[hobbit] Disk test display feature request

Joshua Krause forums at triadbiz.rr.com
Mon Jun 23 13:55:49 CEST 2008


All I did was modified the hobbitclient-linux.sh file for my linux boxes and
you will see an entry for df -Pl and I changed it to df -Ph and my graphs
and page show human readable.

-Josh

-----Original Message-----
From: Everett, Vernon [mailto:Vernon.Everett at woodside.com.au] 
Sent: Friday, June 20, 2008 12:16 AM
To: hobbit at hswn.dk
Subject: [hobbit] Disk test display feature request

Hi Henrik

A feature request for you.

Most unix-like operating systems now support the -h switch on the df
command.
I am sure I do not need to tell you, -h displays the output in human
readable format.

Example
# df -h
Filesystem                      size   used  avail capacity  Mounted on
/dev/vx/dsk/bootdg/rootvol      7.9G   3.3G   4.5G    43%    /
swap                   		  7.9G   1.4M   7.9G     1%
/etc/svc/volatile
/dev/vx/dsk/bootdg/var          7.9G   4.5G   3.3G    58%    /var
/dev/vx/dsk/bootdg/opt          7.9G   1.7G   6.1G    22%    /opt
/dev/vx/dsk/int/vol0            190G   147G    40G    79%
/local/dsk/vol0
/dev/vx/dsk/6540b/dsu3          7.3T   4.6T   2.6T    64%
/local/dsk/dsu3
/dev/vx/dsk/6540b/dsu4          7.3T   5.2T   2.1T    72%
/local/dsk/dsu4

Not so good if you want to do calculations, but far more readable
compared to  

# df -k
Filesystem            kbytes    used   avail capacity  Mounted on
/dev/vx/dsk/bootdg/rootvol   8262869 3448657 4731584    43%    /
swap                         8091848    1464 8090384     1%
/etc/svc/volatile
/dev/vx/dsk/bootdg/var       8262869 4713464 3466777    58%    /var
/dev/vx/dsk/bootdg/opt       8262869 1777713 6402528    22%    /opt
/dev/vx/dsk/int/vol0         199229440 153301977 43058152    79%
/local/dsk/vol0
/dev/vx/dsk/6540b/dsu3       7803789312 4968049472 2813588504    64%
/local/dsk/dsu3
/dev/vx/dsk/6540b/dsu4       7803789312 5579034264 2207423576    72%
/local/dsk/dsu4

Is it possible to have the calculations and graphs based on the standard
df -k output, but have the display use df -h?

It might require 2 iterations of the df command at client level, one for
display, and another for data.
I was thinking, maybe even add another definition in the client configs.
DF_DISP="df -h", which would then allow any switches to be added,
depending on preference.

I have tried changing the DF= command definition to df -h in the config,
but that seems to break some of the calculations at server side.

Regards
    Vernon



NOTICE: This email and any attachments are confidential. 
They may contain legally privileged information or 
copyright material. You must not read, copy, use or 
disclose them without authorisation. If you are not an 
intended recipient, please contact us at once by return 
email and then delete both messages and all attachments.


To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk



More information about the Xymon mailing list