bb-prtdiag and temperature.sh question.

McGraw, Robert P. rmcgraw at purdue.edu
Tue Jan 24 16:29:50 CET 2006


Richard,

Thanks for your reply. 

When I think I understand how hobbit works, I seem to get confused again.

I see the modifications you suggest in hobbitclient.cfg and bb-prtdiag. No
problem in making these. 

I am confused where to set it to execute.

Let me see if I got how hobbit works on the client.

1) Hobbitlaunch reads the clientlaunch.cfg file.

2) Clientlaunch.cfg file reads hobbitclient.cfg file and executes
hobbitclient.sh

3) hobbitclient.sh calls hobbitclient-sunos.sh (in my case) which executes
the programs in hobbitclient-sunos.sh and writes the output to msg.txt.

4 hobbitclient.sh sends msg.txt to the $BBDISP.

Now I want to execute the bb-prtdiag and bb-prtdiag seems to send the data
to $BBDISP inside the script. 

Do I put the execution of $BBDISP in clientlaunch.cfg?

What do I need to do on the server side for this to show up in the hobbit
html?

Thanks

Robert

       
________________________________________
From: Deal, Richard [mailto:rdeal at tigr.ORG] 
Sent: Tuesday, January 24, 2006 8:48 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Repeat entries in bb-hosts

I didn’t have to modify bb-prtdiag at all to get it running under the hobbit
client.
You will have to modify the etc/hobbitclient.cfg file to represent your
environment and the bb-prtdiag modifications should also be added.
I have these lines added to hobbitclient.cfg:
(might be some line modification by email but you get the idea)
#
#from prtdiag script
#
UNAME="/sbin/uname"
#PLATFORM_SPEC=`${UNAME} -i`
#PRTDIAG_COMMAND="/usr/platform/${PLATFORM_SPEC}/sbin/prtdiag"
PRTDIAG_OPT="-v"
ZONENAME=/usr/bin/zonename
#Systems that don't support temperature checks
EXCLUDE_SYSTEMS="Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80
UltraAX-i
2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2
Ultra-Enterprise-10000"
PRTDIAG_IGNORE_ERRORS="No failures|Most recent AC Power Failure|Minimum
Availabl
e|CS Fail|No Hardware failures|^===|currently no Boards|Fault     Fan"
PRTDIAG_IGNORE_FAULTS="No Recent System Faults found|No System Faults
found|Faul
t Value|Fault LED|NO_FAULT|Power  Fault|Status        Fault|Fault          
off"
LOM_COMMAND="/usr/sbin/lom"
LOM_OPT="-pfvt"

Woops there is one slight modification to the bb-prtdiag script.  Since
hobbitclient.cfg does not allow for execution, just variable setting, I had
to uncomment these two lines in bb-prtdiag:
PLATFORM_SPEC=`$UNAME -i`
PRTDIAG_COMMAND="/usr/platform/$PLATFORM_SPEC/sbin/prtdiag"



________________________________________
From: McGraw, Robert P. [mailto:rmcgraw at purdue.edu] 
Sent: Tuesday, January 24, 2006 8:34 AM
To: hobbit at hswn.dk
Subject: RE: [hobbit] Repeat entries in bb-hosts



Has anyone rewritten the solaris temperature.sh and bb-prtdiag for hobbit? I
would like to get these going on and just did not want to redo work that has
already been done.

Thanks

Robert




_____________________________________________________________________
Robert P. McGraw, Jr.
Manager, Computer System                                         EMAIL:
rmcgraw at purdue.edu
Purdue University                                                         
ROOM: MATH-807
Department of Mathematics                                        PHONE:
(765) 494-6055
150 N. University Street                                                 
FAX: (419) 821-0540
West Lafayette, IN 47907-2067             
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3051 bytes
Desc: not available
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20060124/a019ae56/attachment.bin>


More information about the Xymon mailing list