[hobbit] Temperature Graphs

doctor at makelofine.org doctor at makelofine.org
Fri Jan 30 16:48:13 CET 2009


Can you tell me more about what's wrong with them ?
If you mean about output format, I created my own, and create graph
definition for it.
If you mean anything else, please tell me more, I'll see to correct them.


On Fri, 30 Jan 2009 08:08:44 -0500, michael nemeth
<michael.nemeth at lmco.com> wrote:
> Your scripts are NOT posting correctly on the Shire. Yes you've a link, 
> which for me is blocked at work
> and at home was not working either (forget why).
> 
> doctor at makelofine.org wrote:
>> On Wed, 28 Jan 2009 10:33:42 -0500, Patrick Nixon <pnixon at gmail.com>
>> wrote:
>>   
>>> The boxes I'm monitoring are windows box, so I had to go a slightly
>>> convulted route to get the temperature information
>>>
>>> 1.) Install SpeedFan to enable monitoring for the desired temperature
>>> probes
>>> 2.) Configure SpeedFan to run as a service at boot up to enable
>>> non-login monitoring
>>> 3.) Installed ActiveState Perl to run the script to extract the
>>> temperature information out of SpeedFan's log file and output the file
>>> into BBNT's saved logs directory
>>> 4.) Configured Windows to run the temp perl script every five minutes
>>>
>>> In terms of Linux servers, I know there are scripts out there that
>>> will work on lm-sensors and you may have to tweak them to get the
>>> right output, but I don't imagine it will be hard.   I just don't have
>>> any linux boxes in this setup that have a working lm-sensors setup.
>>>
>>> If you'd like the script I wrote, even though it's probably horrible
>>> perl, I can post it up.
>>>
>>> --Pat
>>>
>>> On Tue, Jan 27, 2009 at 3:34 PM, Gavin Leonard
<gleonard at progrexion.com>
>>> wrote:
>>>     
>>>> How is this done? I have some systems in a closet that we have
problems
>>>> with heat and I would love to be able to monitor this with hobbit..
>>>>
>>>> -Gavin
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Patrick Nixon [mailto:pnixon at gmail.com]
>>>> Sent: Monday, January 26, 2009 7:54 PM
>>>> To: hobbit at hswn.dk
>>>> Subject: Re: [hobbit] Temperature Graphs
>>>>
>>>> okay,
>>>>  I figured out that Xymon can handle the temperature graph
>>>> automatically given the correct data format.
>>>>
>>>> I found documented format to be:
>>>> Device             Temp(C)  Temp(F)
>>>> -----------------------------------
>>>> &green Temp1    42      90
>>>> &green Temp2    34      80
>>>> &green ACPI-Temp1       45      92
>>>>
>>>>
>>>> It's working all fine.
>>>>
>>>> Thanks for all the help!
>>>>
>>>>       
>>> To unsubscribe from the hobbit list, send an e-mail to
>>> hobbit-unsubscribe at hswn.dk
>>>
>>>     
>>
>> On my side, I'm monitoring almost only linuxes. I wrote a script to get
>> temp/speed/voltages from sensors using lm-sensors (and hddtemp for hdd
>> temp...)
>> it's tested on a few different machines (like 4), but seems to be not
too
>> much buggy.
>> You can get it here :
>> https://www.makelofine.org/xymon-plugins/hobbit-hardware-v0.1.tar.bz2
>> If you take it, just tell me if you changed something in, so i'll
include
>> your changes.
>>
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe at hswn.dk
>>
>>
>>
>>
> 



More information about the Xymon mailing list