[Xymon] 404 Not Found URL/xymon was not found on this server
    Diep, David (OCTO-Contractor) 
    David.Diep at dc.gov
       
    Thu Dec 12 15:07:07 CET 2013
    
    
  
Here you go:
[root at lsypf01a cgi-bin]# namei -mx /home/xymon
f: /home/xymon
Dr-xr-xr-x /
drwxr-xr-x home
drwx--x--x xymon
[root at lsypf01a cgi-bin]# namei -mx /home/xymon/cgi-bin
f: /home/xymon/cgi-bin
Dr-xr-xr-x /
drwxr-xr-x home
drwx--x--x xymon
drwxr-xr-x cgi-bin
[root at lsypf01a cgi-bin]# ^C
[root at lsypf01a cgi-bin]# namei -mx /home/xymon/cgi-secure
f: /home/xymon/cgi-secure
Dr-xr-xr-x /
drwxr-xr-x home
drwx--x--x xymon
drwxr-xr-x cgi-secure
[root at lsypf01a cgi-bin]# namei -mx /home/xymon/client
f: /home/xymon/client
Dr-xr-xr-x /
drwxr-xr-x home
drwx--x--x xymon
drwxr-xr-x client
[root at lsypf01a cgi-bin]# namei -mx /home/xymon/data
f: /home/xymon/data
Dr-xr-xr-x /
drwxr-xr-x home
drwx--x--x xymon
drwxr-xr-x data
[root at lsypf01a cgi-bin]# namei -mx /home/xymon/server
f: /home/xymon/server
Dr-xr-xr-x /
drwxr-xr-x home
drwx--x--x xymon
drwxr-xr-x server
David Diep | IBM Z Series Network Architect | Office of the Chief Technology Officer
Integrated Platform Services | 200 I Steet SE | Washington DC, 20003
Phone: 202.727.1475 | Mobile Phone: 202.727.3976 | Email:David.Diep at dc.gov<mailto:David.Diep at dc.gov>
Website: www.octo.dc.gov<http://www.octo.dc.gov/> | Telework day: Thursday
From: Josh Luthman [mailto:josh at imaginenetworksllc.com]
Sent: Thursday, December 12, 2013 8:53 AM
To: Diep, David (OCTO-Contractor)
Cc: cleaver at terabithia.org; Root, Paul T; xymon at xymon.com; Galen Johnson
Subject: RE: [Xymon] 404 Not Found URL/xymon was not found on this server
Namei -mx that directory?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 12, 2013 8:15 AM, "Diep, David (OCTO-Contractor)" <David.Diep at dc.gov<mailto:David.Diep at dc.gov>> wrote:
Good morning guys,
I made a change to xymon-apache.conf, all I did was remove the trailing "/":
From:
Alias /xymon/  "/home/xymon/server/www/"
<Directory "/home/xymon/server/www">
    Options Indexes FollowSymLinks Includes MultiViews
    Require all granted
</Directory>
To:
Alias /xymon  "/home/xymon/server/www"
<Directory "/home/xymon/server/www">
    Options Indexes FollowSymLinks Includes MultiViews
    Require all granted
</Directory>
After the restart, I do see something different:
At the http://ipaddress/xymon
Forbidden
You don't have permission to access /xymon on this server.
________________________________
Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80
In the error_log in /var/httpd:
[Thu Dec 12 07:54:26 2013] [error] [client 10.44.35.35] (13)Permission denied: access to /xymon denied
I went back to xymon_apache.conf and re-added the original allow parameter. This did it!
Alias /xymon  "/home/xymon/server/www"
<Directory "/home/xymon/server/www">
    Options Indexes FollowSymLinks Includes MultiViews
    Order allow,deny
    Allow from all
</Directory>
ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
<Directory "/home/xymon/cgi-bin">
    AllowOverride None
    Options ExecCGI Includes
    Order allow,deny
    Allow from all
</Directory>
ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
<Directory "/home/xymon/cgi-secure">
    AllowOverride None
    Options ExecCGI Includes
    Order allow,deny
    Allow from all
I now can bring up the page... hooray!  Time to continue playing.
Thanks everyone!
Look out for those in need this winter. When the temperature or wind chill is 32°F or below, the District issues a Hypothermia Alert. For assistance during an Alert, call the Shelter Hotline<http://dhs.dc.gov/page/hypothermia-alert-plan> at 1-800-535-7252<tel:1-800-535-7252> or 311.
