[hobbit] SPLITNCV and graphs

[Graham Nayler]

Hmmm.... yes, I've just tried testing this on a SPLITNCV test, and am seeing 
what you describe. I do get single lines per graph on the specific test 
display for custom script handling though. From brief perusal of the 
sources, I've not yet found why it's different between custom script and 
standard NCV handling.

(Scratching head smiley)

Graham

----- Original Message ----- 
From: "Gore, David W" <david.gore at verizonbusiness.com>
To: <hobbit at hswn.dk>
Sent: Friday, May 08, 2009 4:39 PM
Subject: RE: [hobbit] SPLITNCV and graphs


> -----Original Message-----
> From: Graham Nayler [mailto:graham.nayler at hallmarq.net]
> Sent: Friday, May 08, 2009 14:27
> To: hobbit at hswn.dk
> Subject: Re: [hobbit] SPLITNCV and graphs
>
> I'm doing what you're after using a custom script instead of
> SPLITNCV, but the two are closely related, and I think this
> works for what you are doing.
>
> In the file hobbitserver.cfg, add your test name to the
> GRAPHS entry followed by "::1" i.e.
> GRAPHS="la,disk.....,lines,ifmib::1,test::1"
>
> This sets the limit of the number of traces per graph, so set
> it to "test::2" if e.g. you wanted two traces per graph
>
> BTW, I assume there is a typo in your DEF: line below, it
> should be lambda not lanbda
>
> Graham
>
> ----- Original Message -----
> From: "Gatis A." <gatis.anee at gmail.com>
> To: <hobbit at hswn.dk>
> Sent: Friday, May 08, 2009 10:32 AM
> Subject: [hobbit] SPLITNCV and graphs
>
>
> > Hi,
> >
> > How can I get SPLITNCV data to be drawn in seperate graphs
> not in one.
> >
> > For isntance I am going to track:
> >
> > value1 : a
> > value2 : b
> > value3 : c
> > valuex : x
> > (count of "values" will change randomly)
> >
> > then i will get following rrd files (each tracking one value)
> >
> > test,value1.rrd
> > test,value2.rrd
> > test,value3,rrd
> > test,valuex,rrd
> >
> > and with following hobbitgraph definition
> >
> > [test]
> >        FNPATTERN test,value(.*).rrd
> >        TITLE test
> >        YAXIS TEST
> >        DEF:p at RRDIDX@=@RRDFN@:lanbda:AVERAGE
> >        LINE1:p at RRDIDX@#@COLOR@:@RRDPARAM@ aa
> >
> > I am getting one graph with three(or more) lines, but I want to get
> > three(or more) seperate graphs with one line each.
> >
> > Thanks!
> >
> > --
> > Gatis
> >

Graham,

Just an FYI, I did find your previous posts very helpful!  I certainly
was able to use something like what Gatis has above to get a single
multi-graph on the specific test column and multiple single graphs under
trends.  But can you get multiple single graphs under the specific test
column?

~David

To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk