[Xymon] .default. not working?

[Mark Mulligan]

Have you tried changing testip to noconn so that it does not try to resolve the IP address?   The example in hosts.cfg does not use a testip.  

Thanks, 
Mark 

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Jon Dustin
Sent: Monday, April 16, 2012 3:23 PM
Cc: xymon at xymon.com
Subject: Re: [Xymon] .default. not working?

Can anyone think of a way I can debug the processing of hosts.cfg? For some reason my ".default." entry is not being read correctly, and no matter what I try Xymon complains. 

Thanks for reading. 

Sent from a mobile device, please excuse any typos.


-----Original Message-----
From: Jon Dustin [jdustin at usm.maine.edu]
Received: Monday, 16 Apr 2012, 8:27
CC: xymon at xymon.com [xymon at xymon.com]
Subject: Re: [Xymon] .default. not working?



>>> "Jon Dustin" <jdustin at usm.maine.edu> 2012-04-16T08:27:57.783283 >>>
Nope, still not working:

0.0.0.0         .default.               # testip NOPROPRED:+if_load NOPROPYELLOW:+if_load

(note - there are TABS on both sides of .default. - in case that makes a difference)

Thanks for reading.

>>> On 4/16/2012 at 3:08 AM, in message
<CALMep04wRHCuimkWdDEN868C3-KPyJH5FcwyshAOW-dpQASGOw at mail.gmail.com>, Steven Carr <sjcarr at gmail.com> wrote:
> Try...
> 
> NOPROPRED:+if_load NOPROPYELLOW:+if_load
> 
> That's what I have in mine and it works.
> 
> Steve
> 
> 
> 
> On 16 April 2012 03:04, Jon Dustin <jdustin at usm.maine.edu> wrote:
> 
>> No, my .default. is all on one line. Very perplexing!
>>
>> --
>> Jon Dustin - Network Specialist
>> University of Southern Maine
>> Portland, ME  207-780-4152
>>
>> >>> Steve Holmes  04/15/12 8:15 PM >>>
>> Is the .default. really on 3 lines?  If so, that is your problem. Put 
>> it all on one line.
>>
>> Steve
>>
>> Wherever you go, there you are.
>>
>> On Apr 15, 2012, at 7:06 PM, "Jon Dustin"  wrote:
>>
>> > Greetings -
>> >
>> > I'm currently running Xymon v4.3.7, and having troubles getting the
>> ".default." entry to work properly. Here is what I have configured:
>> >
>> > page devs Network Devices
>> > 0.0.0.0         .default.               # testip NOPROPRED:if_load
>> NOPROPYELLOW:if_load
>> > (then a bunch of hosts below)
>> >
>> > It seems the .default. entry is ignored (status IS propagated 
>> > upward),
>> *and* I see the following error in xymonnet:
>> >
>> > dnsresolve - internal error, name '' not in cache
>> > xymonnet: Cannot resolve IP for host
>> >
>> > Am I misunderstanding the ".default." entry? Thanks for anything 
>> > you can
>> pass along.
>> >


-- 
 
Jon Dustin - Network Specialist
University of Southern Maine
Portland, ME  207-780-4152


_______________________________________________
Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon