[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [hobbit] Can´t receive client data



Hi,

I do a tcpdump on my system and it worked well, so my network isn´t a problem. The Hobbit Server is in the same subnetwork as the xymon server.

So i think my problem is on the two test clients. On the clients, a hobbit client is installed. Is that my problem ? Maybe i must install a xymon client to get data ?

regards Thorben

Zitat von Stewart L <stewartl42 (at) gmail.com>:

You could do a tcpdump on the system to make sure you are seeing the packets
hit the box...

tcpdump 'port 1984'

If you see packets, It's likely a hobbit issue. If not, you have a
networking issue.

Stew


On Thu, Aug 13, 2009 at 3:16 AM, Thorben Advena <advena (at) zdv.uni-tuebingen.de
wrote:

Zitat von Kevin Kelly <kkelly (at) lifetouch.com>:

 Did the ip address of the server change? What is BBDISP set to in
hobbitclient.cfg on the clients?


Hi Kelly,

BBDISP="134.2.3.205" --> this is my entry in the hobbitclient.cfg. The IP
Address is my new xymon server, but i can´t receive the data -.-



Zitat von Johan Sjöberg <johan.sjoberg (at) deltamanagement.se>:

 Did you have a working setup with Hobbit 4.2.0, with clients that sent
data correctly? Are you using the same IP or DNS name on the new server as
configured in the clients?

/Johan


Hi Johan,

we have a working Hobbit 4.2.0 Server with nearly 200 Clients, which send
data correctly. For my new Xymon Server i use not the same ip and not the
same hostname. I know that all my clients send the data to the hobbit
server, but i configured two clients to send the data over the hobbit client
to the xymon server.


Zitat von Stewart L <stewartl42 (at) gmail.com>:

 Firewall in the way?

Xymon uses port 1984.


Hi,

thanks for all your help. In the test stage i don´t start my firewall, so
no firewall in the way and the xymon port is open, too.



On 8/12/09, Thorben Advena <thorben.advena (at) zdv.uni-tuebingen.de> wrote:

Hi,

i installed a new server with sles11 and Xymon 4.2.3. I must move our
old server with the Hobbit Monitor 4.2.0 to the new machine.I reuse the
most of the configuration files from the Hobbit Monitor 4.2.0 to
configure Xymon.

My biggest problem ist, that xymon can´t recieve any data from my hobbit
clients on the other machines. So i can only see the conn-, info- and
trends Information.The other way around i recieve all data from my
server (Xymon Server) over the xymon client. So i can check cpu-, disk
status and so on. Must i install on all my machines a xymon client to
recieve data ? That would be devastating.

I´m a amateur in Xymon and need help, because i can´t find a answer for
my problem.

Kind regards
Thorben Advena

--
-----------------------------------------------------
Thorben Advena
Zentrale Systeme

Zentrum für Datenverarbeitung
Universität Tübingen

Wächterstraße 76
D-72074 Tübingen

Tel: +497071 29-70284
Fax: +497071 29-5912

Email: thorben.advena (at) zdv.uni-tuebingen.de


-----------------------------------------------------
Thorben Advena
Zentrale Systeme

Zentrum für Datenverarbeitung
Universität Tübingen

Wächterstraße 76
D-72074 Tübingen

Tel: +497071 29-70284
Fax: +497071 29-5912

Email: thorben.advena (at) zdv.uni-tuebingen.de




--
Stewart
--
An infinite number of mathematicians walk into a bar. The first one orders a
beer. The second orders half a beer. The third, a quarter of a beer. The
bartender says "You're all idiots", and pours two beers.




-----------------------------------------------------
Thorben Advena
Zentrale Systeme / Auszubildener

Zentrum für Datenverarbeitung
Universität Tübingen

Wächterstraße 76
D-72074 Tübingen

Tel: +497071 29-70284
Fax: +497071 29-5912

Email: thorben.advena (at) zdv.uni-tuebingen.de