[Xymon] rrd files not getting created. - SUMMARY

navraj shrestha shresthanav17 at gmail.com
Wed Dec 7 18:08:42 CET 2016


looks like rrdtool didn't install correctly or may be I am missing some
prerequisites packages.
Do you have any guide to install xymon?
Or do you know what packages needs to be installed?


thanks


On Wed, Dec 7, 2016 at 10:57 AM, Root, Paul T <Paul.Root at centurylink.com>
wrote:

> I’d look to find the showgraph.sh script and work on figuring out why your
> installation failed.
>
>
>
> *From:* navraj shrestha [mailto:shresthanav17 at gmail.com]
> *Sent:* Wednesday, December 07, 2016 10:54 AM
>
> *To:* Root, Paul T; xymon at xymon.com
> *Subject:* Re: [Xymon] rrd files not getting created. - SUMMARY
>
>
>
> yes, they are installed
>
>
>
> so what can be done now
>
>
>
> On Wed, Dec 7, 2016 at 10:43 AM, Root, Paul T <Paul.Root at centurylink.com>
> wrote:
>
> You don’t have a complete install of xymon.
>
>
>
> Do you have rrdtool and rrdtool-devel installed?
>
>
>
> *From:* navraj shrestha [mailto:shresthanav17 at gmail.com]
> *Sent:* Wednesday, December 07, 2016 10:21 AM
> *To:* Root, Paul T; xymon at xymon.com
>
> *Subject:* Re: [Xymon] rrd files not getting created. - SUMMARY
>
>
>
> Yes this is  a new install on Rhel 7.2, xymon 4.3.27
>
> I haven't got any graphs, not in trends too.
>
> checked for showgraph.sh in cgi-bin , it doesn't exist there
>
>  <Directory "/usr/lib/xymon/cgi-bin">
>
> So what do I have to do now,
>
> and my rrd directory is also empty.
>
>
>
>
>
> Thanks
>
>
>
>
>
>
>
>
>
> On Wed, Dec 7, 2016 at 8:47 AM, Root, Paul T <Paul.Root at centurylink.com>
> wrote:
>
> Sorry, I saw this yesterday, but then got side tracked, and didn’t answer.
>
>
>
> First, NEVER remove the mailing list, there are so many guys that know so
> much more about xymon than I  do. And that goes for just about everyone
> except maybe Henrik and JC.
>
>
>
> So this looks like a configuration issue in general, not a failed custom
> graph.
>
>
>
> Do you get graphs for anything? In trends of in specific tests?
>
> Does showgraph.sh exist in you xymon-cgi directory?    You can find you
> xymon-cgi directory location in the xymon-apache.conf file, which should be
> in  your httpd configuration directory.
>
> Is this a new install?
>
> What version of xymon are using, and what operating system?
>
>
>
>
>
> *From:* navraj shrestha [mailto:shresthanav17 at gmail.com]
> *Sent:* Monday, December 05, 2016 6:34 PM
> *To:* Root, Paul T
> *Subject:* Re: [Xymon] rrd files not getting created. - SUMMARY
>
>
>
> thanks Root for your reply,
>
>
>
> When I click magnifying glass I get this error"The requested URL
> /xymon-cgi/showgraph.sh was not found on this server". And I am not
> creating a custom graphs, Do I have to make any changes to xymonserver.cfg?
>
>
>
> Thanks
>
>
>
> Navraj
>
>
>
> On Mon, Dec 5, 2016 at 9:28 AM, Root, Paul T <Paul.Root at centurylink.com>
> wrote:
>
> I thought I would just summarize my experience.
>
>
>
> It is important that the rrd file you want to create doesn’t exist before
> you do the restart of the xymond_rrd processes. It is VERY finicky.
>
>
>
> Then moving onto the graph creation.   I stumbled on debugging
> information. If the graph isn’t created, click on the magnifying glass next
> to it, and it will give you an error message, that is a clue as to why the
> graph wasn’t made.
>
>
>
> Also, the example on “Custom Graphs” page is invalid. It doesn’t work. The
> %s in the GPRINTs are invalid. I also had a typo with DEV instead of DEF,
> and we all know the V vs F issue with the human mind.
>
> When creating a graph, start very simple, just TITLE, YAXIS and DEF lines,
> and then add things one at a time to get what you want.
>
>
>
> Paul.
>
>
>
> *From:* Root, Paul T
> *Sent:* Thursday, December 01, 2016 11:12 AM
> *To:* Root, Paul T; xymon at xymon.com
> *Subject:* RE: [Xymon] rrd files not getting created.
>
>
>
> Ok, I took the changes out. restarted xymon, waited a half hour, put them
> back in,  and it created the rrd file.
>
>
>
> HOWEVER, it only put it in once, and no updates:
>
>
>
> <?xml version="1.0" encoding="utf-8"?>
>
> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">
>
> <!-- Round Robin Database Dump --><rrd> <version> 0003 </version>
>
>         <step> 300 </step> <!-- Seconds -->
>
>         <lastupdate> 1480607277 </lastupdate> <!-- 2016-12-01 *09:47:57
> CST* -->
>
>
>
>         <ds>
>
>                 <name> ucfthreads </name>
>
>                 <type> GAUGE </type>
>
>                 <minimal_heartbeat> 600 </minimal_heartbeat>
>
>                 <min> NaN </min>
>
>                 <max> NaN </max>
>
>
>
>                 <!-- PDP Status -->
>
>                 <last_ds> 92 </last_ds>
>
>                 <value> 1.6284000000e+04 </value>
>
>                 <unknown_sec> 0 </unknown_sec>
>
>         </ds>
>
>
>
> <!-- Round Robin Archives -->   <rra>
>
>
>
>
>
> And the script runs every 5 minutes from clientlaunch.cfg.
>
>
>
>
>
> *From:* Xymon [mailto:xymon-bounces at xymon.com <xymon-bounces at xymon.com>] *On
> Behalf Of *Root, Paul T
> *Sent:* Thursday, December 01, 2016 9:55 AM
> *To:* xymon at xymon.com
> *Subject:* [Xymon] rrd files not getting created.
>
>
>
> Where do I go look to figure out why the rrd file is not getting created?
>
>
>
> I have a script that produces output like this with a test name of ‘ucf’:
>
>
>
> green
>
>
>
> ucf_threads  :    14
>
>
>
> And that is all I’m sending currently. At this point, it’s a simulated
> script and then number is between 1-100.
>
>
>
> In xymonserver.cfg I have
>
>
>
> TEST2RRD=”….,ucf=ncv”
>
> NCV_ucf="ucfthreads:GAUGE"
>
>
>
> I have two servers. My production, and a test server, with this config,
> and the test server briefly created the rrd,  then I renamed the test (from
> myg to ucf), c hanged the TEST2RRD and NCV_myg to NCV_ucf.
>
>
>
> I’ve restarted xymon completely, and killed the xymond_rrd processes.
> Nothing shows up in rrd_status.log or rrd_data.log
>
>
>
>
>
> All the machines are CentOS 6 running xymon 4.3.21. We have successfully
> got custom graphs working in the past, but no luck at this point.
>
> Ultimately, I believe the script will live on a RedHat 7 client. The xymon
> server will remain CentOS 6 for the forseeable future.
>
>
>
> Paul.
>
>
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon
>
>
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
>
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20161207/001a8150/attachment.html>


More information about the Xymon mailing list