[hobbit] No graph for negative clock offset

Ralph Mitchell ralphmitchell at gmail.com
Mon Jul 28 17:18:21 CEST 2008


Judging by the man page, negative values are OK.  The first entry in the
EXAMPLE section of "man rrdcreate" reads:

          rrdtool create temperature.rrd --step 300 \
             DS:temp:GAUGE:600:-273:5000 \
             RRA:AVERAGE:0.5:1:1200 \
             RRA:MIN:0.5:12:2400 \
             RRA:MAX:0.5:12:2400 \
             RRA:AVERAGE:0.5:12:2400

         This sets up an RRD called temperature.rrd which accepts one
tempera-
         ture value every 300 seconds. If no new data is supplied for more
than
         600 seconds, the temperature becomes *UNKNOWN*.  The minimum
acceptable
         value is -273 and the maximum is 5'000.

Ralph Mitchell


On Mon, Jul 28, 2008 at 9:24 AM, Ward, Martin <Martin.Ward at colt.net> wrote:

> Funnily enough I am looking at the Hobbit code that deals with RRD data
> at the moment. If you are using the NCV capabilities then it looks like
> you can't have negative numbers. The generic NCV (Number, Colon, Value)
> code looks for numbers only, no signs (somewhere near line 70 in
> hobbitd/rrd/do_ncv.c):
>
>                        val = l + strspn(l, " \t");
>                        l = val + strspn(val, "0123456789.");
>
> I have no idea if RRD is able to accept/store negative values, but if it
> is, it should be a simple case of adding the + and - characters to the
> last line listed above to make what you want possible.
>
> |\/|artin
>
> -----Original Message-----
> From: David Stuffle [mailto:david at stufflemail.com]
> Sent: 28 July 2008 14:28
> To: hobbit at hswn.dk
> Subject: [hobbit] No graph for negative clock offset
>
>
> Hi all,
> None of my clock offset graphs graph anything when the clock offset from
>
> a host is a negative number.  Only positive number work.  Anyone having
> the same thing happen or know how to fix?
>
> I'm running a snapshot 4.3.0-0.20080103
>
> Thanks
> David
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>
>
>
> *************************************************************************************
> The message is intended for the named addressee only and may not be
> disclosed to or used by anyone else, nor may it be copied in any way.
>
> The contents of this message and its attachments are confidential and may
> also be subject to legal privilege.  If you are not the named addressee
> and/or have received this message in error, please advise us by e-mailing
> security at colt.net and delete the message and any attachments without
> retaining any copies.
>
> Internet communications are not secure and COLT does not accept
> responsibility for this message, its contents nor responsibility for any
> viruses.
>
> No contracts can be created or varied on behalf of COLT Telecommunications,
> its subsidiaries or affiliates ("COLT") and any other party by email
> Communications unless expressly agreed in writing with such other party.
>
> Please note that incoming emails will be automatically scanned to eliminate
> potential viruses and unsolicited promotional emails. For more information
> refer to www.colt.net or contact us on +44(0)20 7390 3900.
>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20080728/b0a153a5/attachment.html>


More information about the Xymon mailing list