[Xymon] 404 Not Found URL/xymon was not found on this server
Diep, David (OCTO-Contractor)
David.Diep at dc.gov
Thu Dec 12 14:15:10 CET 2013
Good morning guys,
I made a change to xymon-apache.conf, all I did was remove the trailing "/":
From:
Alias /xymon/ "/home/xymon/server/www/"
<Directory "/home/xymon/server/www">
Options Indexes FollowSymLinks Includes MultiViews
Require all granted
</Directory>
To:
Alias /xymon "/home/xymon/server/www"
<Directory "/home/xymon/server/www">
Options Indexes FollowSymLinks Includes MultiViews
Require all granted
</Directory>
After the restart, I do see something different:
At the http://ipaddress/xymon
Forbidden
You don't have permission to access /xymon on this server.
________________________________
Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80
In the error_log in /var/httpd:
[Thu Dec 12 07:54:26 2013] [error] [client 10.44.35.35] (13)Permission denied: access to /xymon denied
I went back to xymon_apache.conf and re-added the original allow parameter. This did it!
Alias /xymon "/home/xymon/server/www"
<Directory "/home/xymon/server/www">
Options Indexes FollowSymLinks Includes MultiViews
Order allow,deny
Allow from all
</Directory>
ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
<Directory "/home/xymon/cgi-bin">
AllowOverride None
Options ExecCGI Includes
Order allow,deny
Allow from all
</Directory>
ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
<Directory "/home/xymon/cgi-secure">
AllowOverride None
Options ExecCGI Includes
Order allow,deny
Allow from all
I now can bring up the page... hooray! Time to continue playing.
Thanks everyone!
Look out for those in need this winter. When the temperature or wind chill is 32°F or below, the District issues a Hypothermia Alert. For assistance during an Alert, call the Shelter Hotline<http://dhs.dc.gov/page/hypothermia-alert-plan> at 1-800-535-7252 or 311.
-----Original Message-----
From: Japheth Cleaver [mailto:cleaver at terabithia.org]
Sent: Wednesday, December 11, 2013 3:23 PM
To: Galen Johnson
Cc: Josh Luthman; Root, Paul T; xymon at xymon.com; Diep, David (OCTO-Contractor)
Subject: Re: [Xymon] 404 Not Found URL/xymon was not found on this server
You can also rewrite the existing Alias line to drop the final slash too. eg:
-Alias @XYMONHOSTURL@/ "@INSTALLWWWDIR@/"
+Alias @XYMONHOSTURL@ "@INSTALLWWWDIR@"
For me, that's:
Alias /xymon "/var/www/xymon"
The RPMs have done that for a while... haven't heard of any issues so far.
-jc
On Wed, December 11, 2013 11:46 am, Galen Johnson wrote:
> To Josh's point, it requires the trailing slash. If you want to
> ensure that it always redirects to /xymon/, just add a rewrite rule to
> apache's httpd.conf...it may even work in the xymon.conf file:
>
>
> RewriteEngine on
> RewriteRule ^/xymon$ /xymon/ [R,L]
>
> =G=
>
> On 12/11/2013 02:38 PM, Josh Luthman wrote:
>> Did you see my answer about requesting the wrong directory?
>>
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Wed, Dec 11, 2013 at 2:37 PM, Root, Paul T
>> <Paul.Root at centurylink.com <mailto:Paul.Root at centurylink.com<mailto:Paul.Root at centurylink.com%20%3cmailto:Paul.Root at centurylink.com>>> wrote:
>>
>> Any error messages in apache log files?
>>
>>
>>
>> *From:*Diep, David (OCTO-Contractor) [mailto:David.Diep at dc.gov
>> <mailto:David.Diep at dc.gov>]
>> *Sent:* Wednesday, December 11, 2013 1:19 PM
>> *To:* Root, Paul T; 'xymon at xymon.com <mailto:xymon at xymon.com>'
>>
>>
>> *Subject:* RE: 404 Not Found URL/xymon was not found on this
>> server
>>
>>
>>
>> Hi Paul,
>>
>>
>>
>> I saw that thread and I did go to the config file to make sure...
>>
>>
>>
>> XYMONSERVERROOT="/home/xymon" # Where Xymon is
>> installed
>>
>> XYMONSERVERLOGS="/var/log/xymon" #
>> Directory for server logs. The xymon user must have write-access
>> here.
>>
>> XYMONCLIENTHOME="/home/xymon/client" # XYMONHOME
>> directory for the client
>>
>>
>>
>> XYMONSERVERHOSTNAME="lsypf01a.in.domain" # The hostname of
>> your server
>>
>> XYMONSERVERIP="10.82.10.54" # The IP-address
>> of your server. Use the real one, not 127.0.0.1 .
