[Xymon] .default. not working?

Jon Dustin jdustin at usm.maine.edu
Sat Apr 21 18:13:27 CEST 2012


Using testip was the whole point, because I wanted to apply that tag to a bunch of hosts. 

I decided to add tags to host entries instead. 

I do not use FQDN, and wondered if that might have something to do with testip. 

 Thanks for the suggestion though!

Please forgive typos - sent from a mobile device

On Apr 21, 2012, at 11:30, "Mark Mulligan <MMulligan at llbean.com>" <MMulligan at llbean.com> wrote:

> Have you tried changing testip to noconn so that it does not try to resolve the IP address?   The example in hosts.cfg does not use a testip.  
> 
> Thanks, 
> Mark 
> 
> -----Original Message-----
> From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Jon Dustin
> Sent: Monday, April 16, 2012 3:23 PM
> Cc: xymon at xymon.com
> Subject: =?utf-8?B?UmU6IFtYeW1vbl0gLmRlZmF1bHQuIG5vdCB3b3JraW5nPw====?> 
> Can anyone think of a way I can debug the processing of hosts.cfg? For some reason my ".default." entry is not being read correctly, and no matter what I try Xymon complains. 
> 
> Thanks for reading. 
> 
> Sent from a mobile device, please excuse any typos.
> 
> 
> -----Original Message-----
> From: Jon Dustin [jdustin at usm.maine.edu]
> Received: Monday, 16 Apr 2012, 8:27
> CC: xymon at xymon.com [xymon at xymon.com]
> Subject: =?utf-8?B?UmU6IFtYeW1vbl0gLmRlZmF1bHQuIG5vdCB3b3JraW5nPw====?> 
> 
> 
>>>> "Jon Dustin" <jdustin at usm.maine.edu> 2012-04-16T08:27:57.783283 >>>
> Nope, still not working:
> 
> 0.0.0.0         .default.               # testip NOPROPRED:+if_load NOPROPYELLOW:+if_load
> 
> (note - there are TABS on both sides of .default. - in case that makes a difference)
> 
> Thanks for reading.
> 
>>>> On 4/16/2012 at 3:08 AM, in message
> <CALMep04wRHCuimkWdDEN868C3-KPyJH5FcwyshAOW-dpQASGOw at mail.gmail.com>, Steven Carr <sjcarr at gmail.com> wrote:
>> Try...
>> 
>> NOPROPRED:+if_load NOPROPYELLOW:+if_load
>> 
>> That's what I have in mine and it works.
>> 
>> Steve
>> 
>> 
>> 
>> On 16 April 2012 03:04, Jon Dustin <jdustin at usm.maine.edu> wrote:
>> 
>>> No, my .default. is all on one line. Very perplexing!
>>> 
>>> --
>>> Jon Dustin - Network Specialist
>>> University of Southern Maine
>>> Portland, ME  207-780-4152
>>> 
>>>>>> Steve Holmes  04/15/12 8:15 PM >>>
>>> Is the .default. really on 3 lines?  If so, that is your problem. Put 
>>> it all on one line.
>>> 
>>> Steve
>>> 
>>> Wherever you go, there you are.
>>> 
>>> On Apr 15, 2012, at 7:06 PM, "Jon Dustin"  wrote:
>>> 
>>>> Greetings -
>>>> 
>>>> I'm currently running Xymon v4.3.7, and having troubles getting the
>>> ".default." entry to work properly. Here is what I have configured:
>>>> 
>>>> page devs Network Devices
>>>> 0.0.0.0         .default.               # testip NOPROPRED:if_load
>>> NOPROPYELLOW:if_load
>>>> (then a bunch of hosts below)
>>>> 
>>>> It seems the .default. entry is ignored (status IS propagated 
>>>> upward),
>>> *and* I see the following error in xymonnet:
>>>> 
>>>> dnsresolve - internal error, name '' not in cache
>>>> xymonnet: Cannot resolve IP for host
>>>> 
>>>> Am I misunderstanding the ".default." entry? Thanks for anything 
>>>> you can
>>> pass along.
>>>> 
> 
> 
> -- 
> 
> Jon Dustin - Network Specialist
> University of Southern Maine
> Portland, ME  207-780-4152
> 
> 
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon




More information about the Xymon mailing list