what about the 'trends' column?
On 8/31/06, Gary B. <gmbfly98 (at) gmail.com> wrote:
> > did you wait enough cycles? could you check if there's RRD actually
> > generated for the host under /var/lib/hobbit/rrd/ ?
>
> Yes, I've waited enough cycles, but the graph still isn't showing up.
> Meanwhile, several other changes I've made have shown up.
>
> Yes, the RRD files have actually been generated. They just don't want
> to show up on the "ports" page for this host... It's time for lunch,
> so I'll check when I get back - maybe it'll work if I don't stare at
> it, like that pot of boiling water ;-)
>
> > On 8/31/06, Gary B. < gmbfly98 (at) gmail.com> wrote:
> > > > oh, you are using it under a wild-card (or multi-host) HOST= section
> > thus
> > > > you want to limit the test to apply to that HOST alone. makes sense
> > then.
> > > > I think the missing () is somewhat important too. If I recall
correctly,
> > I
> > > > didn't have much sucess until I inserted () myself.
> > >
> > > Hmm. The actual tests seem to be working correctly, but the RRD graph
> > > just isn't showing up...
> > >
> > > > On 8/31/06, Gary B. < gmbfly98 (at) gmail.com> wrote:
> > > > >
> > > > > I don't use HOST= in my working PORT tracking. I agree with Greg
on
> > doing
> > > > it
> > > > > via the RegExp itself.
> > > >
> > > > The problem with that is, it will perform the PORT test on all of
the
> > > > machines under the HOST= section the test is under. I don't want
> > > > this, as only one of the machines actually has the ports running. I
> > > > haven't had a problem using HOST= in this manner before, and it's
> > > > described in the "rules to select hosts" section in the manpage for
> > > > hobbit-clients.cfg
> > > >
> > > > > minor thing: not so sure TRACK= can take all numeric or not.
> > > > > I believe your RegExp needs (). Mine goes like below. I have PORT
> > column
> > > > > show and alerts generated, plus RRD graph for counting of
TIME_WAIT
> > > > > connections to
> > > > > PORT LOCAL=%([.:]3306)$ STATE=TIME_WAIT MIN=0 MAX=10000
COL=yellow
> > > > > TRACK=db_TimeWait TEXT=db_TimeWait
> > > >
> > > > I was wondering that myself. I'll try changing to TRACK= to be
> > > > character-based and see if that helps.
> > > >
> > > > To unsubscribe from the hobbit list, send an e-mail to
> > > > hobbit-unsubscribe (at) hswn.dk
> > > >
> > > >
> > > >
> > > >
> > >
> > > To unsubscribe from the hobbit list, send an e-mail to
> > > hobbit-unsubscribe (at) hswn.dk
> > >
> > >
> > >
> >
> >
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>
>
>