-----Original Message-----
From: Japheth Cleaver [mailto:cleaver at terabithia.org<mailto:cleaver at terabithia.org>]
Sent: Wednesday, December 11, 2013 3:23 PM
To: Galen Johnson
Cc: Josh Luthman; Root, Paul T; xymon at xymon.com<mailto:xymon at xymon.com>; Diep, David (OCTO-Contractor)
Subject: Re: [Xymon] 404 Not Found URL/xymon was not found on this server
You can also rewrite the existing Alias line to drop the final slash too. eg:
-Alias @XYMONHOSTURL@/  "@INSTALLWWWDIR@/"
+Alias @XYMONHOSTURL@  "@INSTALLWWWDIR@"
For me, that's:
Alias /xymon  "/var/www/xymon"
The RPMs have done that for a while... haven't heard of any issues so far.
-jc
On Wed, December 11, 2013 11:46 am, Galen Johnson wrote:
> To Josh's point, it requires the trailing slash.  If you want to
> ensure that it always redirects to /xymon/, just add a rewrite rule to
> apache's httpd.conf...it may even work in the xymon.conf file:
>
>
> RewriteEngine on
> RewriteRule  ^/xymon$           /xymon/  [R,L]
>
> =G=
>
> On 12/11/2013 02:38 PM, Josh Luthman wrote:
>> Did you see my answer about requesting the wrong directory?
>>
>>
>> Josh Luthman
>> Office: 937-552-2340<tel:937-552-2340>
>> Direct: 937-552-2343<tel:937-552-2343>
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>>
>> On Wed, Dec 11, 2013 at 2:37 PM, Root, Paul T
>> <Paul.Root at centurylink.com <mailto:Paul.Root at centurylink.com<mailto:Paul.Root at centurylink.com%20%3cmailto:Paul.Root at centurylink.com>>> wrote:
>>
>>     Any error messages in apache log files?
>>
>>
>>
>>     *From:*Diep, David (OCTO-Contractor) [mailto:David.Diep at dc.gov<mailto:David.Diep at dc.gov>
>>     <mailto:David.Diep at dc.gov>]
>>     *Sent:* Wednesday, December 11, 2013 1:19 PM
>>     *To:* Root, Paul T; 'xymon at xymon.com<mailto:xymon at xymon.com> <mailto:xymon at xymon.com>'
>>
>>
>>     *Subject:* RE: 404 Not Found URL/xymon was not found on this
>> server
>>
>>
>>
>>     Hi Paul,
>>
>>
>>
>>     I saw that thread and I did go to the config file to make sure...
>>
>>
>>
>>     XYMONSERVERROOT="/home/xymon"                   # Where Xymon is
>>     installed
>>
>>     XYMONSERVERLOGS="/var/log/xymon"                        #
>>     Directory for server logs. The xymon user must have write-access
>> here.
>>
>>     XYMONCLIENTHOME="/home/xymon/client"            # XYMONHOME
>>     directory for the client
>>
>>
>>
>>     XYMONSERVERHOSTNAME="lsypf01a.in.domain"        # The hostname of
>>     your server
>>
>>     XYMONSERVERIP="10.82.10.54"                     # The IP-address
>>     of your server. Use the real one, not 127.0.0.1 .
>>
>>     XYMONSERVEROS="linux"                   # The operating system of
>>     your server. linux,freebsd,solaris,hpux,aix,osf
>>
>>
>>
>>     XYMONSERVERWWWNAME="lsypf01a.in.domain"         # The name used
>>     for this hosts' webserver
>>
>>     XYMONSERVERWWWURL="/xymon"              # The top URL for the
>>     Xymon webpages
>>
>>     XYMONSERVERCGIURL="/xymon-cgi"          # The URL for the Xymon
>>     CGI scripts.
>>
>>     XYMONSERVERSECURECGIURL="/xymon-seccgi" # The URL for the secured
>>     Xymon CGI scripts.
>>
>>
>>
>>     # XYMONNETWORK="foo"                            # The network
>>     location, makes xymonnet test only hosts with NET:foo
>>
>>                                                     # You only need to
>>     set this if you have multiple network test servers with
>>
>>                                                     # a shared
>>     hosts.cfg file.
