[Xymon] Windows Xymon PS Client 1.98

zak.beck at accenture.com zak.beck at accenture.com
Wed Feb 25 10:34:36 CET 2015


Hi

 

Hmm, yes, I can replicate that. 

 

Also, for the Powershell v1 thing, I've moved the arithmetic into the c#
code so we should avoid this. I don't really have a way of testing against
PS v1 at the moment but v2 and v4 seem to be OK.

 

I've committed an update for both of these issues (and the RRD bug, see
other message).

 

Thanks

Zak 

 

From: Brandon Dale [mailto:BDale at kitchengroup.com.au] 
Sent: 25 February 2015 02:09
To: Gavin Stone-Tolcher; Beck, Zak; xymon at xymon.com
Subject: RE: Windows Xymon PS Client 1.98

 

I haven't used this before but I just tested and had the same problem. 

 

I had this in my clientconfigfile clientversion:1.98:\\testserver01\test\ 

 

It looks like its inserting the file name into the path rather than just the
version number.

 

Regards, 

 

 

Brandon Dale

Network Administrator

 

Kitchen | Group

 

1 Wella Way Somersby, NSW, 2250

T (02) 4343 6000 | D (02) 4343 6052 | F (02) 4343 6080

E  <mailto:%20BDale at kitchengroup.com.au> BDale at kitchengroup.com.au

please consider the environment before printing this e-mail

  _____  

Disclaimer: This communication is confidential and intended only for the
addressee. It may contain legally privileged information. By the use of
email over the Internet, Kitchen Group is not waiving either confidentiality
of, or legal privilege in, the contents of this email and any attachments.
If you are not the addressee you may not use, disseminate or copy this
information. If you have received this information in error please notify us
immediately. Whilst we have taken all reasonable care to ensure that neither
our system, this email nor any attachments has a virus, it is impossible to
guard against every possible virus. We advise you to scan the email and any
attachments with your anti virus software prior to use. We do not accept
liability for any loss or damage which may arise from receipt of this email
or any attachments.

  _____  

 

 

 

From: Xymon [ <mailto:xymon-bounces at xymon.com>
mailto:xymon-bounces at xymon.com] On Behalf Of Gavin Stone-Tolcher
Sent: Wednesday, 25 February 2015 11:44 AM
To: 'zak.beck at accenture.com';  <mailto:xymon at xymon.com> xymon at xymon.com
Subject: Re: [Xymon] Windows Xymon PS Client 1.98

 

Oh, I forgot to mention I had a failure during the attempt to auto update
the client from a share:

 

2015-02-25 10:31:59  Executing XymonCheckUpdate

2015-02-25 10:31:59  Running version 1.97; config version 1.98; attempting
upgrade

2015-02-25 10:32:00  New version
<file:///\\GST\WinPSClient\xymonclient_xymonclient_1.98.ps1.ps1>
\\GST\WinPSClient\xymonclient_xymonclient_1.98.ps1.ps1 cannot be found -
aborting upgrade

2015-02-25 10:32:00  Delaying until next run: 30 seconds

 

The share is just a local share on the test machine running the client with
read access to everyone. Manually mounting  <file:///\\GST\WinPSClient\>
\\GST\WinPSClient\ on the machine:

 

C:\Users\ccgavin>net use U:  <file:///\\GST\WinPSClient> \\GST\WinPSClient

The command completed successfully.

 

C:\Users\ccgavin>dir U:\

Volume in drive U is SYSTEM

Volume Serial Number is E0FB-17E1

 

Directory of U:\

 

25/02/2015  09:58 AM    <DIR>          .

25/02/2015  09:58 AM    <DIR>          ..

25/02/2015  09:55 AM           100,532 xymonclient_1.98.ps1

               1 File(s)        100,532 bytes

               2 Dir(s)  64,899,543,040 bytes free

 

Am I doing something wrong?

 

I have manually put the new version in place for now.

 

 

Cheers,

Gavin Stone-Tolcher, IT Support Officer, Network Operations and Incident
Response

Information Technology Services

The University of Queensland

Level 4, Prentice Building, St Lucia 4072

T: +61 7 334 66645, M: +61 401 140 838

E:  <mailto:g.stone-tolcher at its.uq.edu.au> g.stone-tolcher at its.uq.edu.au W:
<http://www.its.uq.edu.au> www.its.uq.edu.au

 

ITS: Service. Team. Accountability. Results.

 

IMPORTANT: This email and any attachments are intended solely for the
addressee(s), contain copyright material and are confidential. We do not
waive any legal privilege or rights in respect of copyright or
confidentiality. Except as intended addressees are otherwise permitted, you
do not have permission to use, disclose, reproduce or communicate any part
of this email or its attachments. Statements, opinions and information not
related to the official business of The University of Queensland are neither
given nor endorsed by us. By using this email (including accessing any
attachments or links) you agree we are not liable for any loss or damage of
any kind arising in connection with any electronic defect, virus or other
malicious code we did not intentionally include.

 

Please consider the environment before printing this email.

 

CRICOS Code 00025B

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20150225/5bf8ed94/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1161 bytes
Desc: not available
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20150225/5bf8ed94/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6831 bytes
Desc: not available
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20150225/5bf8ed94/attachment.bin>


More information about the Xymon mailing list