[Xymon] help with xymon client configuration

[Jeremy Laidman]

The only configuration required on the Xymon client is the IP address of
the Xymon server.  Typically, this is configured in the file
xymonclient.cfg, where you can set XYMSRV to the correct IP address.

Then you start the client running, perhaps by an init script.  The master
Xymon client process is xymonlaunch.  If this isn't running, then you won't
get any local details (cpu, memory, etc).

There are logfiles (on my system, in /var/log/xymon/) that might help
identify any problems.

J



On 7 January 2013 06:32, Ciprian Parfon <ciprian.parfon at gmail.com> wrote:

> Hello
>
> I have just installed a fresh xymon server with the latest xymon version.
> I have also managed to install the client on some external host. Both are
> running fine and the monitoring page is showing correctly.  However I
> haven't managed to find how can I configure multiple checks on the client
> side, as for the single host I have added all I have is "conn", "info" and
> "trends" columns. On the host which is running the xymon client I have the
> following files which you can see below:
>
> zeratul etc # pwd
> /home/xymon/client/etc
> zeratul etc # ls -la
> total 40
> drwxr-xr-x 2 xymon root  4096 2013-01-06 19:31 .
> drwxr-xr-x 8 xymon root  4096 2013-01-06 16:58 ..
> -rw-r--r-- 1 xymon root   975 2013-01-06 16:58 clientlaunch.cfg
> -rw-r--r-- 1 xymon root 20959 2013-01-06 16:58 localclient.cfg
> -rw-r--r-- 1 xymon root  1850 2013-01-06 16:58 xymonclient.cfg
>
> I would like to enable at least cpu, load, memory, disk etc ...
>
> Where can I make this available?
>
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20130107/4e7adc78/attachment.html>