[Xymon] cpu load

Martin Lenko lenko99 at gmail.com
Tue Aug 26 11:34:27 CEST 2014


Hi,
the load on linux systems is considered high when it is higher than number
for CPUs seen by the system. The value is a number of processes waiting in
queue to get CPU time (even if it is waiting for disk I/O), not a
utilisation in percentage so 50/55 is too high unless you have a server
with 40-48 CPUs/cores. My default setting is "LOAD 5.0 10.0"  for all
machines with 4 CPUs.

Regards,
Martin


On 25 August 2014 16:03, Novosielski, Ryan <novosirj at ca.rutgers.edu> wrote:

> Not if it's not a good idea for you to have a load of 55 on your system.
>
> --
> ____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences*
> || \\UTGERS      |---------------------*O*---------------------
> ||_// Biomedical | Ryan Novosielski - Senior Technologist
> || \\ and Health | novosirj at rutgers.edu- 973/972.0922 (2x0922)
> ||  \\  Sciences | OIRT/High Perf & Res Comp - MSB C630, Newark
>     `'
>
> On Aug 25, 2014, at 10:54, usa ims <usaims at yahoo.com> wrote:
>
> I just got a critical on a system saying that my load was critical:
>
> But it is not under load:
>
> top - 10:33:08 up 37 days, 23:20,  0 users,  load average: 0.88, 0.79, 0.73
> Tasks: 390 total,   1 running, 389 sleeping,   0 stopped,   0 zombie
> Cpu(s):  1.0%us,  0.5%sy,  0.0%ni, 98.4%id,  0.1%wa,  0.0%hi,  0.0%si,
>  0.0%st
> Mem:  74377396k total,  6224692k used, 68152704k free,   661256k buffers
> Swap:        0k total,        0k used,        0k free,  2117028k cached
>
>  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
>
> 19487 www-data  15  -5  451m 202m  12m S    2  0.3  44:12.04 mono
>
> 19490 www-data  15  -5  449m 195m  12m S    2  0.3  37:49.91 mono
>
> 19499 www-data  15  -5  451m 199m  12m S    2  0.3  44:15.72 mono
>
> 19508 www-data  15  -5  442m 199m  12m S    2  0.3  43:58.24 mono
>
> 19513 www-data  15  -5  442m 202m  12m S    2  0.3  44:07.38 mono
>
> 19514 www-data  15  -5  451m 199m  12m S    2  0.3  44:02.62 mono
>
> 19515 www-data  15  -5  515m 196m  12m S    2  0.3  44:03.74 mono
>
> 19516 www-data  15  -5  508m 199m  12m S    2  0.3  44:07.35 mono
>
> 19517 www-data  15  -5  453m 198m  12m S    2  0.3  43:52.04 mono
>
> 29604 hobbit    20   0 10940 1344  824 R    2  0.0   0:00.03 top
>
> So in my localcient.cfg, I changed the load on cpu to 'LOAD    50.0 55.0'
>
> Was that a good idea?
>
> usaims
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> DEFAULT
>        # These are the built-in defaults.
>        UP      1h
>        LOAD    50.0 55.0
>        DISK    * 90 95
>        MEMPHYS 100 101
>        MEMSWAP 50 80
>        MEMACT  90 97
>
>
>
>
>
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20140826/597ed456/attachment.html>


More information about the Xymon mailing list