[Xymon] Devmon on Xymon 4.3.2 - if_load and temp issue for all devmon hosts

Nick Camaldi willowbrookmagic at hotmail.com
Wed May 25 20:39:31 CEST 2011


The plot thickens 
 
i compiled this on production made all modifications
 
moved all my data over and everything works except for if_load and temp. devmon is pulling the data.
 
here are my rrddefinitons for the above.
 
[if_load]
        FNPATTERN if_load.(.*).rrd
        TITLE Network Traffic
        YAXIS Bits/second
        DEF:in at RRDIDX@=@RRDFN@:ds0:AVERAGE
        CDEF:inbytes at RRDIDX@=in at RRDIDX@,8,*
        DEF:out at RRDIDX@=@RRDFN@:ds1:AVERAGE
        CDEF:outbytes at RRDIDX@=out at RRDIDX@,8,*
        LINE1:inbytes at RRDIDX@#@COLOR@:@RRDPARAM@ In
        GPRINT:inbytes at RRDIDX@:LAST: %8.2lf %s (cur)
        GPRINT:inbytes at RRDIDX@:MAX: %8.2lf %s (max)
        GPRINT:inbytes at RRDIDX@:MIN: %8.2lf %s (min)
        GPRINT:inbytes at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n
        LINE1:outbytes at RRDIDX@#@COLOR@:@RRDPARAM@ Out
        GPRINT:outbytes at RRDIDX@:LAST: %8.2lf %s (cur)
        GPRINT:outbytes at RRDIDX@:MAX: %8.2lf %s (max)
        GPRINT:outbytes at RRDIDX@:MIN: %8.2lf %s (avg)
        GPRINT:outbytes at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n
        -l 0

[temp]
        FNPATTERN temp.(.*).rrd
        TITLE Temperature
        YAXIS Degrees Celsius
        DEF:in at RRDIDX@=@RRDFN@:ds0:AVERAGE
        DEF:out at RRDIDX@=@RRDFN@:ds1:AVERAGE
        LINE1:in at RRDIDX@#@COLOR@:@RRDPARAM@ Temperature
        GPRINT:in at RRDIDX@:LAST: %8.2lf %s (cur)
        GPRINT:in at RRDIDX@:MAX: %8.2lf %s (max)
        GPRINT:in at RRDIDX@:MIN: %8.2lf %s (min)
        GPRINT:in at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n
        #LINE1:out at RRDIDX@#@COLOR@:@RRDPARAM@ Threshold
        #GPRINT:out at RRDIDX@:LAST: %8.2lf %s (cur)
        #GPRINT:out at RRDIDX@:MAX: %8.2lf %s (max)
        #GPRINT:out at RRDIDX@:MIN: %8.2lf %s (avg)
        #GPRINT:out at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n
        -l 0

 
> From: bgmilne at staff.telkomsa.net
> To: willowbrookmagic at hotmail.com
> Subject: Re: [Xymon] Devmon on Xymon 4.3.2 - if_load and temp issue for all devmon hosts
> Date: Wed, 25 May 2011 16:02:45 +0200
> 
> On Wednesday, 25 May 2011 15:24:27 Nick Camaldi wrote:
> > RRD files for If_load and temp for all devmon hosts are not working it
> > shows a red x
> 
> So the graph definition was not available in your new Xymon configuration.
> 
> > and not updating i try and remove rrd files for a host and it doesn't
> > re-create.
> 
> No need to remove them ...
> 
> For this one, most likely your TEST2RRD does not contain the correct 
> 'if_load=devmon' and 'temp=devmon' values, although these are defaults?
> 
> Regards,
> Buchan
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20110525/e2465c02/attachment.html>


More information about the Xymon mailing list