[Xymon] 404 Not Found URL/xymon was not found on this server
Josh Luthman
josh at imaginenetworksllc.com
Thu Dec 12 14:52:44 CET 2013
Namei -mx that directory?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 12, 2013 8:15 AM, "Diep, David (OCTO-Contractor)" <David.Diep at dc.gov>
wrote:
> Good morning guys,
>
>
>
> I made a change to xymon-apache.conf, all I did was remove the trailing
> "/":
>
>
>
> From:
>
>
>
> Alias /xymon/ "/home/xymon/server/www/"
>
> <Directory "/home/xymon/server/www">
>
> Options Indexes FollowSymLinks Includes MultiViews
>
> Require all granted
>
> </Directory>
>
>
>
> To:
>
>
>
> Alias /xymon "/home/xymon/server/www"
>
> <Directory "/home/xymon/server/www">
>
> Options Indexes FollowSymLinks Includes MultiViews
>
> Require all granted
>
> </Directory>
>
>
>
> After the restart, I do see something different:
>
>
>
> At the http://ipaddress/xymon
>
>
>
> *Forbidden*
>
> You don't have permission to access /xymon on this server.
> ------------------------------
>
> *Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80*
>
>
>
>
>
> In the error_log in /var/httpd:
>
>
>
> [Thu Dec 12 07:54:26 2013] [error] [client 10.44.35.35] (13)Permission
> denied: access to /xymon denied
>
>
>
>
>
> I went back to xymon_apache.conf and re-added the original allow
> parameter. This did it!
>
>
>
> Alias /xymon "/home/xymon/server/www"
>
> <Directory "/home/xymon/server/www">
>
> Options Indexes FollowSymLinks Includes MultiViews
>
> Order allow,deny
>
> Allow from all
>
> </Directory>
>
>
>
> ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
>
> <Directory "/home/xymon/cgi-bin">
>
> AllowOverride None
>
> Options ExecCGI Includes
>
> Order allow,deny
>
> Allow from all
>
> </Directory>
>
>
>
> ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
>
> <Directory "/home/xymon/cgi-secure">
>
> AllowOverride None
>
> Options ExecCGI Includes
>
> Order allow,deny
>
> Allow from all
>
>
>
> I now can bring up the page… hooray! Time to continue playing.
>
>
>
> Thanks everyone!
>
>
>
>
>
> Look out for those in need this winter. When the temperature or wind chill
> is 32°F or below, the District issues a Hypothermia Alert. For assistance
> during an Alert, call the Shelter Hotline<http://dhs.dc.gov/page/hypothermia-alert-plan>at *1-800-535-7252
> <1-800-535-7252>* or *311*.
>
> -----Original Message-----
> From: Japheth Cleaver [mailto:cleaver at terabithia.org]
> Sent: Wednesday, December 11, 2013 3:23 PM
> To: Galen Johnson
> Cc: Josh Luthman; Root, Paul T; xymon at xymon.com; Diep, David
> (OCTO-Contractor)
> Subject: Re: [Xymon] 404 Not Found URL/xymon was not found on this server
>
>
>
> You can also rewrite the existing Alias line to drop the final slash too.
> eg:
>
> -Alias @XYMONHOSTURL@/ "@INSTALLWWWDIR@/"
>
> +Alias @XYMONHOSTURL@ "@INSTALLWWWDIR@"
>
>
>
> For me, that's:
>
> Alias /xymon "/var/www/xymon"
>
>
>
> The RPMs have done that for a while... haven't heard of any issues so far.
>
>
>
> -jc
>
>
>
>
>
> On Wed, December 11, 2013 11:46 am, Galen Johnson wrote:
>
> > To Josh's point, it requires the trailing slash. If you want to
>
> > ensure that it always redirects to /xymon/, just add a rewrite rule to
>
> > apache's httpd.conf...it may even work in the xymon.conf file:
>
> >
>
> >
>
> > RewriteEngine on
>
> > RewriteRule ^/xymon$ /xymon/ [R,L]
>
> >
>
> > =G=
>
> >
>
> > On 12/11/2013 02:38 PM, Josh Luthman wrote:
>
> >> Did you see my answer about requesting the wrong directory?
