Fwd: Fwd: [xymon] msgs : always green instead of configuring for errors

akshar bhosale akshar.bhosale at gmail.com
Wed Feb 16 06:12:17 CET 2011


Hi,

after changing the settings, same issue is coming. i ama getting those
messages inside msgs tab but color is always remains green.
kindly help me.

-akshar

---------- Forwarded message ----------
From: Dominique Frise <dominique.frise at unil.ch>
Date: Mon, Feb 14, 2011 at 6:46 PM
Subject: Re: Fwd: [xymon] msgs : always green instead of configuring for
errors
To: xymon at xymon.com


On 02/14/11 01:43 PM, akshar bhosale wrote:

> Hi,
>      Thank you for pointing the mistake; but even after changing the
> setting, it is not working. Here are my changed settings in
> hobbit-clients.cfg
> Hosts are host1.abc.pqr.xyz----host50.abc.pqr.xyz
> HOST=%.*.abc.pqr.xyz
> LOG /var/log/messages lockup COLOR=red
>
> DEFAULT
>         # These are the built-in defaults.
>         UP      1h
>         LOAD    18.0 20.0
>         DISK    * 90 95
>         MEMPHYS 100 101
>         MEMSWAP 50 80
>         MEMACT  90 97
>
> Even after restarting server and client, it is showing the same behaviour.
> Kindly let me know i
>
> -akshar
> ---------- Forwarded message ----------
> From: *pankaj dorlikar* <pankaj.dorlikar at gmail.com
> <mailto:pankaj.dorlikar at gmail.com>>
> Date: Mon, Feb 14, 2011 at 6:05 PM
> Subject: Re: [xymon] msgs : always green instead of configuring for errors
> To: akshar.bhosale at gmail.com <mailto:akshar.bhosale at gmail.com>
>
>
> On Mon, Feb 14, 2011 at 12:00 PM, Henrik Størner <henrik at hswn.dk
> <mailto:henrik at hswn.dk>> wrote:
>
>    In <AANLkTikfYsvxA4dTTgTVrhQCFGG-vMQOAZ8XbvJHc_57 at mail.gmail.com
>    <mailto:AANLkTikfYsvxA4dTTgTVrhQCFGG-vMQOAZ8XbvJHc_57 at mail.gmail.com>>
>
>    akshar bhosale <akshar.bhosale at gmail.com
>    <mailto:akshar.bhosale at gmail.com>> writes:
>
>     >i am using xymon 4.2.2. I want that each client should show msgs
>    red if
>     >lockup word comes in /var/log/messages.
>
>     >~xymon/server/etc/hobbit-clients.cfg
>     >DEFAULT
>     >        # These are the built-in defaults.
>     >        UP      1h
>     >        LOAD    18.0 20.0
>     >        DISK    * 90 95
>     >        MEMPHYS 100 101
>     >        MEMSWAP 50 80
>     >        MEMACT  90 97
>     >        PROC cron
>     >        PROC /opt/PBS/bin/myscript.sh
>     >        LOG /var/log/messages lockup COLOR=red
>
>    You should Never, Ever, put PROC and LOG settings in the
>    DEFAULT section.
>
>    Move them into a "HOST=*" section, before the DEFAULT one.
>
>
>    Regards,
>    Henrik
>
>
>    To unsubscribe from the xymon list, send an e-mail to
>    xymon-unsubscribe at xymon.com <mailto:xymon-unsubscribe at xymon.com>
>
>  You may want to try:

LOG /var/log/messages  %(?-i)lockup COLOR=red



>From hobbit-clients.cfg(5):
...
                                        Note that Xymon defaults
    to  case-insensitive  pattern  matching; if that is not what
    you want, put  "(?-i)"  between  the  "%"  and  the  regular
    expression to turn this off. E.g. "%(?-i)WARNING" will match
    the word WARNING only when it is upper-case.
...

Dominique


To unsubscribe from the xymon list, send an e-mail to
xymon-unsubscribe at xymon.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20110216/bbe36521/attachment.html>


More information about the Xymon mailing list