[Xymon] (no subject)

[Martin Flemming]

On Fri, 2 Mar 2012, Venkatesh Subbaramu wrote:

> 
> Thanks Chris  ! Somebody had changed the bbwin.cfg which was causing the problem .Thanks again for your input .
> 
>  
> 
> I did have another question .I have many counters like dbcheck ,xymond ,port which I do not want to display .How can this be hidden ?
>


General, you put only the test you want to see with

group-only in your host.cfg

http://www.xymon.com/xymon/help/manpages/man5/hosts.cfg.5.html

group-only COLUMN1|COLUMN2|COLUMN3 [group-title]
     Same as the "group" and "group-compress" lines, but includes only the 
columns explicitly listed in the group. Any columns not listed will be 
ignored for these hosts.

cheers,
 	martin


>  
> 
> Regards,
> 
> Venkatesh
> 
>  
> 
> From: Chris.Morris at rwe.com [mailto:Chris.Morris at rwe.com]
> Sent: Friday, March 02, 2012 2:22 PM
> To: Venkatesh Subbaramu
> Cc: xymon at xymon.com
> Subject: RE: [Xymon] (no subject)
> 
>  
> 
> The xymon client isn't running hence not sending data to the server! Or the xymon client is running but sending data to the wrong place!
> 
>  
> 
> 
> _____________________________________________________________________________________________________________________________________________________
> 
> 
> From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Venkatesh Subbaramu
> Sent: 01 March 2012 11:00
> To: xymon at xymon.com
> Subject: [Xymon] (no subject)
>
>       Hi All , The xymon counters (like CPU,disk, memory etc ) being monitored for remote server  (2nd server in the list ) is not getting
>       updated .However the server is available .Could you pls suggest dome troubleshooting tips ?
>
>        
>
>        
>
>       Regards,
>
>       Venkatesh
>
>        
> 
> ****************************************************************************
> 
> The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed.
> If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any
> review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please
> contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that
> neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any).
> 
>  
> 
> *****************************************************************************
> 
>  
> 
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are not
> to copy, disclose, or distribute this e-mail or its contents to any other person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has taken
> every reasonable precaution to minimize this risk, but is not liable for any damage
> you may sustain as a result of any virus in this e-mail. You should carry out your
> own virus checks before opening the e-mail or attachment. Infosys reserves the
> right to monitor and review the content of all messages sent to or from this e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>