[xymon] New UPS monitor added to Xymonton
Josh Luthman
josh at imaginenetworksllc.com
Thu Jul 29 04:37:47 CEST 2010
I find this works quite well for me. Notice the smaller line size the
farther down it goes - this enables you to actually see the bigger
lines above (behind) the others.
Also note that the LINE is not being commented at the end but is a
identifying a hex color.
http://imgur.com/33K2w.png
[in-voltage]
TITLE Input AC Voltage
YAXIS VAC
DEF:FIRSTUPS=in-voltage.rrd:FIRSTUPS:AVERAGE
DEF:SECONDUPS=in-voltage.rrd:FIRSTUPS:AVERAGE
DEF:THIRDUPS=in-voltage.rrd:FIRSTUPS:AVERAGE
LINE6.5:FIRSTUPS#00CCCC:FIRSTUPS
LINE3.5:SECONDUPS#CC0000:SECONDUPS
LINE1.5:THIRDUPS#FFFF00:THIRDUPS
COMMENT:\n
GPRINT:FIRSTUPS:LAST: FIRSTUPS \: %5.1lf%s (cur)
GPRINT:FIRSTUPS:MAX: \: %5.1lf%s (max)
GPRINT:FIRSTUPS:MIN: \: %5.1lf%s (min)
GPRINT:FIRSTUPS:AVERAGE: \: %5.1lf%s (avg)\n
GPRINT:SECONDUPS:LAST: SECONDUPS \: %5.1lf%s (cur)
GPRINT:SECONDUPS:MAX: \: %5.1lf%s (max)
GPRINT:SECONDUPS:MIN: \: %5.1lf%s (min)
GPRINT:SECONDUPS:AVERAGE: \: %5.1lf%s (avg)\n
GPRINT:THIRDUPS:LAST: THIRDUPS \: %5.1lf%s (cur)
GPRINT:THIRDUPS:MAX: \: %5.1lf%s (max)
GPRINT:THIRDUPS:MIN: \: %5.1lf%s (min)
GPRINT:THIRDUPS:AVERAGE: \: %5.1lf%s (avg)\n
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 28, 2010 at 7:39 PM, Josh Luthman
<josh at imaginenetworksllc.com> wrote:
> I see! Would be nice to have an example or place to document this in more
> detail. Could we start a public Xymon Wiki for these kinds of things?
>
> I believe I have it correct - three DEF, LINE and GPRINT lines (note that
> they are being escaped with \ ) for three UPS units. I'm not certain as the
> data is all at 120v at the moment.
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
>
> On Wed, Jul 28, 2010 at 6:20 PM, Ralph Mitchell <ralphmitchell at gmail.com>
> wrote:
>>
>> You mean like this extract from hobbitgraph.cfg??
>> [users]
>> TITLE Users and Processes
>> YAXIS #
>> DEF:p=procs.rrd:la:AVERAGE
>> DEF:u=users.rrd:la:AVERAGE
>> AREA:p#00CC00:Processes
>> LINE1:u#000099:Users
>> Multiple DEFs with as many rrds as you like... :)
>> Ralph Mitchell
>>
>> On Wed, Jul 28, 2010 at 2:59 PM, Josh Luthman
>> <josh at imaginenetworksllc.com> wrote:
>>>
>>> Never mind, missing the name of my UPS on hobbitgraphs.
>>>
>>> How does one put multiple UPS on a single graph, though? I'm looking
>>> at the disk statement and I don't see where a second rrd file comes in
>>> to play. Is it necessary for one graph to load from one rrd file?
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>>
>>>
>>> On Wed, Jul 28, 2010 at 2:41 PM, Josh Luthman
>>> <josh at imaginenetworksllc.com> wrote:
>>> > I am having an issue with the graphs. Is it possible the RRD was
>>> > created without supporting of two decimal places?