>
> >>
>
> >>
>
> >> Josh Luthman
>
> >> Office: 937-552-2340
>
> >> Direct: 937-552-2343
>
> >> 1100 Wayne St
>
> >> Suite 1337
>
> >> Troy, OH 45373
>
> >>
>
> >>
>
> >> On Wed, Dec 11, 2013 at 2:37 PM, Root, Paul T
>
> >> <Paul.Root at centurylink.com <mailto:Paul.Root at centurylink.com>> wrote:
>
> >>
>
> >> Any error messages in apache log files?
>
> >>
>
> >>
>
> >>
>
> >> *From:*Diep, David (OCTO-Contractor) [mailto:David.Diep at dc.gov
>
> >> <mailto:David.Diep at dc.gov <David.Diep at dc.gov>>]
>
> >> *Sent:* Wednesday, December 11, 2013 1:19 PM
>
> >> *To:* Root, Paul T; 'xymon at xymon.com <mailto:xymon at xymon.com<xymon at xymon.com>
> >'
>
> >>
>
> >>
>
> >> *Subject:* RE: 404 Not Found URL/xymon was not found on this
>
> >> server
>
> >>
>
> >>
>
> >>
>
> >> Hi Paul,
>
> >>
>
> >>
>
> >>
>
> >> I saw that thread and I did go to the config file to make sure...
>
> >>
>
> >>
>
> >>
>
> >> XYMONSERVERROOT="/home/xymon" # Where Xymon is
>
> >> installed
>
> >>
>
> >> XYMONSERVERLOGS="/var/log/xymon" #
>
> >> Directory for server logs. The xymon user must have write-access
>
> >> here.
>
> >>
>
> >> XYMONCLIENTHOME="/home/xymon/client" # XYMONHOME
>
> >> directory for the client
>
> >>
>
> >>
>
> >>
>
> >> XYMONSERVERHOSTNAME="lsypf01a.in.domain" # The hostname of
>
> >> your server
>
> >>
>
> >> XYMONSERVERIP="10.82.10.54" # The IP-address
>
> >> of your server. Use the real one, not 127.0.0.1 .
>
> >>
>
> >> XYMONSERVEROS="linux" # The operating system of
>
> >> your server. linux,freebsd,solaris,hpux,aix,osf
>
> >>
>
> >>
>
> >>
>
> >> XYMONSERVERWWWNAME="lsypf01a.in.domain" # The name used
>
> >> for this hosts' webserver
>
> >>
>
> >> XYMONSERVERWWWURL="/xymon" # The top URL for the
>
> >> Xymon webpages
>
> >>
>
> >> XYMONSERVERCGIURL="/xymon-cgi" # The URL for the Xymon
>
> >> CGI scripts.
>
> >>
>
> >> XYMONSERVERSECURECGIURL="/xymon-seccgi" # The URL for the secured
>
> >> Xymon CGI scripts.
>
> >>
>
> >>
>
> >>
>
> >> # XYMONNETWORK="foo" # The network
>
> >> location, makes xymonnet test only hosts with NET:foo
>
> >>
>
> >> # You only need to
>
> >> set this if you have multiple network test servers with
>
> >>
>
> >> # a shared
>
> >> hosts.cfg file.
>
> >>
>
> >>
>
> >>
>
> >> # Make sure the path includes the directories where you have
>
> >> fping, mail and (optionally) ntpdate installed,
>
> >>
>
> >> # as well as the XYMONHOME/bin directory where all of the Xymon
>
> >> programs reside.
>
> >>
>
> >>
> PATH="/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/home/xymon/server/bin"
>
> >>
>
> >> SHELL="/bin/sh" # Shell to use
>
> >> when forking programs
>
> >>
>
> >>
>
> >>
>
> >> # Some systems need extra settings e.g. to locate run-time
>
> >> libraries.
>
> >>
>
> >> # You can add these extra settings here:
>
> >>
>
> >>
>
> >>
>
> >>
>
> >>
>
> >> # Default settings for "delayred" and "delayyellow" parameters in
>
> >> hosts.cfg
>
> >>
>
> >> DELAYRED="" # Format:
>
> >> status:delay[,status:delay - e.g. "cpu:15,disk:30"
>
> >>
>
> >> DELAYYELLOW="" # Format:
>
> >> status:delay[,status:delay - e.g. "cpu:15,disk:30"
>
> >>
>
> >>
>
> >>
>
> >>
>
> >>
>
> >> ##### Normally you do not need to modify anything below this point
>
> >> #####
>
> >>
>
> >>
>
> >>
>
> >> # General settings
>
> >>
>
> >> XYMONDPORT="1984" # Portnumber where xymond listens
>
> >>
>
> >> XYMSRV="10.82.10.54" # IP of a single Xymon server
>
> >>
>
> >> XYMSERVERS="" # IP of multiple Xymon servers. If
>
> >> used, XYMSRV must be 0.0.0.0
>
> >>
>
> >> FQDN="TRUE" # Use fully-qualified hostnames
>
> >> internally. Keep it TRUE unless you know better.
