[hobbit] rrd-data.log

[Beau Olivier]

Hi,

yes, this is interesting, and i think it points out a new problem, 802.1q on nics :

eth1      Link encap:Ethernet  HWaddr 00:0D:9D:4E:11:9C  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2798842 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8950695 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:217776970 (207.6 MiB)  TX bytes:4275403340 (3.9 GiB)
          Interrupt:201 

eth1.9    Link encap:Ethernet  HWaddr 00:0D:9D:4E:11:9C  
          inet addr:192.168.250.33  Bcast:192.168.250.0  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2226941 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3441485 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:520111630 (496.0 MiB)  TX bytes:410431496 (391.4 MiB)

eth1.15   Link encap:Ethernet  HWaddr 00:0D:9D:4E:11:9C  
          inet addr:10.11.99.99  Bcast:10.11.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1909363 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7253215 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:110322292 (105.2 MiB)  TX bytes:1702401944 (1.5 GiB)


olivier



-----Message d'origine-----
De : Henrik Stoerner [mailto:henrik at hswn.dk]
Envoyé : mercredi 2 août 2006 12:59
À : hobbit at hswn.dk
Objet : Re: [hobbit] rrd-data.log


On Wed, Aug 02, 2006 at 12:23:53PM +0200, Beau Olivier wrote:
>  
> I'm having "Internal error: Duplicate match ignored" in my rrd-data.log,
> what could cause this ?

It means your netstat data doesn't look like what Hobbit expects.
Basically that it found two or more values for the same piece of data.

The best way of identifying which data causes this is probably to
run two things at the same time:

1) login as the hobbit user, and run
      bbcmd hobbitd_channel --channel=data tee /tmp/data.log

2) Run "tail -f" on the rrd-data.log file.

When you see that error message in the rrd-data.log file, terminate
the first command. You should then have the "guilty" data at the end of
the /tmp/data.log file.

I'd obviously be interested to see what it looks like.


Regards,
Henrik


To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk