[hobbit] monitoring Solaris client

[Ambati Srinivas]

Hi Martin,

~hobbit/client/logs/hobbitclient.log file have below log entries and no
other.

-bash-3.00$ less hobbitclient.log
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory
Killed
ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
direc
tory

I did get a successful tenet to server from client as shown below:

-bash-3.00$ telnet xxx.xxx.xx.xx9 1984
Trying xxx.xxx.xx.xx9...
Connected to xxx.xxx.xx.xx9.
Escape character is '^]'.
Connection to xxx.xxx.xx.xx9 closed by foreign host.
-bash-3.00$


Please advice.

Thanks,

Srini



On Tue, Dec 8, 2009 at 8:21 PM, Ward, Martin <Martin.Ward at colt.net> wrote:

>  Srinu,
>
>
>
> The fact that you cannot see any disk, memory or other information points
> to the fact that the client Xymon program is not running, or is talking to
> your server on a different IP address.
>
>
>
> Bring up the Xymon web page and look at the Ghost Clients report page. Is
> your client listed there? Maybe under a different IP address?
>
>
>
> If you cannot see anything useful in this page then login to the client and
> change to the ~hobbit/client/logs directory. Look in the hobbitclient.log
> file for connectivity issues. Also, whilst on the client try connecting to
> the Xymon server on port 1984 like so:
>
> $ telnet xymon.server.ip.address 1984
>
>
>
> You should get a "connected" notice. If you don't then there is a
> firewall/network/routing issue between the two boxes.
>
>
>
> |\/|artin
>
>
>
> *From:* Ambati Srinivas [mailto:am.srini at gmail.com]
> *Sent:* 08 December 2009 11:47
> *To:* hobbit at hswn.dk
> *Subject:* [hobbit] monitoring solaris client
>
>
>
> Hi,
>
> I just installed  on a solaris box (SunOS pluto 5.10 Generic_120011-14
> sun4u sparc SUNW,Ultra-250), I have edited ~/etc/hobbitclient.cfg and given
> xymon server IP and on Xymon server ~/server/etc/bb-hosts and added this sun
> box ip address and hostname.
>
>  I can only see conn, info, trends data. others such as cpu, disk, memory,
> msgs are all empty. Am I missing something basic here or any config changes
> I had to take care.
>
> bash-3.00# MAKE=gmake ./configure.client
>
> Configuration script for Hobbit client
>
> This script asks a few questions and builds a Makefile to compile Hobbit
>
> Checking your make-utility
>
> Hobbit normally keeps all of the client configuration files
> on the Hobbit server. If you prefer, it is possible to use
> a local client configuration file instead - if so, answer
> 'client' to the next question.
> NB: Local configuration requires the PCRE libs on each host.
>
> Server side client configuration, or client side [server] ?
> client
>
> Checking for the PCRE libraries
> Checking for PCRE ...
> Found PCRE include files in /opt/sfw/include
> Found PCRE libraries in /opt/sfw/lib
>
>
> Checking for Large File Support ...
> ERROR: LFS support check failed for standard file support
>
>
> What userid will be running Hobbit [hobbit] ?
> xymon
>
> Found passwd entry for user xymon:x:60040:1::/export/home/xymon:/bin/bash
>
>
> Where do you want the Hobbit installation [/export/home/xymon] ?
>
> OK, will configure to use /export/home/xymon as the Hobbit toplevel
> directory
>
>
> What is the IP-address of your Hobbit server [127.0.0.1] ?
> xxx.xxx.xx.x6
>
>
>
> Using SunOS Makefile settings
>
>
>
> Created Makefile with the necessary information to build Hobbit
> Some defaults are used, so do look at the Makefile before continuing.
>
> Configuration complete - now run gmake (GNU make) to build the tools
> bash-3.00#
>
>
>
> bash-3.00# gmake
> bash-3.00# gmake install
>
>
> bash-3.00# vi etc/hobbitclient.cfg
> "etc/hobbitclient.cfg" 52 lines, 1690 characters
> # Environment settings for the Hobbit client.
>
> BBDISP="xxx.xxx.xx.xx9"             # IP address of the Hobbit server
>
>
> bash-3.00# ./runclient.sh start
> Hobbit client for sunos started on pluto
>
>
> -bash-3.00# vi /export/home/xymon/server/etc/bb-hosts
> xxx.xxx.xx.x6   APT-NCC-NSW-rhoSpluto
>
>
> Let me know what all other information I can provide.
>
> Thanks all for your help,
>
> Srinu
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20091209/6497cebc/attachment.html>