RE: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast IGNORE

["Eric Meddaugh" <etmsys (at) rit.edu>]

It usually picks it up, sometimes we do a "reload", other times we've
just restart it.  I don't think anything is needed for it to reread the
file.

-----Original Message-----
From: Rolf Brusletto [mailto:rbrusletto (at) selero.com] 
Sent: Tuesday, August 26, 2008 16:09
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast
IGNORE

Thanks... hobbit server doesn't need to be restarted does it ?


On Aug 26, 2008, at 2:00 PM, Eric Meddaugh wrote:

>
> That's the line we use in our configs and it works great:
>
>        DISK    %^/home/.* IGNORE
>
> That ignores all our auto_home entries on solaris.
>
> ---Eric
>
> -----Original Message-----
> From: Rolf Brusletto [mailto:rbrusletto (at) selero.com]
> Sent: Tuesday, August 26, 2008 15:58
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] hobbit-clients.cfg not recognizing DISK / 
> autoyast
> IGNORE
>
> I had tried this, with no luck as well... Forgot to mention I'm
> running 4.2.0 server and clients..
>
>
>
> On Aug 26, 2008, at 1:51 PM, Eric Meddaugh wrote:
>
>>
>> DISK	%^/autoyas.* IGNORE
>>
>>
>>
>>
>> -----Original Message-----
>> From: Rolf Brusletto [mailto:rbrusletto (at) selero.com]
>> Sent: Tuesday, August 26, 2008 15:47
>> To: hobbit (at) hswn.dk
>> Subject: [hobbit] hobbit-clients.cfg not recognizing DISK /autoyast
>> IGNORE
>>
>> I'm having an issue w/ hobbit-clients.cfg not working w/ DISK /xxxx
>> IGNORE...
>>
>> I've tried the following, none of which end up ignoring /autoyast....
>>
>>
>> Anybody have any ideas?
>>
>>
>>
>> DEFAULT
>>        # These are the built-in defaults.
>>        UP      1h
>>        LOAD    5.0 10.0
>>        DISK    * 90 95
>>        DISK    %^\/autoyas* IGNORE
>>        MEMPHYS 100 101
>>        MEMSWAP 50 80
>>        MEMACT  90 97
>>        PROC    ntpd 1
>>
>>
>> OR
>>
>>
>> DEFAULT
>>        # These are the built-in defaults.
>>        UP      1h
>>        LOAD    5.0 10.0
>>        DISK    * 90 95
>>        DISK    /autoyast  IGNORE
>>        MEMPHYS 100 101
>>        MEMSWAP 50 80
>>        MEMACT  90 97
>>        PROC    ntpd 1
>>
>>
>> OR
>>
>>
>> HOST=nyxx-pil-dma02dr
>>        PROC    postgres        1
>> 	DISK /autoyast	IGNORE
>>
>>
>> OR
>>
>> HOST=nyse-pil-dma02dr
>>        PROC    postgres        1
>> 	DISK 	%^\/autoyas* IGNORE
>>
>>
>>
>>
>> Thanks,
>>
>> Rolf Brusletto
>>
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe (at) hswn.dk
>>
>>
>>
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe (at) hswn.dk
>>
>>
>
>
>
> Regards,
>
> Rolf Brusletto
> Selero, Inc
> Senior Network Engineer
> O: 303.914.2807
> C: 303.638.8013
> E: rbrusletto (at) Selero.com
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>



Regards,

Rolf Brusletto
Selero, Inc
Senior Network Engineer
O: 303.914.2807
C: 303.638.8013
E: rbrusletto (at) Selero.com


To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk