[Xymon] Spliting tests to different pages.

[Chris Pretorius]

Thanx Fabian

I will most definitely investigate xymongen.

I will most likely encounter a similar situation in the future.

Kind regards

From: Fabian Wendlandt <fabian.wendlandt at innowerk-it.de>
Sent: Thursday, November 8, 2018 9:13 AM
To: Chris Pretorius <chrisp at lightstoneauto.co.za>; xymon at xymon.com
Subject: AW: Spliting tests to different pages.

Hi,

be aware that any update to hobbit-plugins which modifies the apt check will probably overwrite your changes again. (although it doesn't get updated very often)

After seeing this thread I've actually changed the xymongen options to not show apt checks on the non-green page and to not propagate the status, instead of changing the script.

Best regards,
Fabian

Von: Chris Pretorius <chrisp at lightstoneauto.co.za<mailto:chrisp at lightstoneauto.co.za>>
Gesendet: Donnerstag, 8. November 2018 08:03
An: Fabian Wendlandt <fabian.wendlandt at innowerk-it.de<mailto:fabian.wendlandt at innowerk-it.de>>; xymon at xymon.com<mailto:xymon at xymon.com>
Betreff: RE: Spliting tests to different pages.

Hi Fabian

Thank you, I appreciate your response.

I had to end up following the same route you guys did.

I updated the script to also test for security and cve updates
Added two tests in the script, 'yum list-security', and 'yum updateinfo list cves' which will send alerts for me to action.

I hope this way is efficient, time will tell but the my non green view can be used effectively by our ops teams.

Kind regards

From: Fabian Wendlandt <fabian.wendlandt at innowerk-it.de<mailto:fabian.wendlandt at innowerk-it.de>>
Sent: Monday, November 5, 2018 3:37 PM
To: Chris Pretorius <chrisp at lightstoneauto.co.za<mailto:chrisp at lightstoneauto.co.za>>; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: AW: Spliting tests to different pages.

Hi,

we're just using the yum/apt check as informational status since we are already patching on a regular schedule.
Since we did not want the check to clutter the non-green page, we've just change all occurrences of yellow/red in the perl script to green.
This way the status will always be green, but you can still check available updates by clicking on it.

Best regards,
Fabian

Von: Xymon <xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>> Im Auftrag von Chris Pretorius
Gesendet: Montag, 5. November 2018 12:53
An: xymon at xymon.com<mailto:xymon at xymon.com>
Betreff: [Xymon] Spliting tests to different pages.

Good day.

Hope all is well.

I configured yum tests on all my Linux servers. The test works great. Problem is doesn't matter how often you update the server, it wont be long before the yum test changes state.

We look at the non-green view to display current issues(on a large led screen), the non-green view will show all the servers that has a yellow or red alert associated with them, thus all the Linux servers will show.

The yum test is a script running on each server, configured clientlaunch.cfg for each server to run the script every n minites.

My question is if it is possible to configure xymon to display all the yum related info for all servers on a page and exclude the yum tests from the different pages where the servers are configured?

Or if there is a solution out there that I can implement to keep the non-green view to show current related issues, please send link to a guide that can assist me.

Kind Regards

[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/AUTOlogoW.png]



Chris Pretorius

[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/phone.png]

0872367740

[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/email.png]

chrisp at lightstone.co.za<mailto:chrisp at lightstone.co.za>

[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/web.png]

www.signio.co.za<http://www.signio.co.za>

[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/address.png]

Centurion Square, 3rd Floor, cnr Heuwel and Gordon Hood rd, Centurion




This communication is subject to Lightstone's email disclaimer<http://www.lightstone.co.za/portal/content/email-disclaimer.aspx>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/080145cc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 4816 bytes
Desc: image001.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/080145cc/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 503 bytes
Desc: image002.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/080145cc/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 589 bytes
Desc: image003.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/080145cc/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 574 bytes
Desc: image004.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/080145cc/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 505 bytes
Desc: image005.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/080145cc/attachment-0004.png>