[Xymon] Windows PS xymonclient

Wed Feb 20 20:32:42 CET 2019

The xymond test on the server wasn’t complaining about those machines. It is complaining about a Cisco ASA we have in devmon, so I’m upping those settings, and will see what happens there.

Just got 2.28 version. Will try it.

From: Timothy Williams <tlwilliams4 at vcu.edu>
Sent: Wednesday, February 20, 2019 1:09 PM
To: Root, Paul T <Paul.Root at CenturyLink.com>
Cc: SebA <spah at syntec.co.uk>; xymon at xymon.com
Subject: Re: [Xymon] Windows PS xymonclient

Another issue I had with missing data categories was the size of the data file exceeding the buffer size set in Xymon. File got truncated leading to missing data to analyse. Check the size of MAXMSG_STATUS, MAXMSG_CLIENT and MAXMSG_DATA.
Also, on one server, a user had installed a service with square brackets as part of the name [ xx ], which Xymon interpreted as a section, then would not read the rest of the data file. Got that service name changed..

Tim Williams

On Wed, Feb 20, 2019 at 1:55 PM Root, Paul T <Paul.Root at centurylink.com<mailto:Paul.Root at centurylink.com>> wrote:
Nope, 2.34. That was what was on github, or where ever it was that I got it.

I’m not a developer, and don’t really get how to use git.  I poked and prodded until I got the file.

I’ll try to find 2.28 and try it on those 2 machines.

From: SebA <spah at syntec.co.uk<mailto:spah at syntec.co.uk>>
Sent: Wednesday, February 20, 2019 12:10 PM
To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>
Cc: Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>>; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Windows PS xymonclient

Hi Paul,

Do you mean v2.37 (that's the latest)?  If so, I had the same issue on one of our servers.  Downgrading to v2.28 fixed it, restarting the new version fixed it multiple times for just the 1st cycle, I got it working in a powershell admin prompt (running for at least an hour), then closed it and restarted the service on the new version, and it's been fine since then!  I'm not touching it now!  ;-)

Clutching at straws a little bit, but I wonder if it might be related to not much memory being available.  On the first run, it's using less memory so it works...  (We have a process hogging almost all the RAM on that server.)

BTW, the empty sections I was getting are:

[netstat]
[ports]
[ipconfig]
[route]

Kind regards,

SebA

On Wed, 20 Feb 2019 at 18:06, Root, Paul T <Paul.Root at centurylink.com<mailto:Paul.Root at centurylink.com>> wrote:
Old version was 2.19, not 2.18.

I put it back in on one of the machines and ports and who are back to normal.

From: Xymon <xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>> On Behalf Of Root, Paul T
Sent: Wednesday, February 20, 2019 12:03 PM
To: 'Kris Springer' <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>>; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Windows PS xymonclient

Thanks Kris,
                No, these are all 2008R2 servers.   Both ports and who worked with the 2.18 version, that I was using.

Paul.

From: Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>>
Sent: Wednesday, February 20, 2019 12:01 PM
To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Windows PS xymonclient

Not sure if it's your issue or not, but I've found that 'who' is blank for Windows Home editions.  Only Pro editions or Servers shows me 'who' output.  Also, Windows Home editions don't have RDP, so it wouldn't be there anyway.  Also, I've seen these sorts of issues on my servers before, and a reboot usually fixes it.

Kris Springer

On 2/20/19 10:47 AM, Root, Paul T wrote:
So I only have 6 windows servers that I’m concerned with in my xymon installation.

Today, I decided to upgrade the service. So I downloaded the v2.34 ps1 file. And I copied the file in place and restarted via the services window.

This worked just fine on 4 machines.   But on 2 machines, I get the ports test gone red because I’m looking for RDP, but I’m getting no output at all.  Going into who, it is also blank.
Processes and SVCS are both fine.

So next I started the powershell as an administrator, and did the ‘Set-ExecutablePolicy RemoteSigned” and then did a .\xymonclient.ps1 install. Then a stop and start.

Still stays the same blank page.

Does anyone have any ideas?

Paul Root
Lead Operations Engineer    - IT Managed Services
390 Commerce Dr
Woodbury, Mn 55125
651-312-5207  paul.root at centurylink.com<mailto:paul.root at centurylink.com>

This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.

_______________________________________________

Xymon mailing list

Xymon at xymon.com<mailto:Xymon at xymon.com>

http://lists.xymon.com/mailman/listinfo/xymon

This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
_______________________________________________
Xymon mailing list
Xymon at xymon.com<mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
_______________________________________________
Xymon mailing list
Xymon at xymon.com<mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20190220/8586ee29/attachment-0001.html>