>>
>> XYMONSERVEROS="linux" # The operating system of
>> your server. linux,freebsd,solaris,hpux,aix,osf
>>
>>
>>
>> XYMONSERVERWWWNAME="lsypf01a.in.domain" # The name used
>> for this hosts' webserver
>>
>> XYMONSERVERWWWURL="/xymon" # The top URL for the
>> Xymon webpages
>>
>> XYMONSERVERCGIURL="/xymon-cgi" # The URL for the Xymon
>> CGI scripts.
>>
>> XYMONSERVERSECURECGIURL="/xymon-seccgi" # The URL for the secured
>> Xymon CGI scripts.
>>
>>
>>
>> # XYMONNETWORK="foo" # The network
>> location, makes xymonnet test only hosts with NET:foo
>>
>> # You only need to
>> set this if you have multiple network test servers with
>>
>> # a shared
>> hosts.cfg file.
>>
>>
>>
>> # Make sure the path includes the directories where you have
>> fping, mail and (optionally) ntpdate installed,
>>
>> # as well as the XYMONHOME/bin directory where all of the Xymon
>> programs reside.
>>
>> PATH="/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/home/xymon/server/bin"
>>
>> SHELL="/bin/sh" # Shell to use
>> when forking programs
>>
>>
>>
>> # Some systems need extra settings e.g. to locate run-time
>> libraries.
>>
>> # You can add these extra settings here:
>>
>>
>>
>>
>>
>> # Default settings for "delayred" and "delayyellow" parameters in
>> hosts.cfg
>>
>> DELAYRED="" # Format:
>> status:delay[,status:delay - e.g. "cpu:15,disk:30"
>>
>> DELAYYELLOW="" # Format:
>> status:delay[,status:delay - e.g. "cpu:15,disk:30"
>>
>>
>>
>>
>>
>> ##### Normally you do not need to modify anything below this point
>> #####
>>
>>
>>
>> # General settings
>>
>> XYMONDPORT="1984" # Portnumber where xymond listens
>>
>> XYMSRV="10.82.10.54" # IP of a single Xymon server
>>
>> XYMSERVERS="" # IP of multiple Xymon servers. If
>> used, XYMSRV must be 0.0.0.0
>>
>> FQDN="TRUE" # Use fully-qualified hostnames
>> internally. Keep it TRUE unless you know better.
>>
>>
>>
>>
>>
>> I restarted xymon first and then apache... still no luck.
>>
>>
>>
>> [xymon at lsypf01a ~]$ ./server/xymon.sh restart
>>
>> Xymon stopped
>>
>> Xymon started
>>
>> [root at lsypf01a etc]# service httpd restart
>>
>> Stopping httpd: [ OK ]
>>
>> Starting httpd: [ OK ]
>>
>>
>>
>> http://10.82.10.54 is served, but not http://10.82.10.54/xymon
>>
>>
>>
>> D'oh.
>>
>>
>>
>> *David Diep**|* IBM Z Series Network Architect | Office of the
>> Chief Technology Officer
>>
>> Integrated Platform Services | 200 I Steet SE | Washington DC,
>> 20003**
>>
>> Phone: 202.727.1475 <tel:202.727.1475> *| *Mobile Phone:
>> 202.727.3976 <tel:202.727.3976> *| *Email:_David.Diep at dc.gov
>> <mailto:David.Diep at dc.gov>_
>>
>> Website:www.octo.dc.gov <http://www.octo.dc.gov/> *| **Telework
>> day: Thursday*
>>
>>
>>
>> *From:*Root, Paul T [mailto:Paul.Root at CenturyLink.com]<mailto:[mailto:Paul.Root at CenturyLink.com]>
>> *Sent:* Wednesday, December 11, 2013 2:04 PM
>> *To:* Diep, David (OCTO-Contractor); 'xymon at xymon.com
>> <mailto:xymon at xymon.com>'
>> *Subject:* RE: 404 Not Found URL/xymon was not found on this
>> server
>>
>>
>>
>> We just had this one.
>>
>>
>>
>> You see that xymon is listening on 0.0.0.0:1984
>> <http://0.0.0.0:1984>. You need to change you XYMONSERVERIP
>> environment in xymonserver.cfg to the IP address of the server.
>> Also set XYMONSERVERHOSTNAME to the hostname and XZYMSRV to the ip
>> address as well. Then restart xymon.
>>
>>
>>
>> I'm assuming you did restart apache after you put the
>> xymon-apache.conf into /etc/httpd/conf.d, right?
