RE: [hobbit] Debugging help: bbtest-net gets http test timing wrong

["Kauffman, Tom" <KauffmanT (at) nibco.com>]

I can't speak for Red Hat or Centos, but I'm running hobbit on 3 x86_64 SUSE systems with no issues. Http tests to both Apache and IIS servers, with Apache running on Win2003, linux, and AIX all run properly.

I did explicitly build hobbit on all three systems from the same source copy, but that was the extent of my 'customization' by server.

Tom

-----Original Message-----
From: Alan Sparks [mailto:asparks (at) doublesparks.net]
Sent: Tuesday, June 17, 2008 7:00 PM
To: hobbit (at) hswn.dk
Subject: Re: [hobbit] Debugging help: bbtest-net gets http test timing wrong

After some Googling, I have added "AcceptFilter http none" directives to
the Apache 2.2 servers, which hasn't really helped anything...

Perhaps I should ask:  Can anyone verify Hobbit works correctly on a
64-bit system?  Not should, but does, on a Centos 4 or RHEL 4 x86_64
install?

I see a lot of debugging trace stuff (dbgprint calls) in the contest and
httptest code.  Can anyone tell me how to enable it to trace what Hobbit
is doing?

Am really at a loss.  This can't be rocket science to get it to probe
HTTP correctly.  But a week later, I still cannot get it to match any
other monitoring tool's results.
-Alan

Alan Sparks wrote:
> tcpdumps show a couple of interesting points.
>
> 1) There are definitely no DNS lookups occurring as a consequence of
> the Hobbit probes.  No port 53 traffic out.
>
> 2) The packets from the Hobbit server, and the incoming packets to the
> Apache server, sometimes look like:
>
> 15:20:01.160095 IP (tos 0x0, ttl  62, id 31129, offset 0, flags [DF],
> proto 6, length: 60) hobbit.45116 > target.http: S [tcp sum ok]
> 265769416:265769416(0) win 17520 <mss 8760,sackOK,timestamp 143665233
> 0,nop,wscale 2>
>
> 15:20:04.159715 IP (tos 0x0, ttl  62, id 31131, offset 0, flags [DF],
> proto 6, length: 60) hobbit.45116 > target.http: S [tcp sum ok]
> 265769416:265769416(0) win 17520 <mss 8760,sackOK,timestamp 143668233
> 0,nop,wscale 2>
>
> 15:20:04.160223 IP (tos 0x0, ttl  62, id 31133, offset 0, flags [DF],
> proto 6, length: 40) hobbit.45116 > target.http: . [tcp sum ok]
> 265769417:265769417(0) ack 1051782089 win 17520
>
> So that accounts for three seconds... it appears there are 2 SYN
> packets, but the first isn't getting processed and there's a 3-second
> delay to the next SYN (which gets ACKed).  I don't know why this
> happens only with the Hobbit connections... and I don't know why the
> first SYN seems to be getting ignored.  Server is not at all busy.
>
> -Alan
> Tim McCloskey wrote:
>> I get that wget/curl always work.  Not sure what resolver settings
>> may be implemented differently for hobbit.
>>
>> Still thinking this may be unrelated to hobbit (even though wget/curl
>> work fine for you).  We have many apache boxes spanning multiple
>> networks running httpd versions 1.3, 2.0 and 2.2 that hobbit(4.2 with
>> allinone patch) likes just fine and reports accurate times (Seconds:
>> 0.nn).  We also have fairly proper forward and reverse DNS records
>> for the systems involved.
>>
>> I can't imagine hobbit parsing the wrong response times, but if that
>> is the case I wonder what external libraries are used (not hobbit
>> provided libs, as ours parse fine and are likely the same as yours).
>>
>> Anyway, good luck with the tcpdump.
>>
>> Regards,
>>
>> Tim
>>
>>
>>
>>
>>
>> Alan Sparks wrote:
>>> UseCanonicalName is off, and HostNameLookup is off, on every server,
>>> regardless of version.
>>> -Alan
>>>
>>> Tim McCloskey wrote:
>>>> What do you have for
>>>> UseCanonicalName
>>>> in the apache 2.0 boxes?
>>>>
>>
>>
>>
>>
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe (at) hswn.dk
>>
>>
>>
>
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
>



To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe (at) hswn.dk


CONFIDENTIALITY NOTICE:  This email and any attachments are for the 
exclusive and confidential use of the intended recipient.  If you are not
the intended recipient, please do not read, distribute or take action in 
reliance upon this message. If you have received this in error, please 
notify us immediately by return email and promptly delete this message 
and its attachments from your computer system. We do not waive  
attorney-client or work product privilege by the transmission of this
message.