RE: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast IGNORE

["McGraw, Robert P" <rmcgraw (at) purdue.edu>]

Maybe this is to obvious but it bit my rear; be sure that your DEFAULT lines
are at the bottom of the file. 

Robert


> -----Original Message-----
> From: Eric Meddaugh [mailto:etmsys (at) rit.edu]
> Sent: Tuesday, August 26, 2008 4:01 PM
> To: hobbit (at) hswn.dk
> Subject: RE: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast
> IGNORE
> 
> 
> 
> That's the line we use in our configs and it works great:
> 
>         DISK    %^/home/.* IGNORE
> 
> That ignores all our auto_home entries on solaris.
> 
> ---Eric
> 
> -----Original Message-----
> From: Rolf Brusletto [mailto:rbrusletto (at) selero.com]
> Sent: Tuesday, August 26, 2008 15:58
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast
> IGNORE
> 
> I had tried this, with no luck as well... Forgot to mention I'm
> running 4.2.0 server and clients..
> 
> 
> 
> On Aug 26, 2008, at 1:51 PM, Eric Meddaugh wrote:
> 
> >
> > DISK	%^/autoyas.* IGNORE
> >
> >
> >
> >
> > -----Original Message-----
> > From: Rolf Brusletto [mailto:rbrusletto (at) selero.com]
> > Sent: Tuesday, August 26, 2008 15:47
> > To: hobbit (at) hswn.dk
> > Subject: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast
> > IGNORE
> >
> > I'm having an issue w/ hobbit-clients.cfg not working w/ DISK /xxxx
> > IGNORE...
> >
> > I've tried the following, none of which end up ignoring /autoyast....
> >
> >
> > Anybody have any ideas?
> >
> >
> >
> > DEFAULT
> >         # These are the built-in defaults.
> >         UP      1h
> >         LOAD    5.0 10.0
> >         DISK    * 90 95
> >         DISK    %^\/autoyas* IGNORE
> >         MEMPHYS 100 101
> >         MEMSWAP 50 80
> >         MEMACT  90 97
> >         PROC    ntpd 1
> >
> >
> > OR
> >
> >
> > DEFAULT
> >         # These are the built-in defaults.
> >         UP      1h
> >         LOAD    5.0 10.0
> >         DISK    * 90 95
> >         DISK    /autoyast  IGNORE
> >         MEMPHYS 100 101
> >         MEMSWAP 50 80
> >         MEMACT  90 97
> >         PROC    ntpd 1
> >
> >
> > OR
> >
> >
> > HOST=nyxx-pil-dma02dr
> >         PROC    postgres        1
> > 	DISK /autoyast	IGNORE
> >
> >
> > OR
> >
> > HOST=nyse-pil-dma02dr
> >         PROC    postgres        1
> > 	DISK 	%^\/autoyas* IGNORE
> >
> >
> >
> >
> > Thanks,
> >
> > Rolf Brusletto
> >
> > To unsubscribe from the hobbit list, send an e-mail to
> > hobbit-unsubscribe (at) hswn.dk
> >
> >
> >
> > To unsubscribe from the hobbit list, send an e-mail to
> > hobbit-unsubscribe (at) hswn.dk
> >
> >
> 
> 
> 
> Regards,
> 
> Rolf Brusletto
> Selero, Inc
> Senior Network Engineer
> O: 303.914.2807
> C: 303.638.8013
> E: rbrusletto (at) Selero.com
> 
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
> 
> 
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
> 
>