Anyone have a pre compiled solaris 10 or mac OSX client?

[William Ottley]

Hi all,
I'm a bit new with solaris 10 and mac OSX. (took a day and a half.. And
counting to figure out how to compile!)

So I thought I'd ask if anyone has a precompiled mac osx or solaris 10
client....

Thanks!

William


On 19/03/09 11:38 AM, "dOCtoR MADneSs" <doctor at makelofine.org> wrote:

> Husemann, Harald a écrit :
>> Hi,
>> 
>> you should run "devmon --readbbhosts -vvv --debug" and examine the
>> output, if it was able to contact the switch and figure out the
>> template for it from the sysdesc string.
>> 
>> hh
>> 
>> William Ottley schrieb:
>>> Yep I noticed that: but I thought it wasn't working since I didn't see
>>> anything in the log file...LOL guess I assumed something would go
>>> wrong? LOL
>>> 
>>> Anyways I noticed the hosts.db file was being udpated.
>>> 
>>> Now the next step is to figure out how I go about doing the tests:
>>> bandwidth, uptime, etc for the asa5500
>>> 
>>> 
>>> On 19/03/09 10:21 AM, "Husemann, Harald" <Harald.Husemann at materna.de>
>>> wrote:
>>> 
>>>> Hi William,
>>>> 
>>>> all you have to do is including your switches in the bb-hosts, with a
>>>> line like this:
>>>> 
>>>> <ip> <host> # DEVMON
>>>> 
>>>> Then, run "devmon --readbbhosts", and the devmon process will start
>>>> polling the switch.
>>>> 
>>>> HTH,
>>>> 
>>>> Harald
>>>> 
>>>> William Ottley schrieb:
>>>>> Well we have a few 2600's, and an ASA5500 that I'd like to grab
>>>>> info from,
>>>>> such as up time, bandwidth usage, etc....
>>>>> I saw that there is a template for cisco ASA so I'm hoping its for
>>>>> that
>>>>> machine.
>>>>> 
>>>>> I'm new at this, and just trying to figure out what "switches" I
>>>>> have to put
>>>>> into the bb-hosts files...
>>>>> 
>>>>> (still haven't figured out what area to change: bb-hosts or the client
>>>>> config files)...
>>>>> 
>>>>> 
>>>>> 
>>>>> On 19/03/09 9:38 AM, "McDonald, Dan"
>>>>> <Dan.McDonald at austinenergy.com> wrote:
>>>>> 
>>>>>> On Wed, 2009-03-18 at 12:29 -0400, William Ottley wrote:
>>>>>>> Is there a Cisco monitoring script that I could use?
>>>>>> Although you will hear many calls for devmon, devmon does not
>>>>>> currently
>>>>>> support snmp v3.  If that is a requirement for you, then I would
>>>>>> recommend using mrtg with appropriate templates, and bbmrtg.pl to
>>>>>> report
>>>>>> the values to xymon.  I use that technique to monitor 135 UPS, 94
>>>>>> temperature/humidity probes, 19 firewalls, and close to 300 Cisco
>>>>>> routers/switches.
>>>>>> 
>>>>> 
>>>>> 
>>> 
>>> 
>>> 
>> 
> Hi,
> 
> I'm looking for some Cisco devmon templates 2950, 1240 and ASA5500.
> Tks for any help
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
> 
> 



-- 
This message has been scanned for dangerous content by MailScanner, and is believed to be clean.