:53
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] SPLITNCV and graphs
> 
> Hmmm.... yes, I've just tried testing this on a SPLITNCV 
> test, and am seeing what you describe. I do get single lines 
> per graph on the specific test display for custom script 
> handling though. From brief perusal of the sources, I've not 
> yet found why it's different between custom script and 
> standard NCV handling.
> 
> (Scratching head smiley)
> 
> Graham

Well, Graham I tried to see if I could get custom scripts to create a
single graph for each status line but no luck.  I think we just need a
really good tutorial.  Since I only have three values to graph, I think
I will just break out my script to create 3 xymon columns guaranting a
single graph per value.

Thanks for all the help regardless!

~David

> 
> ----- Original Message -----
> From: "Gore, David W" <david.gore (at) verizonbusiness.com>
> To: <hobbit (at) hswn.dk>
> Sent: Friday, May 08, 2009 4:39 PM
> Subject: RE: [hobbit] SPLITNCV and graphs
> 
> 
> > -----Original Message-----
> > From: Graham Nayler [mailto:graham.nayler (at) hallmarq.net]
> > Sent: Friday, May 08, 2009 14:27
> > To: hobbit (at) hswn.dk
> > Subject: Re: [hobbit] SPLITNCV and graphs
> >
> > I'm doing what you're after using a custom script instead of
> > SPLITNCV, but the two are closely related, and I think this
> > works for what you are doing.
> >
> > In the file hobbitserver.cfg, add your test name to the
> > GRAPHS entry followed by "::1" i.e.
> > GRAPHS="la,disk.....,lines,ifmib::1,test::1"
> >
> > This sets the limit of the number of traces per graph, so set
> > it to "test::2" if e.g. you wanted two traces per graph
> >
> > BTW, I assume there is a typo in your DEF: line below, it
> > should be lambda not lanbda
> >
> > Graham
> >
> > ----- Original Message -----
> > From: "Gatis A." <gatis.anee (at) gmail.com>
> > To: <hobbit (at) hswn.dk>
> > Sent: Friday, May 08, 2009 10:32 AM
> > Subject: [hobbit] SPLITNCV and graphs
> >
> >
> > > Hi,
> > >
> > > How can I get SPLITNCV data to be drawn in seperate graphs
> > not in one.
> > >
> > > For isntance I am going to track:
> > >
> > > value1 : a
> > > value2 : b
> > > value3 : c
> > > valuex : x
> > > (count of "values" will change randomly)
> > >
> > > then i will get following rrd files (each tracking one value)
> > >
> > > test,value1.rrd
> > > test,value2.rrd
> > > test,value3,rrd
> > > test,valuex,rrd
> > >
> > > and with following hobbitgraph definition
> > >
> > > [test]
> > >        FNPATTERN test,value(.*).rrd
> > >        TITLE test
> > >        YAXIS TEST
> > >        DEF:p (at) RRDIDX@= (at) RRDFN@:lanbda:AVERAGE
> > >        LINE1:p (at) RRDIDX@# (at) COLOR@:@RRDPARAM@ aa
> > >
> > > I am getting one graph with three(or more) lines, but I 
> want to get
> > > three(or more) seperate graphs with one line each.
> > >
> > > Thanks!
> > >
> > > --
> > > Gatis
> > >
> 
> Graham,
> 
> Just an FYI, I did find your previous posts very helpful!  I certainly
> was able to use something like what Gatis has above to get a single
> multi-graph on the specific test column and multiple single 
> graphs under
> trends.  But can you get multiple single graphs under the 
> specific test
> column?
> 
> ~David
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
> 
> 
> 
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
> 
> 
>