[Xymon] showgraph.cgi on Xymon 4.3.12

Novosielski, Ryan novosirj at ca.rutgers.edu
Mon Oct 7 21:26:32 CEST 2013


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Well, the fonts exist anyhow. And they existed before the upgrade too.

Luckily, I've been able to determine that the upgrade from Solaris
10u10 to Solaris 10u11 was the start of this problem (had an old BE
around and I booted back and everything is fine). That doesn't explain
it though.

I recompiled showgraph.cgi too. No real difference. Maybe a little
faster, but still runs for 25 seconds just to make one graph.

On 10/04/2013 06:04 PM, Ralph Mitchell wrote:
> The show graph.cgi binary is compiled with the rrdtool libraries,
> which in turn require some basic fonts to be able to write on the
> graphs..
> 
> OK, to get the obvious questions out of the way, do all those font
> files really exist? Are you running any kind of X11 client that
> needs them? If not, can you relocate most of them somewhere else
> and see if that improves things?
> 
> You should be able to see in the source what fonts are required by
> show graph.c
> 
> Ralph Mitchell
> 
> On Oct 4, 2013 2:58 PM, "Novosielski, Ryan"
> <novosirj at ca.rutgers.edu <mailto:novosirj at ca.rutgers.edu>> wrote:
> 
> On 10/04/2013 12:54 PM, Japheth Cleaver wrote:
> 
> 
>> On Fri, October 4, 2013 8:59 am, Novosielski, Ryan wrote:
>>> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
>>> 
>>> Any ideas? Sorry to repost, but there was nothing but silence 
>>> the first time.
>>> 
>>> On 09/30/2013 04:04 PM, Novosielski, Ryan wrote:
>>>> Hi all,
>>>> 
>>>> I was hoping you might be able to help me with a problem
>>>> with showgraph.cgi. It works, but lately it's been taking an 
>>>> inordinate amount of time to complete. I did a truss on the 
>>>> process when it runs, and it looks like what it's doing is 
>>>> opening an endless list of fonts:
>>>> 
>>>> stat("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansDemiBold.ttf",
>>>>
>>>>
>
>>>> 
0xFFBF6F28) = 0
>>>> open("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansDemiBold.ttf",
>>>>
>>>>
>
>>>> 
O_RDONLY) = 7 fcntl(7, F_SETFD, 0x00000001)                     = 0
> fstat(7,
>>>> 0xFFBF6D60)                         = 0 mmap(0x00000000,
>>>> 317896,
> PROT_READ,
>>>> MAP_PRIVATE, 7, 0) = 0xFE170000 close(7)
>>>> 
> = 0
>>>> munmap(0xFE170000, 317896)                  = 0
>>>> 
> stat("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansDemiOblique.ttf",
>>>>
>>>>
>
> 
0xFFBF6F28) = 0
>>>> 
> open("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansDemiOblique.ttf",
>>>>
>>>>
>
> 
O_RDONLY) = 7 fcntl(7, F_SETFD, 0x00000001)                     = 0
> fstat(7,
>>>> 0xFFBF6D60)                         = 0 mmap(0x00000000,
>>>> 91352,
> PROT_READ,
>>>> MAP_PRIVATE, 7, 0) = 0xFE1A0000 close(7)
>>>> 
> = 0
>>>> munmap(0xFE1A0000, 91352)                   = 0 
>>>> stat("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansOblique.ttf",
>>>>
>>>>
>
>>>> 
0xFFBF6F28) = 0
>>>> open("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansOblique.ttf",
>>>>
>>>>
>
>>>> 
O_RDONLY) = 7 fcntl(7, F_SETFD, 0x00000001)                     = 0
> fstat(7,
>>>> 0xFFBF6D60)                         = 0 mmap(0x00000000,
>>>> 253724,
> PROT_READ,
>>>> MAP_PRIVATE, 7, 0) = 0xFE180000 close(7)
>>>> 
> = 0
>>>> munmap(0xFE180000, 253724)                  = 0 
>>>> stat("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansRegular.ttf",
>>>>
>>>>
>
>>>> 
0xFFBF6F28) = 0
>>>> open("/usr/openwin/lib/X11/fonts/TrueType/LucidaSansRegular.ttf",
>>>>
>>>>
>
>>>> 
O_RDONLY) = 7 fcntl(7, F_SETFD, 0x00000001)                     = 0
> fstat(7,
>>>> 0xFFBF6D60)                         = 0 mmap(0x00000000,
>>>> 486132,
> PROT_READ,
>>>> MAP_PRIVATE, 7, 0) = 0xFE140000 close(7)
>>>> 
> = 0
>>>> munmap(0xFE140000, 486132)                  = 0
>>>> 
>>>> ...and so on. Any idea why this might have started happening 
>>>> and what I can do about it? The server OS is Solaris 10 
>>>> (probably relatively recently upgraded from S10u10 to
>>>> S10u11. The graph gets created immediately at the end of
>>>> these font openings.
>>> 
>>> - --
> 
>> Unfortunately, I'm not especially familiar with Solaris any
>> more... My suspicion would be that the underlying rrdtool access
>> is doing this? Is truss equivalent to running strace with "-f" in
>> follow mode? AFAIK showgraph.cgi itself wouldn't have any reason
>> to muck directly with the font files...
> 
> I suspect it's at least related to rrdtool, but when I do -f (it's
> the same as for strace), it is all the showgraph.cgi process ID
> doing the work.
> 
> 
> _______________________________________________ Xymon mailing list 
> Xymon at xymon.com <mailto:Xymon at xymon.com> 
> http://lists.xymon.com/mailman/listinfo/xymon
> 

- -- 
 ____*Note: UMDNJ is now Rutgers-Biomedical and Health Sciences*
 || \\UTGERS      |---------------------*O*---------------------
 ||_// Biomedical | Ryan Novosielski - Sr. Systems Programmer
 || \\ and Health | novosirj at rutgers.edu - 973/972.0922 (2x0922)
 ||  \\  Sciences | OIT/EI-Academic Svcs. - ADMC 450, Newark
      `'
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iEYEARECAAYFAlJTCuMACgkQmb+gadEcsb4cMgCcCfVyjPy4rfESWuICxH9SnOwa
rMgAoN6KNebsTooF86E2Oy7uc3VPvpvP
=P+vJ
-----END PGP SIGNATURE-----




More information about the Xymon mailing list