>>
>>
>>
>> *From:*Xymon [mailto:xymon-bounces at xymon.com]<mailto:[mailto:xymon-bounces at xymon.com]> *On Behalf Of *Diep,
>> David (OCTO-Contractor)
>> *Sent:* Wednesday, December 11, 2013 12:48 PM
>> *To:* xymon at xymon.com<mailto:xymon at xymon.com> <mailto:xymon at xymon.com>
>> *Subject:* [Xymon] 404 Not Found URL/xymon was not found on this
>> server
>>
>>
>>
>> Hi Everyone,
>>
>>
>>
>> I'm very very new to XYMON, as a matter of fact, I just installed
>> it 15 minutes ago. I thought I was cruising along quite nicely
>> until I tested it. This is what I received:
>>
>> *Not Found*
>>
>> The requested URL /xymon was not found on this server.
>>
>>
>> ---------------------------------------------------------------------
>> ---
>>
>> /Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80/
>>
>>
>>
>> Xymon is running, that I can confirm:
>>
>>
>>
>> [xymon at lsypf01a ~]$ ./server/xymon.sh status
>>
>> Xymon (xymonlaunch) running with PID 4826
>>
>> [xymon at lsypf01a ~]$
>>
>>
>>
>> Here is my xymon-apache.conf, I made changes from what I've read
>> in the older subscription messages:
>>
>>
>>
>> Alias /xymon/ "/home/xymon/server/www/"
>>
>> <Directory "/home/xymon/server/www">
>>
>> Options Indexes FollowSymLinks Includes MultiViews
>>
>> Require all granted
>>
>> </Directory>
>>
>>
>>
>> ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
>>
>> <Directory "/home/xymon/cgi-bin">
>>
>> AllowOverride None
>>
>> Options ExecCGI Includes
>>
>> Require all granted
>>
>> </Directory>
>>
>>
>>
>> ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
>>
>> <Directory "/home/xymon/cgi-secure">
>>
>> AllowOverride None
>>
>> Options ExecCGI Includes
>>
>> Require all granted
>>
>>
>>
>> Various logs in /var/log/xymon:
>>
>>
>>
>> Xymonlaunch.log:
>>
>> 2013-12-11 13:24:00 xymonlaunch starting
>>
>> 2013-12-11 13:24:00 Loading tasklist configuration from
>> /home/xymon/server/etc/tasks.cfg
>>
>> 2013-12-11 13:24:00 Cannot open directory
>> /home/xymon/server/etc/tasks.d
>>
>> 2013-12-11 13:24:00 Loading hostnames
>>
>> 2013-12-11 13:24:00 Loading saved state
>>
>> 2013-12-11 13:24:00 Setting up network listener on 0.0.0.0:1984
>> <http://0.0.0.0:1984>
>>
>> 2013-12-11 13:24:00 Setting up signal handlers
>>
>> 2013-12-11 13:24:00 Setting up xymond channels
>>
>> 2013-12-11 13:24:00 Setting up logfiles
>>
>>
>>
>> Rrd-data.log:
>>
>> 2013-12-11 13:34:13 Peer at 0.0.0.0:0 <http://0.0.0.0:0> failed:
>> Broken pipe
>>
>> 2013-12-11 13:34:13 Peer not up, flushing message queue
>>
>> 2013-12-11 13:34:13 exec() failed for child command xymond_rrd: No
>> such file or directory
>>
>> 2013-12-11 13:34:13 Child process 5357 died: Exit status 1
>>
>>
>>
>> *David Diep*
>>
>>
>>
>> * *
>>
>> Look out for those in need this winter. When the temperature or
>> wind chill is 32°F or below, the District issues a Hypothermia
>> Alert. For assistance during an Alert, call the Shelter Hotline
>> <http://dhs.dc.gov/page/hypothermia-alert-plan>at *1-800-535-7252
>> <tel:1-800-535-7252>* or *311*.
>>
>>
>>
>>
>> _______________________________________________
>> Xymon mailing list
>> Xymon at xymon.com<mailto:Xymon at xymon.com> <mailto:Xymon at xymon.com>
>> http://lists.xymon.com/mailman/listinfo/xymon
>>
>>
>>
>>
>> _______________________________________________
>> Xymon mailing list
>> Xymon at xymon.com<mailto:Xymon at xymon.com>
>> http://lists.xymon.com/mailman/listinfo/xymon
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com<mailto:Xymon at xymon.com>
> http://lists.xymon.com/mailman/listinfo/xymon
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20131212/ebefea4a/attachment.html>
More information about the Xymon
mailing list