[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [hobbit] network configuration
I'll take a stab at this...
You have some clients in the DMZ, and the hobbit server is on the
internal network, yes?
The DMZ must be on a specific subnet(s), so why couldn't the firewall be
set to forward 1984 to your server from that subnet only? Instead of
client -> server of
<anything> -> 1984 -> hobbit server,
then if frex your DMZ is 10.0.0.0/8, something like
10.0.0.0/8 -> 1984 -> hobbit server.
HTH, unless i've badly misunderstood the issue.
thomas.seglard.enata (at) cnp.fr wrote:
Hello,
I'm just writing to you to know if hobbit's clients could use one (and
only one) port e.g 1984 like hobbitd ? I got several servers into DMZ
and my network administrator asked me for the rules to apply in
firewalls...
He doesn't want to open port from DMZ to internal network (where my
hobbit's server is). So, I hope a workaround exists for this because I
think that clients connect to hobbit server. He would to prevent a
rule like any -> 1984 or 1984 -> any...
Sincerly,
Thomas Seglard
Ce message (et toutes ses pieces jointes eventuelles) est confidentiel
et etabli a l'intention exclusive de ses destinataires.
Toute utilisation de ce message non conforme a sa destination, toute
diffusion ou toute publication, totale ou partielle, est
interdite, sauf autorisation expresse.
L'internet ne permettant pas d'assurer l'integrite de ce message, CNP
Assurances et ses filiales declinent toute responsabilite
au titre de ce message, s'il a ete altere, deforme ou falsifie.
*****
This message and any attachments (the "message") are confidential and
intended solely for the addressees.
Any unauthorised use or dissemination is prohibited.
E-mails are susceptible to alteration.
Neither CNP Assurances nor any of its subsidiaries or affiliates shall
be liable for the message if altered, changed or falsified.
--
Rob Munsch
Solutions For Progress IT