[Xymon] Procs not reporting

[Jewel Makda]

On 10/3/2011 4:41 PM, Ralph Mitchell wrote:
> If your server is only showing  conn, http, info, smtp and trends, 
> then the client is not reporting anything.  So either:
>
>   1) xymon is not running on the client;
The process is running.
>   2) the client is reporting a different name to what the server expects;
I would like for it to report only under the first part of the name 
(i.e. name.domain.com and use name instead) When I put both of these in 
the config files it doesn't work but if I use the fqdn it starts 
reporting.  I did this and now I have a "Clear" status for files, ports, 
and procs.  I have spent hours trying different configs in my 
localclient.cfg on the server I wanted monitored but nothing is 
working.  I did check to see if the server was in ghosts clients and it 
is not here. So it is communicating with the xymon server since I am 
able to see all of my processes listed under the procs colums but what I 
have in my localclient.cfg files seems to be getting ignored.  Here is 
what I have:
HOST=xxx.xxxxx.xx
   UP 1h
   LOAD 5.0 10.0
   DISK * 90 95
   MEMPHYS 100 101
   MEMSWAP 50 80
   PROC httpd 1 20 red
   PROC qrunner 1 50 red

Here is what it looks like now on my server:


>   3) the client is sending reports to some ip that is not the xymon 
> server
>
> Do you see anything in the "Ghost Clients" list on the "Reports"  tab 
> in the web page??  If the client name is being reported wrong, that's 
> where it should show up.
>
> Ralph Mitchell
>
>
> On Mon, Oct 3, 2011 at 4:00 PM, Jewel Makda 
> <jewel.brueggeman-makda at washburn.edu 
> <mailto:jewel.brueggeman-makda at washburn.edu>> wrote:
>
>     I had a redhat client and have xymon running on it but it's not
>     reporting what I have in the localclient.cfg file.  It's only
>     reporting (conn, http, info, smtp and trends) which is what the
>     server has been configured to look at.  I have the following in my
>     file:
>
>
>     HOST="lists.domain"
>        UP 1h
>        PROC httpd 1 5
>        PROC postfix  1 15
>
>
>     Bothing is showing up under PROCS on my server.  I know I am
>     editing the right file and that the service is running.  Both
>     configs have the same host name - what am I doing wrong. I am
>     running the latest version of xymon.  I also have both machines on
>     the same network and they can see each other so I know it's not a
>     port blocking issue.
>
>     _______________________________________________
>     Xymon mailing list
>     Xymon at xymon.com <mailto:Xymon at xymon.com>
>     http://lists.xymon.com/mailman/listinfo/xymon
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20111004/2fac5cbe/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gbdeejcj.png
Type: image/png
Size: 2161 bytes
Desc: not available
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20111004/2fac5cbe/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: iiifjcjg.png
Type: image/png
Size: 846 bytes
Desc: not available
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20111004/2fac5cbe/attachment-0001.png>