[hobbit] Building server on OSX 10.5.5

[Lee J. Imber]

Thanks for the replies.

John got me going and provided some very valuable information for  
10.5.x hobbit server installs.

Also I ran into a chgrp error during the gmake install, you need to  
tweak hobbitd/Makefile.

Hope this helps others,

Cheers,

Lee

On Sep 25, 2008, at 3:12 PM, John Turner wrote:

> Yes. With 10.5 the nireport command is replaced with dscl. You will  
> want to replace the lines 186 and 196 as shown below.
>
> old ->  USERDATA="`nireport / /users name home | grep $BBUSER`"
> new -> USERDATA="`dscl . -list /Users  | grep $BBUSER`"
>
>
> old->   HOMEDIR="`echo $USERDATA | awk '{print $2}'`"
> new-> HOMEDIR="`dscl . -read /Users/$BBUSER | grep HomeDirectory |  
> awk '{print $2}'`"
>
> John
>
> On Sep 25, 2008, at 3:05 PM, Lee J. Imber wrote:
>
>> Thanks John, That get me further along but I then run into the next  
>> issue.
>>
>> sh-3.2$ id
>> uid=1000(lee) gid=1000(lee) groups=1000(lee),1004(cvs), 
>> 101(com.apple.access_screensharing),80(admin)
>> sh-3.2$ MAKE=gmake ./configure.server --rrdinclude /opt/local/ 
>> include --rrdlib /opt/local/lib --pcreinclude /opt/local/include -- 
>> pcrelib /opt/local/lib
>>
>> Configuration script for Hobbit
>>
>> This script asks a few questions and builds a Makefile to compile  
>> Hobbit
>>
>> Checking your make-utility
>> Checking pre-requisites for building Hobbit
>>
>> Checking for fping ...
>> Hobbit has a built-in ping utility (hobbitping)
>> However, it is not yet fully stable and therefore it
>> may be best to use the external fping utility instead.
>> I could not find fping on your system
>> Do you want to use hobbitping [Y/n] ?
>> y
>> OK, I will use hobbitping.
>>
>>
>> Checking for RRDtool ...
>> test-rrd.c: In function 'main':
>> test-rrd.c:30: error: too few arguments to function 'rrd_graph'
>> gmake: *** [test-compile] Error 1
>> Not RRDtool 1.0.x, checking for 1.2.x
>> Found RRDtool include files in /opt/local/include
>> Found RRDtool libraries in /opt/local/lib
>>
>>
>> Checking for PCRE ...
>> Found PCRE include files in /opt/local/include
>> Found PCRE libraries in /opt/local/lib
>>
>>
>> Checking for OpenSSL ...
>> OpenSSL include- or library-files not found.
>> Although you can use Hobbit and bbgen without OpenSSL, you will not
>> be able to run network tests of SSL-enabled services, e.g. https.
>> So installing OpenSSL is recommended.
>> OpenSSL can be found at http://www.openssl.org/
>>
>> If you have OpenSSL installed, use the "--sslinclude DIR" and "-- 
>> ssllib DIR"
>> options to configure to specify where they are.
>>
>> Continuing with SSL support disabled.
>>
>>
>> Checking for LDAP ...
>> (Open)LDAP include- or library-files not found.
>> If you want to perform detailed LDAP tests (queries), you need to
>> install LDAP an LDAP client library that bbgen can use.
>> OpenLDAP can be found at http://www.openldap.org/
>>
>> If you have OpenLDAP installed, use the "--ldapinclude DIR" and "-- 
>> ldaplib DIR"
>> options to configure to specify where they are.
>>
>> Continuing with LDAP support disabled.
>>
>>
>> Checking for Large File Support ...
>> Large File Support OK
>>
>>
>> Setting up for a Hobbit server
>>
>>
>> What userid will be running Hobbit [hobbit] ?
>> lee
>> ./configure.server: line 186: nireport: command not found
>> FAILURE: The user lee does not exist. Create user and try again.
>> sh-3.2$
>>
>>
