[hobbit] Migrate hobbit data
Vernon.Everett at woodside.com.au
Tue Aug 5 14:36:17 CEST 2008
Yes, but with a caveat.
If you change architecture, your rrd files might not survive.
If you go like for like e.g. x86 to x86, you should be fine.
However, you will have problems if you migrate from X86 to Sparc, or
There is a workaround, but I would rather have my head set on fire, and
put out with a sledghammer.
If you are going to the same OS, and the same hardware, then it's full
steam ahead, and f*** the icebergs.
Make sure your new server has all the prerequisites for Hobbit
Install Hobbit. Check it starts, then shut it down.
Now simply shut down the old Hobbit installation, copy the data and
config files, and start up the new one.
Your data will include ~/server/etc
Don't forget any custom scripts in ~server/ext
Make sure the clients are pointing to the new server.
The easiest way is to change the IP address of the new server to look
like the old.
Failing that, change DNS or host lookup to point ot the new server.
You should then be back in business.
From: T.J. Yang [mailto:tj_yang at hotmail.com]
Sent: Tuesday, 5 August 2008 7:15 PM
To: hobbit at hswn.dk
Subject: Re: [hobbit] Migrate hobbit data
a very good entry for FAQ or HOWTO if it is not already in hobbitmon
From: Roberts, James <mailto:James.Roberts at hants.gov.uk>
Sent: Tuesday, August 05, 2008 6:00 AM
To: hobbit at hswn.dk
Subject: [hobbit] Migrate hobbit data
I am planning to move my hobbit server install to a new server...
If it possible to migrate all the data from the old install to the new
IT Consultant - IT Services
Hampshire County Council
Room 415,Elizabeth II Court, The Castle,
Winchester, Hants SO23 8US
Internal HPSN: (200) 5037
Tel: +44 (0)1962 845037
Fax: +44 (0)1962 847434
james.roberts at hants.gov.uk
Web: WWW.Hants.Gov.UK <file://WWW.Hants.Gov.UK>
NOTICE: This email and any attachments are confidential.
They may contain legally privileged information or
copyright material. You must not read, copy, use or
disclose them without authorisation. If you are not an
intended recipient, please contact us at once by return
email and then delete both messages and all attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Xymon