[Xymon] Separate column for network interface stats?
Jeremy Laidman
jlaidman at rebel-it.com.au
Thu Jul 26 05:10:56 CEST 2012
What about adding these line into analysis.cfg to each server you want to
monitor:
DS ifstat ifstat.eth0.rrd:bytesSent >50000000 COLOR=yellow
"TEXT=eth0 &V bytes out is higher than threshold &U"
DS ifstat ifstat.eth0.rrd:bytesReceived >50000000 COLOR=yellow
"TEXT=eth0 &V bytes in is higher than threshold &U"
DS ifstat ifstat.eth0.rrd:bytesSent >70000000 COLOR=red "TEXT=eth0
&V bytes out is higher than threshold &U"
DS ifstat ifstat.eth0.rrd:bytesReceived >70000000 COLOR=red
"TEXT=eth0 &V bytes in is higher than threshold &U"
J
On Mon, Jul 23, 2012 at 10:57 PM, John Horne <john.horne at plymouth.ac.uk>wrote:
> On Fri, 2012-07-20 at 10:30 +1000, Jeremy Laidman wrote:
> > John
> >
> >
> > You need three things to make this happen: a) the ifstat page needs to
> > exist, b) svcstatus.cgi needs to know that graphs exist, and c) an
> > [ifstat] graph definition must exist in graphs.cfg.
> >
> Hello,
>
> Thanks for this. However, I should have thought it through a bit more.
> What I actually want is to monitor the network interface(s) so that if
> the bandwidth gets to, say, 70% utilised then we get a yellow status, at
> 90% we get red. Similar to the 'cpu' and 'disk' monitoring and the
> LOAD/DISK entries in the analysis.cfg file. I was hoping that something
> similar was available for the network interfaces (and that we could have
> a separate column for 'ifstat' as well).
>
> I suspect I'll need to write a short script to detect the bandwidth
> being used by the clients and send the relevant status back to the
> server.
>
>
>
>
> John.
>
> --
> John Horne Tel: +44 (0)1752 587287
> Plymouth University, UK Fax: +44 (0)1752 587001
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20120726/7bf3f340/attachment.html>
More information about the Xymon
mailing list