[Xymon] flapping status

[Metron 6 (six)]

hello,

nothing changed.. ping tests are showing red/flapping, these are the only
tests i run..
all hosts with real ips are green.
the strange is that i run a ping test for hours, and says 0% packet loss,
but xymon keeps the host in ref/flapping condition..

--- 10.122.2.1 ping statistics ---

104332 packets transmitted, 104261 received, 0% packet loss, time
104457908ms

rtt min/avg/max/mdev = 70.537/74.760/110.730/1.034 ms



On Mon, Jul 31, 2017 at 4:16 AM, Phil Crooker <Phil.Crooker at orix.com.au>
wrote:

> This could be a number of things. The obvious question is what has changed
> (that you can see)? Any new routers, changes to the VPN setup? What tests
> are showing red/flapping? Are all tests for these affected hosts
> red/flapping? You say it is only those systems with a private network, do
> you have others that aren't a private network through the same VPN that are
> OK? What is happening at the VPN gateways at each end, can you run tcpdump
> on these systems to find any patterns? If tests are flapping, that means
> some packets are getting through, you should be able to see this on the
> gateways.
>
>
> hope this helps, Phil
>
>
> ------------------------------
> *From:* Xymon <xymon-bounces at xymon.com> on behalf of Metron 6 (six) <
> metron6 at gmail.com>
> *Sent:* Sunday, 30 July 2017 2:03 AM
> *To:* xymon at xymon.com
> *Subject:* [Xymon] flapping status
>
> hello all,
> the last 4-5 days, i have a major problem with my xymon server.
> I run it for several years, monitoring connectivity on misc servers on my
> local network.
> Xymon server is connected to my local network via a VPN, and it seems that
> the problem is with the computers that have a private ip (10.xx.xx.xx).
>
> when i restart xymon, everything seems ok for a few minutes.
> after this, all become red and i have a "flapping status" warning.
>
> i tried to change values in tasks.cfg with no result.
> i unistalled/installed xymon, with no result.
> my configuration is very close to the default, except hosts.cfg of course.
> i tried to ping for hours a host on my localnet, from xymon server,
> successfully, with no packet lost..
>
> can anyone help me with this ?
>
>
> --
>
> regards,
> Metron 6 (six)
>
> Metron6 at gmail.com
>
> --
>
> Please consider the environment before printing this e-mail
>
> This message from ORIX Australia may contain confidential and/or
> privileged information. If you are not the intended recipient, any use,
> disclosure or copying of this message (or of any attachments to it) is not
> authorised. If you have received this message in error, please notify the
> sender immediately and delete the message and any attachments from your
> system. Please inform the sender if you do not wish to receive further
> communications by email.
>
> ORIX has a Privacy Policy which outlines what kinds of personal
> information we collect and hold, how we may collect and handle it, and your
> rights regarding personal information. Please let us know if you would like
> a copy. The Privacy Policy and a Collection Statement are also available on
> our website <http://www.orix.com.au>.
>
> We do not accept liability for any loss or damage caused by any computer
> viruses or defects that may be transmitted with this message. We recommend
> you carry out your own checks for viruses or defects.
>



-- 

regards,
Metron 6 (six)

Metron6 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20170731/1f28792a/attachment.html>