[hobbit] PDF Reports

[wiskbroom at hotmail.com]

Sorry, don't mean to be a pest, but I'd like to get my PDF's working :-)

Bottom line, I can generate PDF reports, but they do not contain charts.  

I am only able to see a pie chart for "24x7 Availability" with the word "Tests" in a box and the words "09-Mar-2010 availability : %" above the pie chart.

The pie chart is just a solid green circle, with a line from the center to the 12 o'clock position.

None of the other charts are displayed, I am getting "No graph" for these.

Any help would be greatly appreciated, thank you.

.vp

>
> Even more errors:
>
> 2010-03-08 16:38:36 xgetenv: Cannot find value for variable BBREPGREEN
> 2010-03-08 16:39:23 Whoops ! bb failed to send message - timeout
> 2010-03-08 16:39:23 hobbitd status-board not available, code 7
>
> Can anyone help?  Please &^)
>
>> All;
>>
>> Further testing, by running in this manner:
>>
>> source config
>> echo $HOBBITREP
>> sh $HOBBITREP/scripts/gencsv.sh
>>
>> Results in the following errors; not sure if they are my problem:
>>
>> 2010-03-08 14:56:33 xgetenv: Cannot find value for variable BBREPGREEN
>>
>> I am unable to find any variable using BBREPGREEN anywhere.
>>
>> These seem to happen for every node CSV's are created for.
>>
>> Thank you,
>>
>>
>> .vadim
>>
>>
>>>
>>> Hi Chris;
>>>
>>> perhaps you can elaborate? I get PDF reports partially working, here are some issues that I've encountered:
>>>
>>> 1. I can pull up a report, but the report contains only the page structure.
>>>
>>> 2. Often, subsequent attempts after my initial report often fail, almost as if I am only able to create but one. (again, just a page structure).
>>>
>>> 3. Attempts to run master.sh seem to hang forever (I have less than 50 hosts), here is what I am seeing after running for more than two hours:
>>>
>>> [scripts]# sh -x ./master.sh
>>> + source config
>>> ++ HOBBITBIN=/xymon/server
>>> ++ HOBBITREP=/xymon/server/www/pdf
>>> ++ RRDREP=/xymon/rrd
>>> ++ RRDGRAPHS=/xymon/server/www/pdf/graphrrd
>>> ++ RRDNEW=N
>>> ++ RRDBIN=/usr/bin/rrdtool
>>> + sh /xymon/linux/www/pdf/scripts/rrdcputil.sh
>>> + sh /xymon/linux/www/pdf/scripts/rrdload.sh
>>> + sh /xymon/linux/www/pdf/scripts/rrdmemory.sh
>>> + sh /xymon/linux/www/pdf/scripts/rrdnetio.sh
>>> + sh /xymon/linux/www/pdf/scripts/rrdwio.sh
>>> + sh /xymon/linux/www/pdf/scripts/rrdrq.sh
>>> + sh /xymon/linux/www/pdf/scripts/gencsv.sh
>>>
>>>
>>> 4. When I select report.php, I am unable to see graphs for anything except for 24x7 Availability with the word "Tests" in a box and a large all green pie-chart, the chart says "Week 9 availability: %".
>>>
>>> 5. When I select analysis report I can see what I've entered for conclusion, but graphs for nothing else.
>>>
>>> 6. My main view page, bb.html, goes to a green/broken image one, then after a minute gets fixed, but goes back and forth to the broken (images seem to be broken) green background bb.html page.
>>>
>>> NOTE: I am using RRDtool 1.4.2, and I've entered No for RRDNEW, but the same happens if I use Yes.
>>>
>>> Any help in debugging this would be greatly appreciated.
>>>
>>> Thanks all!
>>>
>>> .vadim
>>>
>>>
>>>> Subject: RE: [hobbit] PDF Reports
>>>>
>>>> Yes, I have PDF Reports working and sar graphs.
>>>>
>>>> It took a little collaboration with Thomas to get there.
>>>>
>>>> Original problem was with a PHP config paramater relating to
>>>> short_open_tag
>>>>
>>>> Using SERVER_SOFTWARE="Apache/2.2.2 (Unix) PHP/5.1.4"
>>>>
>>>> Regards,
>>>> Chris
>>>>
>>>> -----Original Message-----
>>>> From: Jacobs, Eric [mailto:ejacobs at thomaspublishing.com]
>>>> Sent: 05 March 2010 22:09
>>>> To: hobbit at hswn.dk
>>>> Subject: [hobbit] PDF Reports
>>>>
>>>> Has anyone tried to get the PDF Reports add-in from XYMONTON working.
>>>> I've been trying and am not having much luck. (I'm suspecting it may
>>>> have something to do with version of PHP I installed). I also tried
>>>> getting the bb-sar.sh working. That works, sort-of. I get the reports
>>>> but not any of the graphs (Thomas Seglard, in his writeup about PDF
>>>> Reports, has instructions). Anyone have sar graphs working?
>>>>
>>>> Eric Jacobs