>
> >>
>
> >>
>
> >>
>
> >>
>
> >>
>
> >> I restarted xymon first and then apache... still no luck.
>
> >>
>
> >>
>
> >>
>
> >> [xymon at lsypf01a ~]$ ./server/xymon.sh restart
>
> >>
>
> >> Xymon stopped
>
> >>
>
> >> Xymon started
>
> >>
>
> >> [root at lsypf01a etc]# service httpd restart
>
> >>
>
> >> Stopping httpd: [ OK ]
>
> >>
>
> >> Starting httpd: [ OK ]
>
> >>
>
> >>
>
> >>
>
> >> http://10.82.10.54 is served, but not http://10.82.10.54/xymon
>
> >>
>
> >>
>
> >>
>
> >> D'oh.
>
> >>
>
> >>
>
> >>
>
> >> *David Diep**|* IBM Z Series Network Architect | Office of the
>
> >> Chief Technology Officer
>
> >>
>
> >> Integrated Platform Services | 200 I Steet SE | Washington DC,
>
> >> 20003**
>
> >>
>
> >> Phone: 202.727.1475 <tel:202.727.1475 <202.727.1475>> *| *Mobile
> Phone:
>
> >> 202.727.3976 <tel:202.727.3976 <202.727.3976>> *| *
> Email:_David.Diep at dc.gov
>
> >> <mailto:David.Diep at dc.gov <David.Diep at dc.gov>>_
>
> >>
>
> >> Website:www.octo.dc.gov <http://www.octo.dc.gov/> *| **Telework
>
> >> day: Thursday*
>
> >>
>
> >>
>
> >>
>
> >> *From:*Root, Paul T [mailto:Paul.Root at CenturyLink.com]
>
> >> *Sent:* Wednesday, December 11, 2013 2:04 PM
>
> >> *To:* Diep, David (OCTO-Contractor); 'xymon at xymon.com
>
> >> <mailto:xymon at xymon.com <xymon at xymon.com>>'
>
> >> *Subject:* RE: 404 Not Found URL/xymon was not found on this
>
> >> server
>
> >>
>
> >>
>
> >>
>
> >> We just had this one.
>
> >>
>
> >>
>
> >>
>
> >> You see that xymon is listening on 0.0.0.0:1984
>
> >> <http://0.0.0.0:1984>. You need to change you XYMONSERVERIP
>
> >> environment in xymonserver.cfg to the IP address of the server.
>
> >> Also set XYMONSERVERHOSTNAME to the hostname and XZYMSRV to the ip
>
> >> address as well. Then restart xymon.
>
> >>
>
> >>
>
> >>
>
> >> I'm assuming you did restart apache after you put the
>
> >> xymon-apache.conf into /etc/httpd/conf.d, right?
>
> >>
>
> >>
>
> >>
>
> >> *From:*Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Diep,
>
> >> David (OCTO-Contractor)
>
> >> *Sent:* Wednesday, December 11, 2013 12:48 PM
>
> >> *To:* xymon at xymon.com <mailto:xymon at xymon.com <xymon at xymon.com>>
>
> >> *Subject:* [Xymon] 404 Not Found URL/xymon was not found on this
>
> >> server
>
> >>
>
> >>
>
> >>
>
> >> Hi Everyone,
>
> >>
>
> >>
>
> >>
>
> >> I'm very very new to XYMON, as a matter of fact, I just installed
>
> >> it 15 minutes ago. I thought I was cruising along quite nicely
>
> >> until I tested it. This is what I received:
>
> >>
>
> >> *Not Found*
>
> >>
>
> >> The requested URL /xymon was not found on this server.
