[Xymon] disabled fqdn not working

[John Horne]

On Sat, 2018-09-01 at 08:07 -0600, Kris Springer wrote:
> I just built a new xymon server that will only be used on an internal network
> with 192 addresses.  I have FQDN="FALSE" in the xymonserver.cfg but the ping
> results shown on the xymon webpage show that the tests are using names to
> test instead of IP's.  Here's what I've got in the hosts.cfg file.
>
> 192.168.1.1    Cisco-RV320-Router    # !ssh https://192.168.1.1
>
> The conn results aren't pinging 192.168.1.1, they're pinging the name 'Cisco-
> RV320-Router' which responds to some outside server I don't recognize.  How
> do I force pinging to IP instead of name?
>
Use 'testip'. Example: ... # testip !ssh https://192.168.1.1



John.

--
John Horne | Senior Operations Analyst | Technology and Information Services
University of Plymouth | Drake Circus | Plymouth | Devon | PL4 8AA | UK
________________________________
[http://www.plymouth.ac.uk/images/email_footer.gif]<http://www.plymouth.ac.uk/worldclass>

This email and any files with it are confidential and intended solely for the use of the recipient to whom it is addressed. If you are not the intended recipient then copying, distribution or other use of the information contained is strictly prohibited and you should not rely on it. If you have received this email in error please let the sender know immediately and delete it from your system(s). Internet emails are not necessarily secure. While we take every care, University of Plymouth accepts no responsibility for viruses and it is your responsibility to scan emails and their attachments. University of Plymouth does not accept responsibility for any changes made after it was sent. Nothing in this email or its attachments constitutes an order for goods or services unless accompanied by an official order form.