[Xymon] [External] Re: PSclient sending from intranet

Thu Nov 8 10:25:42 CET 2018

Hi Kris

Yes, I have it working. As you say, the URL needs to include the full path to xymoncgimsg.cgi.

All xymoncgimsg.cgi does as far as I can tell is relay the message(s) received over HTTPS via TCP to localhost port 1984 (which is what the man page says as well). So you need that listening (which by default it will be).

I don’t recall making any other config changes to make this work (aside from Apache etc to sort out the authentication).

I suspect the time out is waiting for the response – when you submit data to Xymon, you normally get the client local config back from the server. This comes back via the HTTPS response. There is a timeout setting – sorry I forgot to document it in the table in the Word doc – serverHttpTimeoutMs – which defaults to 100000 milliseconds – i.e. 100 seconds. This is the time it waits for the response from the server. 100 seconds is pretty generous unless you’re traversing particularly slow VPNs or saturated connections. You can override this in the xymonclient_config.xml file.

I’m assuming you’re getting this message:

    "  Connecting to $($url), body length $($body.Length), timeout $($script:XymonSettings.serverHttpTimeoutMs)ms"

And then this one (with a timeout exception):

        "  Exception connecting to $($url):`n$($_)"

And not either of these:

        "  FAILED, HTTP response code: $($response.StatusCode) ($statusCode)"
or
        "  Received $($output.Length) bytes from server"

Zak
From: Xymon <xymon-bounces at xymon.com> On Behalf Of kspringer at innovateteam.com
Sent: Thursday, 8 November 2018 08:51
To: Xymon MailingList <xymon at xymon.com>
Subject: [External] Re: [Xymon] PSclient sending from intranet

Anyone have xymoncgimsg.cgi functioning on their server and successfully receiving PSclient data over HTTPS?  The documentation for this is vague and doesn't specify how to make it work. Any specifics would be greatly appreciated.

Thanks,
Kris Springer

-----Original Message-----
From: Timothy Williams <tlwilliams4 at vcu.edu<mailto:tlwilliams4 at vcu.edu>>
To: kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Sent: Tue, 06 Nov 2018 2:22 PM
Subject: Re: [Xymon] PSclient sending from intranet
Alas, I am unable to help further, as my InfoSec allows port 1984, and not 80 or 443 to Xymon, so I don't have http running.

Tim

On Tue, Nov 6, 2018 at 3:29 PM Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>> wrote:
I've configured one of my PSclients to test this HTTPS functionality, and it indeed does try to send data over port 443.  But the client logs say that my Xymon server is timing out.  Is there a specific server url path that I need to be using?  The documentation doesn't give any example.

Kris Springer

On 11/6/18 7:54 AM, Timothy Williams wrote:
The Powershell client can connect to the Xymon server using TCP port 1984 as default, but can also connect using HTTP or HTTPS with/without user/password. You likely have port 80 or 443 open. Here are Word doc details:

HTTP is an alternate method. It can be used if you have xymoncgimsg.cgi running on the web server on your Xymon server – see https://www.xymon.com/help/manpages/man8/xymoncgimsg.cgi.8.html<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.xymon.com_help_manpages_man8_xymoncgimsg.cgi.8.html&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=-OwMT0n637myRsiGrh2Ey_FyOjBckX9cnzeXB9ID_dw&s=nwg-TdqZw8dbasxkybIMrt8HKpuV-U4Z2HpC5Rbr1BM&e=>. The web server running the CGI can be configured for SSL (i.e. HTTPS) and / or authentication – XymonPSClient supports basic authentication and SSL. If you require authentication, the <serverHttpUsername> and <serverHttpPassword> elements should be configured.
If you are using HTTP and transmitting over unsecure networks (e.g.  the internet), it is strongly recommended to enable SSL, authentication and disallow HTTP connections.

ServerHttpPassword encryption
If <serverHttpPassword> is set, the Xymon client will encrypt the password if it is not encrypted and remove the plain text password from the configuration file, overwriting with the encrypted password. The Xymon client will prefix the encrypted password with ‘{SecureString}’, so it is easy to tell if the client has attempted to encrypt the password or not.
This is done using the .NET SecureString functions, which means that the encryption is unique to the server and user. This means that once the password has been encrypted, you cannot use the same xymonclient_config.xml on another server. It also means that if you have been testing by running XymonPSClient from a command prompt, and this encrypts the password, when you run XymonPSClient as a service it will not be able to decrypt the password unless the service is running as the same user.
In both scenarios, replacing the encrypted password with the plain text password and re-starting Xymon will cause the password to be re-encypted.

Tim Williams

On Tue, Nov 6, 2018 at 9:37 AM Rolf Schrittenlocher <schritte at ub.uni-frankfurt.de<mailto:schritte at ub.uni-frankfurt.de>> wrote:
any possibility to send something from intranet to the world outside?
creating webpage, send by sftp or scp? This could be done by cron and
xymon could analyze this data then.
> Anyone have an idea about how to collect client server stats using the
> Powershell client on machines that are on an intranet that blocks port
> 1984, and send it out to our external xymon server located in a
> different part of the country?  The intranet network doesn't want to
> open any additional ports to allow the traffic out.
>

--
Mit freundlichen Grüßen
Rolf Schrittenlocher

Lokales Bibliothekssystem Frankfurt
Bockenheimer Landstr. 134-138, 60325 Frankfurt
Tel LBS: (49) 69 - 798 28830
Tel persönlich: (49) 69 - 798 28908
LBS: lbs at ub.uni-frankfurt.de<mailto:lbs at ub.uni-frankfurt.de>
Persönlich: schritte at ub.uni-frankfurt.de<mailto:schritte at ub.uni-frankfurt.de>

_______________________________________________
Xymon mailing list
Xymon at xymon.com<mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=-OwMT0n637myRsiGrh2Ey_FyOjBckX9cnzeXB9ID_dw&s=F_2sRqz669yemQ4GbrwkTlh6D0HtrNX1wqu7RvAN1WE&e=>

________________________________

This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. Your privacy is important to us. Accenture uses your personal data only in compliance with data protection laws. For further information on how Accenture processes your personal data, please see our privacy statement at https://www.accenture.com/us-en/privacy-policy.
______________________________________________________________________________________

www.accenture.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20181108/5d5f8177/attachment.html>