>> Any ideas?
>>
>> Thanks,
>>
>> Lee
>>
>> On Sep 25, 2008, at 2:47 PM, John Turner wrote:
>>
>>> I just did this yesterday using this command...
>>>
>>> ./configure.server --rrdinclude /opt/local/include --rrdlib /opt/ 
>>> local/lib --pcreinclude /opt/local/include --pcrelib /opt/local/ 
>>> lib --sslinclude /opt/local/include --ssllib /opt/local/lib -- 
>>> ldapinclude /opt/local/include --ldaplib /opt/local/lib
>>>
>>> I checked and my rrdtool (installed via MacPorts yesterday) was  
>>> 1.3.3
>>>
>>> configure output edited as follows....
>>>
>>>> Checking for RRDtool ...
>>>> test-rrd.c: In function 'main':
>>>> test-rrd.c:30: error: too few arguments to function 'rrd_graph'
>>>> make: *** [test-compile] Error 1
>>>> Not RRDtool 1.0.x, checking for 1.2.x
>>>> Found RRDtool include files in /opt/local/include
>>>> Found RRDtool libraries in /opt/local/lib
>>>
>>>
>>> I see your mistake "--rrdinclude" needs to be /opt/local/include  
>>> not /opt/local/bin.
>>>
>>>
>>> John Turner
>>>
>>> On Sep 25, 2008, at 2:35 PM, Lee J. Imber wrote:
>>>
>>>> I am trying to build 4.2.0 server on OSX 10.5.5.
>>>>
>>>>
>>>> sh-3.2$ find /opt/local/ -name rrdtool
>>>> /opt/local//bin/rrdtool
>>>> /opt/local//lib/rrdtool
>>>> /opt/local//share/rrdtool
>>>> /opt/local//var/macports/distfiles/rrdtool
>>>> /opt/local//var/macports/receipts/rrdtool
>>>> /opt/local//var/macports/software/rrdtool
>>>> /opt/local//var/macports/software/rrdtool/1.3.2_0/opt/local/bin/ 
>>>> rrdtool
>>>> /opt/local//var/macports/software/rrdtool/1.3.2_0/opt/local/lib/ 
>>>> rrdtool
>>>> /opt/local//var/macports/software/rrdtool/1.3.2_0/opt/local/share/ 
>>>> rrdtool
>>>> /opt/local//var/macports/sources/rsync.macports.org/release/ports/ 
>>>> net/rrdtool
>>>>
>>>> sh-3.2$ MAKE=gmake ./configure.server --rrdinclude /opt/local/bin  
>>>> --rrdlib /opt/local/lib
>>>>
>>>> Configuration script for Hobbit
>>>>
>>>> This script asks a few questions and builds a Makefile to compile  
>>>> Hobbit
>>>>
>>>> Checking your make-utility
>>>> Checking pre-requisites for building Hobbit
>>>>
>>>> Checking for fping ...
>>>> Hobbit has a built-in ping utility (hobbitping)
>>>> However, it is not yet fully stable and therefore it
>>>> may be best to use the external fping utility instead.
>>>> I could not find fping on your system
>>>> Do you want to use hobbitping [Y/n] ?
>>>> y
>>>> OK, I will use hobbitping.
>>>>
>>>>
>>>> Checking for RRDtool ...
>>>> test-rrd.c:3:17: error: rrd.h: No such file or directory
>>>> test-rrd.c: In function 'main':
>>>> test-rrd.c:26: warning: implicit declaration of function  
>>>> 'rrd_clear_error'
>>>> test-rrd.c:30: warning: implicit declaration of function  
>>>> 'rrd_graph'
>>>> gmake: *** [test-compile] Error 1
>>>> Not RRDtool 1.0.x, checking for 1.2.x
>>>> test-rrd.c:3:17: error: rrd.h: No such file or directory
>>>> test-rrd.c: In function 'main':
>>>> test-rrd.c:26: warning: implicit declaration of function  
>>>> 'rrd_clear_error'
>>>> test-rrd.c:28: warning: implicit declaration of function  
>>>> 'rrd_graph'
>>>> gmake: *** [test-compile] Error 1
>>>> ERROR: RRDtool include files found in /opt/local/bin, but compile  
>>>> fails.
>>>> sh-3.2$
>>>>
>>>>
>>>> AFAIK BSD tools are installed.
>>>>
>>>> Anyone have success?
>>>>
>>>> Thanks,
>>>>
>>>> Lee
>>>>
>>>>
>>>> To unsubscribe from the hobbit list, send an e-mail to
>>>> hobbit-unsubscribe at hswn.dk
>>>>
>>>>
>>>
>