Re: FW: [hobbit] TS - Adding an ICON

["W.J.M. Nelis" <nelis (at) nlr.nl>]

Hello Tom,

> Added the setting of the ICON to the code for the Juniper SSLVPN pair.
> To set the ICON:
> 	BB=/home/xymon/server/bin/bb
> 	BBDISP-127.0.0.1
> 	DEVICE=SSLVPN1 or SSLVPN2
> 	COLUNM="online"
> 	COLOR=green       for 'online'  server
>            =clear       for 'offline' server
> 	MSG="<the message to show when you click the icon>"
> 	$BB $BBDISP "status $DEVICE.$COLUMN $COLOR `date`
> 	
> 	${MSG}
> 	
Nice idea: set the status to "clear" if a node in a cluster is inactive. 
In this way there is no need to remember the previous state in the 
script, while a status change does not result in a warning or error 
message being sent.

> FYI:  I found that the Primary server has all the information if you do
> an
> 	snmpbulkwalk -v2c -c public IP-of-server1 or 2 .1 >FILENAME
> The size of the file is very large for the online server compared to the
> offline server.
> I did the command above for both servers and then did a diff of the 2
> files.
> I then looked for the Virtual IP address using:  grep -I "<virtual-IP>"
> *
>   
So the variable to be tested is  "ipAdEntAddr.<Virtual-IP>".

> If you find a better alternative, please let me know.
>   
No alternative yet found; I am glad that there is an easily accessible 
variable at all which contains this information.

Your idea's are now incorporated in my juniper (server-side) script, 
which started out as a measurement of the number of web users.

> -----Original Message-----
> From: W.J.M. Nelis [mailto:nelis (at) nlr.nl] 
> Sent: Monday, June 07, 2010 1:42 AM
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] TS - Adding an ICON
>
> Hello Tom,
>
>   
> > I am using a MIB check to verify that a device (in a set of HA 
> > devices) is the current one using the virtual IP address.
> >
> > I can tell from my scripting that the device has switched to the other
> >     
>
>   
> > of the HA pair.
> >
> > (A Juniper SSL-VPN pair).
> >
> > I will be using NET-SNMP on the XYMON server to gather the info using 
> > a crontab script.
> >
> >     
> Which MIB variable (OID) can be used to determine which device is the 
> one using the virtual IP address?
>
> Regards,
>   Wim Nelis.
>   
Regards,
 Wim Nelis.



*******************************************************************************************************
The NLR disclaimer (http://www.nlr.nl/emaildisclaimer) is valid for NLR e-mail messages.
*******************************************************************************************************