[hobbit] hobbit client

[Galen Johnson]

Unless you have alert on yellow enabled, it won't alert until disk reaches 95% unless I'm missing something.

=G=

From: Joshua Krause [mailto:forums at triadbiz.rr.com]
Sent: Monday, May 05, 2008 11:29 AM
To: hobbit at hswn.dk
Subject: [hobbit] hobbit client

I've got a group of servers running the hobbit client and my disk is not being alerted on.  Here is a sample from the disk page in hobbit:


Filesystem            Size  Used Avail Use% Mounted on

/dev/sda2             7.9G  6.8G  749M  91% /

/dev/sda1              99M   34M   60M  37% /boot

/dev/sda3              24G  429M   22G   2% /export/home


Status unchanged in 58 days,22 hours, 27 minutes
Status message received from 172.31.129.185
Client data<http://ops1/monitor-cgi/bb-hostsvc.sh?CLIENT=gsonc-spg-vod-t16-4> available


[cid:image001.png at 01C8AEA4.20A430C0]<http://ops1/monitor-cgi/hobbitgraph.sh?host=gsonc-spg-vod-t16-4&service=disk&graph_width=576&graph_height=120&disp=gsonc%2dspg%2dvod%2dt16%2d4&nostale&color=green&action=menu>



And here is what I have in the /opt/hobbit/server/etc/hobbit-clients.cfg file:

HOST=%gsonc-spg-ops-1
        LOAD    9.0 15.0
        PROC    snmpd
        PROC    snmptt
        PROC    sec.pl
        PROC    snmptrapd
        PROC    mysqld

HOST=%gsonc-spg-ops-2
        PROC    radiusd
        PROC    mysqld

HOST=%gsonc-spg-ops-3
        PROC    syslog-ng
        PROC    mysqld

HOST=%gsonc-spg-omea-1
        PROC    cron
        LOAD    7.0 10.0

HOST=%gsonc-spg-sunbox
        LOAD    11.5 12.5
        MEMSWAP 85 95

HOST=%gsonc-spg-dncs
        FILE    /export/home/dncs/mystro/bfs/Compass_OOB/rta.grp.z SIZE>1200 TRACK=rta
        LOAD    10.0 15.0
        DISK    / 95 98
        DISK    /cdrom IGNORE

HOST=%gsonc-spg-mas*
        FILE /usr/local/mystro/conf/rtareports_headendinfo.properties MTIME=1128514608 TRACK=rta-reports
        MEMPHYS 100 101
        MEMSWAP 75 90
        MEMACT  97 98

HOST=%gsonc-spg-rtc*
        LOAD    17.0 22.0

HOST=%gsonc-spg-vod-t*
        LOAD    17.0 22.0

HOST=%gsonc-spg-vodgs*
        LOAD    17.0 22.0
        PROC    cron

DEFAULT
        # These are the built-in defaults.
        UP      1h
        LOAD    5.0 10.0
        DISK    * 90 95
        MEMPHYS 100 101
        MEMSWAP 75 90
        MEMACT  90 97


I highlighted in bold the group that deals with one of the servers in question.  I should use the DEFAULT group for everything except load.  And load is working right and the uptime reports back good also.  So it is showing the alerting on uptime via the DEFAULTS and it is alerting on LOAD with the exception.  So why is DISK not alerting out or even changing colors.  I have tried these to variations but they didn't work either:

HOST=%gsonc-spg-vod-t*
        LOAD    17.0 22.0
        DISK      / 90 95

HOST=%gsonc-spg-vod-t*
        LOAD    17.0 22.0
        DISK      * 90 95


And neither of those worked.  Any help greatly appreciated.

Thanks,

Josh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20080505/70f01b16/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 22125 bytes
Desc: image001.png
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20080505/70f01b16/attachment.png>