[hobbit] No SNMP data for devmon template
Dan.McDonald at austinenergy.com
Wed Sep 10 14:58:57 CEST 2008
On Tue, 2008-09-09 at 21:44 -0400, Martha McConaghy wrote:
> I've been beating my head against a wall on this and finally admit I don't
> have a clue why it is not working. We're just getting started with Hobbit,
> but plan on making it our main monitoring solution. I've got devmon
> running with it and have been able to monitor the devices that already have
> templates. However, some of our devices don't have templates, so I'm trying
> to define one for them (Weather Goose environmental monitors).
I monitor these with mrtg and use bbmrtg to drop the status into hobbit.
I have about 70 of them.
> To start, I'm just trying to define a simple temperature test. I can
> see that devmon is reading the files and all seems to be OK. However,
> I get the dreaded "No SNMP data found for upsenvTempwx on ..." and the
> test does not work. I can do an snmpget on the same oid and it returns
> data with no problem.
> upsEnvTempwx : .18.104.22.168.4.1.17322.214.171.124.5 : leaf
it depends when version of code you are running on the weathergoose. in
a few versions, when you poll that oid, it responds with an OID/Instance
pair. snmpget doesn't seem to care. But SNMP_Tools.pm throws a fit
when the request doesn't match the response.
You might try .126.96.36.199.4.1.173188.8.131.52.5.1 instead.
Note that the watchdog reports degrees C, not F.
> upsEnvTempwx : red : 105 : Temperature is very high
> upsEnvTempwx : yellow : 99 : Temperature is high
Daniel J McDonald, CCIE #2495, CISSP #78281, CNX
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 197 bytes
Desc: This is a digitally signed message part
More information about the Xymon