>>> >
>>> > They are being referenced on their pages but the image does not show
>>> > up. The RRD files exist and do have values:
>>> >
>>> > -> rrdtool dump out-voltage.rrd |grep "name\|type\|last_ds"
>>> > <name> 111111111</name>
>>> > <type> GAUGE </type>
>>> > <last_ds> 119.00 </last_ds>
>>> > <name> 222222222</name>
>>> > <type> GAUGE </type>
>>> > <last_ds> 121.00 </last_ds>
>>> > <name> 33333333333</name>
>>> > <type> GAUGE </type>
>>> > <last_ds> 120.00 </last_ds>
>>> >
>>> >
>>> > Josh Luthman
>>> > Office: 937-552-2340
>>> > Direct: 937-552-2343
>>> > 1100 Wayne St
>>> > Suite 1337
>>> > Troy, OH 45373
>>> >
>>> >
>>> >
>>> > On Wed, Jul 28, 2010 at 12:59 PM, Josh Luthman
>>> > <josh at imaginenetworksllc.com> wrote:
>>> >> That fixed it! Thank you!
>>> >>
>>> >> Josh Luthman
>>> >> Office: 937-552-2340
>>> >> Direct: 937-552-2343
>>> >> 1100 Wayne St
>>> >> Suite 1337
>>> >> Troy, OH 45373
>>> >>
>>> >>
>>> >> On Wed, Jul 28, 2010 at 12:46 PM, Bill Arlofski
>>> >> <waa-hobbitml at revpol.com>
>>> >> wrote:
>>> >>>
>>> >>> On 07/28/10 12:29, Josh Luthman wrote:
>>> >>> > >Unless I am mistaken, the test I wrote will be set the status to
>>> >>> > yellow if
>>> >>> > the
>>> >>> >> UPS load is greater than or equal to $yellowtest (80%) and the
>>> >>> >> status
>>> >>> >> will
>>> >>> > be
>>> >>> >> set to red if the UPS load is eualto or greater than $redtest
>>> >>> >> (80%).
>>> >>> >
>>> >>> > While this may be your intention that is not what I'm seeing. I am
>>> >>> > getting
>>> >>> > a red condition with these loads.
>>> >>> >
>>> >>> > - UPS load % for apcxxxxxr01 apcyyyy01 apczzzzzzzzz01 on 127.0.0.1
>>> >>> >
>>> >>> > apcxxxxxx01 : 51.00
>>> >>> > apcyyyy01 : 11.00
>>> >>> > apczzzzzzzz01 : 12.00
>>> >>> >
>>> >>> > My yellow and red are 80 and 90 like you suggest (or at least your
>>> >>> > default
>>> >>> > is =)
>>> >>> >
>>> >>> > -> cat ~myhobbituser/server/ext/xymon_nut_ups-load.sh|grep test
>>> >>> > datatest="ups\.load:"
>>> >>> > yellowtest="80"
>>> >>> > redtest="90"
>>> >>> >
>>> >>> > Josh Luthman
>>> >>>
>>> >>>
>>> >>> Ah... I see it...
>>> >>>
>>> >>> Your UPS reports load % with two decimal points (51.00), mine reports
>>> >>> %
>>> >>> load
>>> >>> with one (35.6)
>>> >>>
>>> >>> So the logic in the script is correct, but the part where I was
>>> >>> stripping
>>> >>> past
>>> >>> the decimal failed to take into account more than one decimal.
>>> >>>
>>> >>> By only stripping the decimal and one numeral past it, the test is
>>> >>> saying
>>> >>> "if
>>> >>> 510 > 90 then set the status to red"
>>> >>>
>>> >>>
>>> >>> To fix it, change the line:
>>> >>>
>>> >>> datanopoint=`echo "$data" | "$SED" -e 's/\.[0-9]//'`
>>> >>>
>>> >>> to
>>> >>>
>>> >>> datanopoint=`echo "$data" | "$SED" -e 's/\.[0-9]\{1,2\}//'`
>>> >>>
>>> >>>
>>> >>> P.S. I already made all the changes I mentioned in may last email and
>>> >>> will
>>> >>> be
>>> >>> putting up the simplified versions possibly later today, including
>>> >>> this
>>> >>> fix.
>>> >>>
>>> >>>
>>> >>> Thanks Josh
>>> >>>
>>> >>> --
>>> >>> Bill Arlofski
>>> >>> Reverse Polarity, LLC
>>> >>>
>>> >>> To unsubscribe from the xymon list, send an e-mail to
>>> >>> xymon-unsubscribe at xymon.com
>>> >>>
>>> >>>
>>> >>
>>> >>
>>> >
>>>
>>> To unsubscribe from the xymon list, send an e-mail to
>>> xymon-unsubscribe at xymon.com
>>>
>>>
>>
>
>
More information about the Xymon
mailing list