[hobbit] Temperature Graphs

[michael nemeth]

Your scripts are NOT posting correctly on the Shire. Yes you've a link, 
which for me is blocked at work
and at home was not working either (forget why).

doctor at makelofine.org wrote:
> On Wed, 28 Jan 2009 10:33:42 -0500, Patrick Nixon <pnixon at gmail.com> wrote:
>   
>> The boxes I'm monitoring are windows box, so I had to go a slightly
>> convulted route to get the temperature information
>>
>> 1.) Install SpeedFan to enable monitoring for the desired temperature
>> probes
>> 2.) Configure SpeedFan to run as a service at boot up to enable
>> non-login monitoring
>> 3.) Installed ActiveState Perl to run the script to extract the
>> temperature information out of SpeedFan's log file and output the file
>> into BBNT's saved logs directory
>> 4.) Configured Windows to run the temp perl script every five minutes
>>
>> In terms of Linux servers, I know there are scripts out there that
>> will work on lm-sensors and you may have to tweak them to get the
>> right output, but I don't imagine it will be hard.   I just don't have
>> any linux boxes in this setup that have a working lm-sensors setup.
>>
>> If you'd like the script I wrote, even though it's probably horrible
>> perl, I can post it up.
>>
>> --Pat
>>
>> On Tue, Jan 27, 2009 at 3:34 PM, Gavin Leonard <gleonard at progrexion.com>
>> wrote:
>>     
>>> How is this done? I have some systems in a closet that we have problems
>>> with heat and I would love to be able to monitor this with hobbit..
>>>
>>> -Gavin
>>>
>>>
>>> -----Original Message-----
>>> From: Patrick Nixon [mailto:pnixon at gmail.com]
>>> Sent: Monday, January 26, 2009 7:54 PM
>>> To: hobbit at hswn.dk
>>> Subject: Re: [hobbit] Temperature Graphs
>>>
>>> okay,
>>>  I figured out that Xymon can handle the temperature graph
>>> automatically given the correct data format.
>>>
>>> I found documented format to be:
>>> Device             Temp(C)  Temp(F)
>>> -----------------------------------
>>> &green Temp1    42      90
>>> &green Temp2    34      80
>>> &green ACPI-Temp1       45      92
>>>
>>>
>>> It's working all fine.
>>>
>>> Thanks for all the help!
>>>
>>>       
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe at hswn.dk
>>
>>     
>
> On my side, I'm monitoring almost only linuxes. I wrote a script to get
> temp/speed/voltages from sensors using lm-sensors (and hddtemp for hdd
> temp...)
> it's tested on a few different machines (like 4), but seems to be not too
> much buggy.
> You can get it here :
> https://www.makelofine.org/xymon-plugins/hobbit-hardware-v0.1.tar.bz2
> If you take it, just tell me if you changed something in, so i'll include
> your changes.
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20090130/28cd928f/attachment.html>