[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [hobbit] CanÂt receive client data
- To: hobbit (at) hswn.dk
- Subject: RE: [hobbit] CanÂt receive client data
- From: Thorben Advena <advena (at) zdv.uni-tuebingen.de>
- Date: Thu, 13 Aug 2009 09:16:24 +0200
- References: <4A82ADFF.7030704 (at) zdv.uni-tuebingen.de> <027D0CFA48C98F4B87D51D40F36DE42703902B66 (at) ltivw-p-ml01.LIFETOUCH.NET>
- User-agent: Internet Messaging Program (IMP) 4.3.3
Zitat von Kevin Kelly <kkelly (at) lifetouch.com>:
Did the ip address of the server change? What is BBDISP set to in
hobbitclient.cfg on the clients?
Hi Kelly,
BBDISP="134.2.3.205" --> this is my entry in the hobbitclient.cfg. The
IP Address is my new xymon server, but i canÂt receive the data -.-
Zitat von Johan SjÃberg <johan.sjoberg (at) deltamanagement.se>:
Did you have a working setup with Hobbit 4.2.0, with clients that
sent data correctly? Are you using the same IP or DNS name on the
new server as configured in the clients?
/Johan
Hi Johan,
we have a working Hobbit 4.2.0 Server with nearly 200 Clients, which
send data correctly. For my new Xymon Server i use not the same ip and
not the same hostname. I know that all my clients send the data to the
hobbit server, but i configured two clients to send the data over the
hobbit client to the xymon server.
Zitat von Stewart L <stewartl42 (at) gmail.com>:
Firewall in the way?
Xymon uses port 1984.
Hi,
thanks for all your help. In the test stage i donÂt start my firewall,
so no firewall in the way and the xymon port is open, too.
On 8/12/09, Thorben Advena <thorben.advena (at) zdv.uni-tuebingen.de> wrote:
Hi,
i installed a new server with sles11 and Xymon 4.2.3. I must move our
old server with the Hobbit Monitor 4.2.0 to the new machine.I reuse the
most of the configuration files from the Hobbit Monitor 4.2.0 to
configure Xymon.
My biggest problem ist, that xymon canÂt recieve any data from my hobbit
clients on the other machines. So i can only see the conn-, info- and
trends Information.The other way around i recieve all data from my
server (Xymon Server) over the xymon client. So i can check cpu-, disk
status and so on. Must i install on all my machines a xymon client to
recieve data ? That would be devastating.
IÂm a amateur in Xymon and need help, because i canÂt find a answer for
my problem.
Kind regards
Thorben Advena
--
-----------------------------------------------------
Thorben Advena
Zentrale Systeme
Zentrum fÃr Datenverarbeitung
UniversitÃt TÃbingen
WÃchterstraÃe 76
D-72074 TÃbingen
Tel: +497071 29-70284
Fax: +497071 29-5912
Email: thorben.advena (at) zdv.uni-tuebingen.de
-----------------------------------------------------
Thorben Advena
Zentrale Systeme
Zentrum fÃr Datenverarbeitung
UniversitÃt TÃbingen
WÃchterstraÃe 76
D-72074 TÃbingen
Tel: +497071 29-70284
Fax: +497071 29-5912
Email: thorben.advena (at) zdv.uni-tuebingen.de