[hobbit] bb-prtdiag.sh

[Mike Rowell]

Josh,
 
I believe there is a read me or maybe it's in the comments of the file but there are some entries that need to be added to I believe hobbitclient.cfg which are some of the bits that are saying not defined in etc/bbsys.local, I'm at home at the moment, but I'll take a look at our bb-prtdiag.sh script tommorow and see what we reset to get it working properly in hobbit.
 
regards,
 
Mike

________________________________

From: Joshua Krause [mailto:forums at triadbiz.rr.com]
Sent: Mon 07/01/2008 22:08
To: hobbit at hswn.dk
Subject: [hobbit] bb-prtdiag.sh



I am trying to get the bb-prtdiag.sh script to work on a couple of Solaris boxes and didn't know if I could get some help from someone in the forum that has it up and running.  Currently I am trying to get it to run on a V880 and I am getting this error in the log file:

 

-bash-3.00$ more bb-prtdiag.log

awk: syntax error near line 1

awk: bailing out near line 1

 

and on the hobbit page I am seeing this:

 

UNAME command is not defined in etc/bbsys.local - using default: /sbin/uname

 

 yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif>  PLATFORM_SPEC command is not defined in etc/bbsys.local - using default: SUNW,Sun-Fire-880

 

 yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif>  PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using default: /usr/platform/SUNW,Sun-Fire-880/sbin/prtdiag

 

 yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif>  PRTDIAG_OPT command is not defined in etc/bbsys.local - using default: -v

 

 yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif>  EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using default: Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000

 

 yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif>  PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local - using default: No failures|Most recent AC Power Failure|Minimum Available|CS Fail|No Hardware failures|^===|currently no Boards|Fault     Fan

 

 yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif>  PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local - using default: No Recent System Faults found|No System Faults found|Fault Value|Fault LED|NO_FAULT|Power  Fault|Status        Fault|Fault           off

 

 

And I don't believe I have a program called "fjprtdiag"  and it looks to be a necessary component.

 

Thanks,

 

Josh


________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs service.


________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs service. 
________________________________________________________________________