[hobbit] monitoring Solaris client

Ambati Srinivas am.srini at gmail.com
Wed Dec 9 12:45:26 CET 2009


> Hi Martin,
>
> ~hobbit/client/logs/hobbitclient.log file have below log entries and no
> other.
>
> -bash-3.00$ less hobbitclient.log
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
> Killed
> ld.so.1: hobbitd_client: fatal: libpcre.so.0: open failed: No such file or
> direc
> tory
>
> I did get a successful tenet to server from client as shown below:
>
> -bash-3.00$ telnet xxx.xxx.xx.xx9 1984
> Trying xxx.xxx.xx.xx9...
> Connected to xxx.xxx.xx.xx9.
> Escape character is '^]'.
> Connection to xxx.xxx.xx.xx9 closed by foreign host.
> -bash-3.00$
>
>
> Please advice.
>
> Thanks,
>
> Srini
>
>
>
>
> On Tue, Dec 8, 2009 at 8:21 PM, Ward, Martin <Martin.Ward at colt.net> wrote:
>
>>  Srinu,
>>
>>
>>
>> The fact that you cannot see any disk, memory or other information points
>> to the fact that the client Xymon program is not running, or is talking to
>> your server on a different IP address.
>>
>>
>>
>> Bring up the Xymon web page and look at the Ghost Clients report page. Is
>> your client listed there? Maybe under a different IP address?
>>
>>
>>
>> If you cannot see anything useful in this page then login to the client
>> and change to the ~hobbit/client/logs directory. Look in the
>> hobbitclient.log file for connectivity issues. Also, whilst on the client
>> try connecting to the Xymon server on port 1984 like so:
>>
>> $ telnet xymon.server.ip.address 1984
>>
>>
>>
>> You should get a "connected" notice. If you don't then there is a
>> firewall/network/routing issue between the two boxes.
>>
>>
>>
>> |\/|artin
>>
>>
>>
>> *From:* Ambati Srinivas [mailto:am.srini at gmail.com]
>> *Sent:* 08 December 2009 11:47
>> *To:* hobbit at hswn.dk
>> *Subject:* [hobbit] monitoring solaris client
>>
>>
>>
>> Hi,
>>
>> I just installed  on a solaris box (SunOS pluto 5.10 Generic_120011-14
>> sun4u sparc SUNW,Ultra-250), I have edited ~/etc/hobbitclient.cfg and given
>> xymon server IP and on Xymon server ~/server/etc/bb-hosts and added this sun
>> box ip address and hostname.
>>
>>  I can only see conn, info, trends data. others such as cpu, disk, memory,
>> msgs are all empty. Am I missing something basic here or any config changes
>> I had to take care.
>>
>> bash-3.00# MAKE=gmake ./configure.client
>>
>> Configuration script for Hobbit client
>>
>> This script asks a few questions and builds a Makefile to compile Hobbit
>>
>> Checking your make-utility
>>
>> Hobbit normally keeps all of the client configuration files
>> on the Hobbit server. If you prefer, it is possible to use
>> a local client configuration file instead - if so, answer
>> 'client' to the next question.
>> NB: Local configuration requires the PCRE libs on each host.
>>
>> Server side client configuration, or client side [server] ?
>> client
>>
>> Checking for the PCRE libraries
>> Checking for PCRE ...
>> Found PCRE include files in /opt/sfw/include
>> Found PCRE libraries in /opt/sfw/lib
>>
>>
>> Checking for Large File Support ...
>> ERROR: LFS support check failed for standard file support
>>
>>
>> What userid will be running Hobbit [hobbit] ?
>> xymon
>>
>> Found passwd entry for user xymon:x:60040:1::/export/home/xymon:/bin/bash
>>
>>
>> Where do you want the Hobbit installation [/export/home/xymon] ?
>>
>> OK, will configure to use /export/home/xymon as the Hobbit toplevel
>> directory
>>
>>
>> What is the IP-address of your Hobbit server [127.0.0.1] ?
>> xxx.xxx.xx.x6
>>
>>
>>
>> Using SunOS Makefile settings
>>
>>
>>
>> Created Makefile with the necessary information to build Hobbit
>> Some defaults are used, so do look at the Makefile before continuing.
>>
>> Configuration complete - now run gmake (GNU make) to build the tools
>> bash-3.00#
>>
>>
>>
>> bash-3.00# gmake
>> bash-3.00# gmake install
>>
>>
>> bash-3.00# vi etc/hobbitclient.cfg
>> "etc/hobbitclient.cfg" 52 lines, 1690 characters
>> # Environment settings for the Hobbit client.
>>
>> BBDISP="xxx.xxx.xx.xx9"             # IP address of the Hobbit server
>>
>>
>> bash-3.00# ./runclient.sh start
>> Hobbit client for sunos started on pluto
>>
>>
>> -bash-3.00# vi /export/home/xymon/server/etc/bb-hosts
>> xxx.xxx.xx.x6   APT-NCC-NSW-rhoSpluto
>>
>>
>> Let me know what all other information I can provide.
>>
>> Thanks all for your help,
>>
>> Srinu
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20091209/434d0a8e/attachment.html>


More information about the Xymon mailing list