[Xymon] Need help understanding bbwin settings behavior

Rob Munsch Munsch at phillycarshare.org
Tue Jun 14 19:57:18 CEST 2011


I believe the meaning is "If you have a DEFAULT section, it must be at the bottom, because it will not be overwritten by later directives and will take precedence over anything you put after it."


________________________________

	From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel
	Sent: Tuesday, June 14, 2011 1:27 PM
	To: xymon at xymon.com
	Subject: Re: [Xymon] Need help understanding bbwin settings behavior
	
	

	I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine...

	

	

	From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Johan Sjöberg
	Sent: Tuesday, June 14, 2011 10:28 AM
	To: Michael Baydoun; xymon at xymon.com
	Subject: Re: [Xymon] Need help understanding bbwin settings behavior

	

	Hi.

	

	The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.

	

	/Johan

	

	From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun
	Sent: den 14 juni 2011 16:21
	To: xymon at xymon.com
	Subject: [Xymon] Need help understanding bbwin settings behavior

	

	I have some questions on bbwin configuration.  
	
	from bbwin.cfg
	<setting name="mode" value="central" />
	<setting name="configclass" value="win32" />
	
	In the disk section
	<setting name="default" warnlevel="85%" paniclevel="95%" />
	
	from hobbit-clients.cfg
	DEFAULT
	        # These are the built-in defaults.
	        CLOCK   1200
	        DISK    * 90 95
	        UP      30m
	
	CLASS=win32
	        DISK C 50 55 # Can be harddrive or mount points
	        DISK D 50 55 # Can be harddrive or mount points
	
	HOST=foo
	        DISK V 101 101
	        DISK W 101 101
	
	I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green.  However, that is not happening.  All of the drives are going yellow at 90% and red at 95% which matches default.  What am I doing wrong?
	
	
	


________________________________

	This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
	
	This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
	
	If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20110614/2e5fda97/attachment.html>


More information about the Xymon mailing list