>>
>>
>>
>>     # Make sure the path includes the directories where you have
>>     fping, mail and (optionally) ntpdate installed,
>>
>>     # as well as the XYMONHOME/bin directory where all of the Xymon
>>     programs reside.
>>
>>     PATH="/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/home/xymon/server/bin"
>>
>>     SHELL="/bin/sh"                                 # Shell to use
>>     when forking programs
>>
>>
>>
>>     # Some systems need extra settings e.g. to locate run-time
>> libraries.
>>
>>     # You can add these extra settings here:
>>
>>
>>
>>
>>
>>     # Default settings for "delayred" and "delayyellow" parameters in
>>     hosts.cfg
>>
>>     DELAYRED=""                     # Format:
>>     status:delay[,status:delay - e.g. "cpu:15,disk:30"
>>
>>     DELAYYELLOW=""                  # Format:
>>     status:delay[,status:delay - e.g. "cpu:15,disk:30"
>>
>>
>>
>>
>>
>>     ##### Normally you do not need to modify anything below this point
>>     #####
>>
>>
>>
>>     # General settings
>>
>>     XYMONDPORT="1984"               # Portnumber where xymond listens
>>
>>     XYMSRV="10.82.10.54"            # IP of a single Xymon server
>>
>>     XYMSERVERS=""                   # IP of multiple Xymon servers. If
>>     used, XYMSRV must be 0.0.0.0
>>
>>     FQDN="TRUE"                     # Use fully-qualified hostnames
>>     internally. Keep it TRUE unless you know better.
>>
>>
>>
>>
>>
>>     I restarted xymon first and then apache... still no luck.
>>
>>
>>
>>     [xymon at lsypf01a ~]$ ./server/xymon.sh restart
>>
>>     Xymon stopped
>>
>>     Xymon started
>>
>>     [root at lsypf01a etc]# service httpd restart
>>
>>     Stopping httpd: [  OK  ]
>>
>>     Starting httpd: [  OK  ]
>>
>>
>>
>>     http://10.82.10.54 is served, but not http://10.82.10.54/xymon
>>
>>
>>
>>     D'oh.
>>
>>
>>
>>     *David Diep**|* IBM Z Series Network Architect | Office of the
>>     Chief Technology Officer
>>
>>     Integrated Platform Services | 200 I Steet SE | Washington DC,
>> 20003**
>>
>>     Phone: 202.727.1475<tel:202.727.1475> <tel:202.727.1475> *| *Mobile Phone:
>>     202.727.3976<tel:202.727.3976> <tel:202.727.3976> *| *Email:_David.Diep at dc.gov<mailto:Email%3A_David.Diep at dc.gov>
>>     <mailto:David.Diep at dc.gov>_
>>
>>     Website:www.octo.dc.gov<http://www.octo.dc.gov> <http://www.octo.dc.gov/> *| **Telework
>>     day: Thursday*
>>
>>
>>
>>     *From:*Root, Paul T [mailto:Paul.Root at CenturyLink.com]<mailto:[mailto:Paul.Root at CenturyLink.com]>
>>     *Sent:* Wednesday, December 11, 2013 2:04 PM
>>     *To:* Diep, David (OCTO-Contractor); 'xymon at xymon.com<mailto:xymon at xymon.com>
>>     <mailto:xymon at xymon.com>'
>>     *Subject:* RE: 404 Not Found URL/xymon was not found on this
>> server
>>
>>
>>
>>     We just had this one.
>>
>>
>>
>>     You see that xymon is listening on 0.0.0.0:1984<http://0.0.0.0:1984>
>>     <http://0.0.0.0:1984>. You need to change you XYMONSERVERIP
>>     environment in xymonserver.cfg to the IP address of the server.
>>     Also set XYMONSERVERHOSTNAME to the hostname and XZYMSRV to the ip
>>     address as well. Then restart xymon.
>>
>>
>>
>>     I'm assuming you did restart apache after you put the
>>     xymon-apache.conf into /etc/httpd/conf.d, right?
>>
>>
>>
>>     *From:*Xymon [mailto:xymon-bounces at xymon.com]<mailto:[mailto:xymon-bounces at xymon.com]> *On Behalf Of *Diep,
>>     David (OCTO-Contractor)
>>     *Sent:* Wednesday, December 11, 2013 12:48 PM
>>     *To:* xymon at xymon.com<mailto:xymon at xymon.com> <mailto:xymon at xymon.com>
>>     *Subject:* [Xymon] 404 Not Found URL/xymon was not found on this
>>     server
>>
>>
>>
>>     Hi Everyone,
>>
>>
>>
>>     I'm very very new to XYMON, as a matter of fact, I just installed
>>     it 15 minutes ago. I thought I was cruising along quite nicely
>>     until I tested it. This is what I received:
>>
>>     *Not Found*
>>
>>     The requested URL /xymon was not found on this server.
