[xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Lapuz, Ryan Jay ryanjay.lapuz at tsdp.toshiba.co.jp
Wed Jul 21 04:44:39 CEST 2010


Hi Josh,

 

I did modify hobbitclient-linux.sh as you instructed but I think there's
no change as I tried it manually.

 

[xymon at xymon ~]$ cat /etc/redhat-release

CentOS release 5.4 (Final)

[xymon at xymon ~]$

[xymon at xymon ~]$ uptime

10:40:28 up 1 day, 41 min,  4 users,  load average: 0.02, 0.04, 0.00

[xymon at xymon ~]$

[xymon at xymon ~]$ uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

10:40:42 up 1 day, 41 min,  4 users,  load average: 0.01, 0.04, 0.00

[xymon at xymon ~]$

[xymon at xymon ~]$ echo `uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"`

10:40:53 up 1 day, 41 min, 4 users, load average: 0.01, 0.04, 0.00

 

Thanks and regards,

Ryan

 

From: Josh Luthman [mailto:josh at imaginenetworksllc.com] 
Sent: Friday, July 16, 2010 12:50 AM
To: xymon at xymon.com
Cc: Lapuz, Ryan Jay
Subject: Re: [xymon] RE: [hobbit] Re: rrd history chart disappears under
conn, memory and disk after 24 hours

 

[root at bender ~]# cat /etc/redhat-release
CentOS release 5.2 (Final)
[root at bender ~]# uptime
 12:48:33 up 39 days, 22:20,  3 users,  load average: 0.00, 0.07, 0.13
[root at bender ~]# uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"
 12:48:37 up 39 days, 22:20,  3 users,  load average: 0.00, 0.07, 0.13
[root at bender ~]# echo `uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"`
12:49:10 up 39 days, 22:20, 3 users, load average: 0.00, 0.06, 0.12

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373



On Thu, Jul 15, 2010 at 12:44 PM, Brand, Thomas R. <TRBrand at cvs.com>
wrote:

Ryan,

 

 I don't have a CentOS system to test on.  

 

I would expect CentOS to use the  hobbitclient-linux.sh script too, so
the fix described below should work for you too.

 

On the client, edit hobbitclient-linux.sh and change:


echo "[uptime]"

uptime 

 

To 

 

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

 

 

 

 

Tom Brand

Disclaimer:  1) all opinions are my own, 2) I may be completely wrong,
3) my advice is worth at least as much as what you are paying for it, or
your money cheerfully refunded.

________________________________

From: Lapuz, Ryan Jay [mailto:ryanjay.lapuz at tsdp.toshiba.co.jp] 
Sent: Wednesday, July 14, 2010 9:31 PM
To: xymon at xymon.com
Subject: [xymon] RE: [hobbit] Re: rrd history chart disappears under
conn, memory and disk after 24 hours

 

Hi Thomas,

Good day!

I am having the same issue, but the problem is that it is my Xymon
server that is installed on CentOS that is displaying 'day' instead of
'days' when executing uptime command.

So all my clients' graph are not displaying after the time that you
specified on your email.

Can you help me on how to solve this problem?

Thanks in advance.

Best regards,

Ryan

 

From: Brand, Thomas R. [mailto:TRBrand at cvs.com] 
Sent: Thursday, February 04, 2010 1:55 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Re: rrd history chart disappears under conn,
memory and disk after 24 hours

 

I had similar symptoms a while back running Xymon on SLES 10.1 (SuSE
Linux).

The rrd graphs would display data for hours 0-24 after a reboot, no data
for hours 24-48,

and then be fine again for hours 48+.

 

 

I determined that, when running under SLES, the uptime command returns
the string:

'day'   for uptime >= 24 hours && <48 hours; eg, 1 day

'days' for uptime >= 48 hours; eg 3 days

 

On the Xymon server, it appears the software is only looking for the
string 'days'.

 

I modified the [uptime] section in
~hobbit/client/bin/hobbitclient-linux.sh and added a perl 

command to change ' day ' to  ' days '.

 

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

 

 

 

Tom Brand

Disclaimer:  1) all opinions are my own, 2) I may be completely wrong,
3) my advice is worth at least as much as what you are paying for it, or
your money cheerfully refunded.

________________________________

From: White, Bruce [mailto:bewhite at fellowes.com] 
Sent: Wednesday, February 03, 2010 11:42 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Re: rrd history chart disappears under conn,
memory and disk after 24 hours

 

I have been running two Xymon- 4.3.0-0.beta2 running on  RedHat AS 5.2
servers for over three months and hive not seen anything like you
describe on either server.

 

     .......Bruce 

 

 

 Bruce White

 Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax:
630-893-1648 | bewhite at fellowes.com | www.fellowes.com
<http://www.fellowes.com/> 

 

  

 

Disclaimer: The information contained in this message may be privileged
and confidential and protected from disclosure. If the reader of this
message is not the intended recipient or an employee or agent
responsible for delivering this message to the intended recipient, you
are hereby notified that any dissemination, distribution or copying of
this communication is strictly prohibited. If you have received this
communication in error, please notify us immediately by replying to the
message and deleting it from your computer. Thank you. Fellowes, Inc.

 

________________________________

From: ZHONGYU CHEN [mailto:w17682 at motorola.com] 
Sent: Wednesday, February 03, 2010 7:41 AM
To: hobbit at hswn.dk
Subject: [hobbit] Re: rrd history chart disappears under conn, memory
and disk after 24 hours

 

Hi,

I switch to version 4.2.3 and I haven't see the same issue.

Thanks.

On Sun, Jan 24, 2010 at 10:45 PM, ZHONGYU CHEN <w17682 at motorola.com>
wrote:

Hi,

I installed and configured xymon-4.3.0-beta2. Everything looks fine. But
there is one strange thing beyond my understood. The rrd history chart
disappears under tests/columns of conn, disk and memory after running 24
hours. But I can see these charts under column trends. No time effect to
the tests/columns of cpu and my custom tests. These rrd charts will stay
there as far as time goes.

If I add a new client, I can see these rrd charts under conn, disk and
memory during the first 24 hours (or the first day).

Anyone sees the same phenomenon?  Did I miss something in configuration?

Thank you in advance.

-- 
Zhongyu Chen

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20100721/7905a072/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3463 bytes
Desc: image001.jpg
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20100721/7905a072/attachment.jpg>


More information about the Xymon mailing list