[hobbit] Re: netstat -s output for hpux 11.11 (11i)

[lars ebeling]

It is very hard to get bytes out of HP-UX. Is this an answer for you?

Lars

# lanadmin -g mibstats 0

                      LAN INTERFACE STATUS DISPLAY
                       Sun, Apr 23,2006  15:51:14

PPA Number                      = 0
Description                     = lan0 Hewlett-Packard LAN Interface Hw Rev 
0
Type (value)                    = ethernet-csmacd(6)
MTU Size                        = 1500
Speed                           = 10000000
Station Address                 = 0x80009a35c3b
Administration Status (value)   = up(1)
Operation Status (value)        = up(1)
Last Change                     = 300198077
Inbound Octets                  = 3111235429
Inbound Unicast Packets         = 16596539
Inbound Non-Unicast Packets     = 2554519
Inbound Discards                = 75971167
Inbound Errors                  = 27
Inbound Unknown Protocols       = 58
Outbound Octets                 = 3892111463
Outbound Unicast Packets        = 118413162
Outbound Non-Unicast Packets    = 956287
Outbound Discards               = 21849
Outbound Errors                 = 0
Outbound Queue Length           = 0
Specific                        = 655367

Ethernet-like Statistics Group

Index                           = 1
Alignment Errors                = 0
FCS Errors                      = 0
Single Collision Frames         = 375927
Multiple Collision Frames       = 156248
Deferred Transmissions          = 27291198
Late Collisions                 = 0
Excessive Collisions            = 0
Internal MAC Transmit Errors    = 0
Carrier Sense Errors            = 324
Frames Too Long                 = 0
Internal MAC Receive Errors     = 0

----- Original Message ----- 
From: "Henrik Stoerner" <henrik at hswn.dk>
To: <hobbit at hswn.dk>
Sent: Sunday, April 23, 2006 2:16 PM
Subject: [hobbit] Re: netstat -s output for hpux 11.11 (11i)


> On Wed, Apr 05, 2006 at 07:22:00PM +0200, thomas.seglard.enata at cnp.fr 
> wrote:
>> $ uname -r
>> B.11.11
>> $ netstat -s
>> tcp:
>>         90934926 packets sent
>
> I already have the "netstat -s" output, but is statistics for TCP/IP.
> What I'm after right now is statistics about the physical network
> interfaces - how many bytes have been received and transmitted through
> the Ethernet network-card.
>
>>From the public man-pages, it seems this might be the "netstat -in"
> command. What output does that give on HP-UX ?
>
> (I'd like the same info for Darwin, but I don't know what commands you
> must use. If it's like the *BSD systems, perhaps "netstat -i -b -n" ?)
>
>
> Regards,
> Henrik
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>