>
> >>
>
> >>
>
> >> ---------------------------------------------------------------------
>
> >> ---
>
> >>
>
> >> /Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80/
>
> >>
>
> >>
>
> >>
>
> >> Xymon is running, that I can confirm:
>
> >>
>
> >>
>
> >>
>
> >> [xymon at lsypf01a ~]$ ./server/xymon.sh status
>
> >>
>
> >> Xymon (xymonlaunch) running with PID 4826
>
> >>
>
> >> [xymon at lsypf01a ~]$
>
> >>
>
> >>
>
> >>
>
> >> Here is my xymon-apache.conf, I made changes from what I've read
>
> >> in the older subscription messages:
>
> >>
>
> >>
>
> >>
>
> >> Alias /xymon/ "/home/xymon/server/www/"
>
> >>
>
> >> <Directory "/home/xymon/server/www">
>
> >>
>
> >> Options Indexes FollowSymLinks Includes MultiViews
>
> >>
>
> >> Require all granted
>
> >>
>
> >> </Directory>
>
> >>
>
> >>
>
> >>
>
> >> ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
>
> >>
>
> >> <Directory "/home/xymon/cgi-bin">
>
> >>
>
> >> AllowOverride None
>
> >>
>
> >> Options ExecCGI Includes
>
> >>
>
> >> Require all granted
>
> >>
>
> >> </Directory>
>
> >>
>
> >>
>
> >>
>
> >> ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
>
> >>
>
> >> <Directory "/home/xymon/cgi-secure">
>
> >>
>
> >> AllowOverride None
>
> >>
>
> >> Options ExecCGI Includes
>
> >>
>
> >> Require all granted
>
> >>
>
> >>
>
> >>
>
> >> Various logs in /var/log/xymon:
>
> >>
>
> >>
>
> >>
>
> >> Xymonlaunch.log:
>
> >>
>
> >> 2013-12-11 13:24:00 xymonlaunch starting
>
> >>
>
> >> 2013-12-11 13:24:00 Loading tasklist configuration from
>
> >> /home/xymon/server/etc/tasks.cfg
>
> >>
>
> >> 2013-12-11 13:24:00 Cannot open directory
>
> >> /home/xymon/server/etc/tasks.d
>
> >>
>
> >> 2013-12-11 13:24:00 Loading hostnames
>
> >>
>
> >> 2013-12-11 13:24:00 Loading saved state
>
> >>
>
> >> 2013-12-11 13:24:00 Setting up network listener on 0.0.0.0:1984
>
> >> <http://0.0.0.0:1984>
>
> >>
>
> >> 2013-12-11 13:24:00 Setting up signal handlers
>
> >>
>
> >> 2013-12-11 13:24:00 Setting up xymond channels
>
> >>
>
> >> 2013-12-11 13:24:00 Setting up logfiles
>
> >>
>
> >>
>
> >>
>
> >> Rrd-data.log:
>
> >>
>
> >> 2013-12-11 13:34:13 Peer at 0.0.0.0:0 <http://0.0.0.0:0> failed:
>
> >> Broken pipe
>
> >>
>
> >> 2013-12-11 13:34:13 Peer not up, flushing message queue
>
> >>
>
> >> 2013-12-11 13:34:13 exec() failed for child command xymond_rrd: No
>
> >> such file or directory
>
> >>
>
> >> 2013-12-11 13:34:13 Child process 5357 died: Exit status 1
>
> >>
>
> >>
>
> >>
>
> >> *David Diep*
>
> >>
>
> >>
>
> >>
>
> >> * *
>
> >>
>
> >> Look out for those in need this winter. When the temperature or
>
> >> wind chill is 32°F or below, the District issues a Hypothermia
>
> >> Alert. For assistance during an Alert, call the Shelter Hotline
>
> >> <http://dhs.dc.gov/page/hypothermia-alert-plan>at *1-800-535-7252
>
> >> <tel:1-800-535-7252 <1-800-535-7252>>* or *311*.
>
> >>
>
> >>
>
> >>
>
> >>
>
> >> _______________________________________________
>
> >> Xymon mailing list
>
> >> Xymon at xymon.com <mailto:Xymon at xymon.com <Xymon at xymon.com>>
>
> >> http://lists.xymon.com/mailman/listinfo/xymon
>
> >>
>
> >>
>
> >>
>
> >>
>
> >> _______________________________________________
>
> >> Xymon mailing list
>
> >> Xymon at xymon.com
>
> >> http://lists.xymon.com/mailman/listinfo/xymon
>
> >
>
> > _______________________________________________
>
> > Xymon mailing list
>
> > Xymon at xymon.com
>
> > http://lists.xymon.com/mailman/listinfo/xymon
>
> >
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20131212/5a758eb4/attachment.html>
More information about the Xymon
mailing list