>>
>>
>> ---------------------------------------------------------------------
>> ---
>>
>>     /Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80/
>>
>>
>>
>>     Xymon is running, that I can confirm:
>>
>>
>>
>>     [xymon at lsypf01a ~]$ ./server/xymon.sh status
>>
>>     Xymon (xymonlaunch) running with PID 4826
>>
>>     [xymon at lsypf01a ~]$
>>
>>
>>
>>     Here is my xymon-apache.conf, I made changes from what I've read
>>     in the older subscription messages:
>>
>>
>>
>>     Alias /xymon/  "/home/xymon/server/www/"
>>
>>     <Directory "/home/xymon/server/www">
>>
>>         Options Indexes FollowSymLinks Includes MultiViews
>>
>>         Require all granted
>>
>>     </Directory>
>>
>>
>>
>>     ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
>>
>>     <Directory "/home/xymon/cgi-bin">
>>
>>         AllowOverride None
>>
>>         Options ExecCGI Includes
>>
>>         Require all granted
>>
>>     </Directory>
>>
>>
>>
>>     ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
>>
>>     <Directory "/home/xymon/cgi-secure">
>>
>>         AllowOverride None
>>
>>         Options ExecCGI Includes
>>
>>         Require all granted
>>
>>
>>
>>     Various logs in /var/log/xymon:
>>
>>
>>
>>     Xymonlaunch.log:
>>
>>     2013-12-11 13:24:00 xymonlaunch starting
>>
>>     2013-12-11 13:24:00 Loading tasklist configuration from
>>     /home/xymon/server/etc/tasks.cfg
>>
>>     2013-12-11 13:24:00 Cannot open directory
>>     /home/xymon/server/etc/tasks.d
>>
>>     2013-12-11 13:24:00 Loading hostnames
>>
>>     2013-12-11 13:24:00 Loading saved state
>>
>>     2013-12-11 13:24:00 Setting up network listener on 0.0.0.0:1984<http://0.0.0.0:1984>
>>     <http://0.0.0.0:1984>
>>
>>     2013-12-11 13:24:00 Setting up signal handlers
>>
>>     2013-12-11 13:24:00 Setting up xymond channels
>>
>>     2013-12-11 13:24:00 Setting up logfiles
>>
>>
>>
>>     Rrd-data.log:
>>
>>     2013-12-11 13:34:13 Peer at 0.0.0.0:0<http://0.0.0.0:0> <http://0.0.0.0:0> failed:
>>     Broken pipe
>>
>>     2013-12-11 13:34:13 Peer not up, flushing message queue
>>
>>     2013-12-11 13:34:13 exec() failed for child command xymond_rrd: No
>>     such file or directory
>>
>>     2013-12-11 13:34:13 Child process 5357 died: Exit status 1
>>
>>
>>
>>     *David Diep*
>>
>>
>>
>>     * *
>>
>>     Look out for those in need this winter. When the temperature or
>>     wind chill is 32°F or below, the District issues a Hypothermia
>>     Alert. For assistance during an Alert, call the Shelter Hotline
>>     <http://dhs.dc.gov/page/hypothermia-alert-plan>at *1-800-535-7252<tel:1-800-535-7252>
>>     <tel:1-800-535-7252>* or *311*.
>>
>>
>>
>>
>>     _______________________________________________
>>     Xymon mailing list
>>     Xymon at xymon.com<mailto:Xymon at xymon.com> <mailto:Xymon at xymon.com>
>>     http://lists.xymon.com/mailman/listinfo/xymon
>>
>>
>>
>>
>> _______________________________________________
>> Xymon mailing list
>> Xymon at xymon.com<mailto:Xymon at xymon.com>
>> http://lists.xymon.com/mailman/listinfo/xymon
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com<mailto:Xymon at xymon.com>
> http://lists.xymon.com/mailman/listinfo/xymon
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20131212/aca49b4d/attachment.html>
    
    
More information about the Xymon
mailing list